TEEMI 57 Bluetooth Barcode Scanner User Guide

TEEMI 57 Bluetooth Barcode Scanner

Product Information

• Product Name: Barcode Scanner
• Model: 57,58,62,67,68 DW/DB-V2.6

If the scanner does not work or buzzer rang “Di-Di-Di-Di-Di”, please stop using the scanner and charging it immediately.

Restore Defaults

2.4GHz scanner default setting 2.4GHz mode,use via USB receiver. Bluetooth scanner default setting bluetooth mode,use via bluetooth pairing. If the scanner does not work properly, Please scan the code“Wireless Restore Defaults”

Matching Operation(2.4G Mode)

1. Press the button, the buzzer rang ,the scanner starts.
2. Scan the “2.4G Mode” barcode, then scan the “Match” barcode.
3. Plug the receiver to your computer, the buzzer rang “ Di—Di”, which means 2.4G pairing is successful.
4. Open a text, put the cursor in, Scan any barcode to see if the barcode can be uploaded.

Matching Operation(Bluetooth Mode)
Bluetooth-related setting code apply only to Bluetooth-enabled products

1. Press the button, the buzzer rang ,the scanner starts.
2. Scan the “Bluetooth-HID Mode” barcode, then scan the “Match” barcode.
3. Enable bluetooth function on your device till find out“Barcode Scanner HID”, and click it to begin bluetooth pairing. Wait a few seconds, the buzzer rang “ Di”, which means bluetooth pairing is successful.
4. Open a text, put the cursor in, Scan any barcode to see if the barcode can be uploaded.

To show and hide iOS keyboard

SPP and BLE Mode

End Mark

Working Mode

• Two upload mode: Instant upload mode、storage mode.
• Instant upload Mode: Instant upload data to your computer Upload successfully: The green light flashed and the buzzer rang “ Di ”.
• Storage Mode: Scan and store barcode inside the scanner, and uploaded the data to your computer when you need it.

1. Save successfully: The green light flashed and the buzzer rang “ Di-en ”
2. Save failed: The red light flashed and the buzzer range “ Di—en”， This indicates that there was not enough memory to save the bar code. Please upload the saved bar code by scanning “Upload Date” and then clear the Memory by scanning “Zero cleaning”.
3. Upload completed: the buzzer rang “ Di-do-en ”.

Power and Standby Setup

Set the time for automatic shutdown

• Battery level indication
  Press the button, the scanner does not respond. Please charge the scanner at least for 30 minutes. If the scanner still cannot start, this indicates that the battery is broken and needs to be replaced.

• LED tips during charging
  Plugged the USB cable into the USB port of computer

1.  **Charging mode:** the red light is on.
2.  **Charging completed:** the red light goes out.

Buzzer Setup

Vibration ON/OFF
Only for products with vibration function

Uppercase and lowercase

Invoice Function

Output Interval of The Same Code
In continuous mode and automatic induction mode

Scan Mode Setting

Language

Hide the characters

• E.g. The bar code content is “123456789” , if you want to hide the previous two characters.
• The first: Scan “Hide the front characters”.
• The second step: Scan “Hide 2 characters”.
• The third step: “3456789” will be shown.

Add Prefix and Suffix

• The first: Scan “Add Prefix” or “Add Suffix” .
• The second step: Scan need to add the character code( Appendix 1).

Appendix

Appendix 1：Character comparison table

Appendix 2：Barcode Type ON/OFF

Appendix 3：CODE ID

Documents / Resources

| TEEMI 57 Bluetooth Barcode Scanner [pdf] User Guide
57 Bluetooth Barcode Scanner, 57, Bluetooth Barcode Scanner, Barcode Scanner, Scanner
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>