V I V O MOUNT-SG04 Desk Clamp Designed for Samsung OEM Monitor Stands Instruction Manual
- June 12, 2024
- V I V O
Table of Contents
V I V O MOUNT-SG04 Desk Clamp Designed for Samsung OEM Monitor Stands
Product Information Product Name: Desk Clamp
Designed for: Samsung OEM Monitor Stands
SKU: MOUNT-SG04
Manufacturer: VIVO
Contact Information:
- Website: vivo-us.com
- Email: help@vivo-us.com
- Phone: 309-278-5303
- Support Hours: Monday-Friday from 7:00am-7:00pm CST
Product Usage Instructions
-
Remove the protective film from Pad (C) and apply the pad to Upper Clamp (A).
-
Remove Locking Screws (A1) from Upper Clamp (A) using a Phillips screwdriver. Slide Base (A2) out from the clamp.
-
Remove the OEM Base and the Plastic Shroud from your Samsung display following the manufacturer’s instructions. Set screw aside for use in later step.
-
Install Base (A1) to the monitor stand using M4x20mm Screw (S-A) and a Phillips screwdriver.
-
Attach the Lower Clamp (B) to Upper Clamp (A) using M8x12mm Screws (S-B) and 5mm Allen Wrench (T-A). Secure clamp assembly to desktop in its intended location. Tighten by turning the hand bolt.
-
Slide the Samsung monitor with stand onto Upper Clamp (A).
Ensure the Sliding Plate (A2) is sliding into the slot on the attached base. Note: Two person installation is recommended. -
Secure monitor into place using the screws removed in Step 2 and a Phillips screwdriver.
-
The Plastic Shroud can be reinstalled following the manufacturer’s recommended instructions.
Desk Clamp Designed for Samsung OEM Monitor Stands
Instruction Manual
SKU: MOUNT-SG04
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
https://vivo-us.com/products/mount-sg04
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT
TIPOVER:
- NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.
- USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
TOOLS NEEDED
ASSEMBLY STEPS
STEP 1
Remove the protective film from Pad (C) and apply the pad to Upper Clamp (A).
STEP 2
Remove Locking Screws (A1) from Upper Clamp (A) using a Phillips
screwdriver. Slide Base (A2) out from the clamp.
STEP 3
Remove the OEM Base and the Plastic Shroud from your Samsung display following
the manufacturer’s instructions. Set screw aside for use in later step.
STEP 4
Install Base (A1) to the monitor stand using M4x20mm Screw (S-A) and a
Phillips screwdriver.
STEP 5
Attach the Lower Clamp (B) to Upper Clamp (A) using M8x12mm Screws (S-B) and
5mm Allen Wrench (T-A).
Secure clamp assembly to desktop in it’s intended location. Tighten by turning the hand bolt.
STEP 6
Slide the Samsung monitor with stand onto Upper Clamp (A). Ensure the
Sliding Plate (A2) is sliding into the slot on the attached base.
NOTE: Two person installation is recommended.
STEP 7
Secure monitor into place using the screws removed in Step 2 and a Phillips
screwdriver.
STEP 8
The Plastic Shroud can be reinstalled following the manufacturer’s recommended
instructions.
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- VESA Adapter Bracket Kit – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>