POWER-LITE LED-T8 Tube Instruction Manual
- June 12, 2024
- POWER-LITE
Table of Contents
POWER-LITE LED-T8 Tube Instruction
Product Information
The LED T8 Tube is a lighting product designed for interior or waterproof applications. It features a single end input, in compliance with CE regulations. The product operates within a voltage range of 90-265V and a temperature range of -20°C to 40°C. Please note that disassembling or modifying the product is strictly prohibited.
Product Usage Instructions
Important Information
- Open the package, which should include a T8 LED Tube light and an instruction manual.
- The LED Tube light is suitable for interior or waterproof lighting only.
- Use the product within the specified voltage and temperature ranges (90-265V and -20°C to 40°C).
- Do not disassemble or modify the product.
Installation Instructions – PART 1
New Luminaires
- Switch off the electricity.
- Turn the conventional tube light 90°.
- Remove the conventional tube light.
- Turn the starter anticlockwise and remove it.
- Click the LED starter into the starter holder and turn it clockwise. (Fuse to be ordered separately)
- Insert the LED tube light into the lamp holder.
- Secure the position by turning the LED light by 90°.
- Switch on the electricity.
Installation Instructions – PART 2
Retrofit Traditional Luminaires with Electronic Ballast (To be done by a
qualified electrician)
- Switch off the electricity.
- Disconnect all wires that connect the ballast.
- Remove the ballast.
- Rewire as per the diagram provided.
- Install the LED Tube.
Guarantee
This product is guaranteed for a period of 3 years from the date of purchase.
The guarantee is invalidated in the following cases:
- Improper use, tampering, removal of the Q.C. date label
- Installation in an improper working environment
- Installation not according to the current edition of the I.E.E. Wiring Regulations (BS7671)
The guarantee is also invalidated if the luminaire has been Mega tested. If the product fails during the guarantee period due to correct installation and return of the faulty unit, it will be replaced free of charge. Please note that any installation costs associated with the replacement are not covered. Your statutory rights are not affected, and specifications are subject to change without prior notice.
Important: To quickly identify between magnetic or electronic ballasts, note that a magnetic ballast system has a starter, while an electronic ballast does not have a starter.
Compliance: RoHS, SAA
Specifications
- 90-265V
- 10-26W
- 54-144pcs 2835 LED
- 900-2500 Lumen output
- 4000K / 6000K Colour temperatures
- 120′ Beam angle
- 25,000 Hours life expectancy
- 3 Year guarantee
- IP20
Overview
This product has single end input according to CE regulation.
Important Information
-
Open the package, this should include a T8 LED Tube light, and an instruction manual
-
The LED Tube light is only suitable for interior or waterproof lighting. (see figure below).
-
Use only in 90-265V and -20′ – 40’C.
-
Do not disassemble and modify the product.
Installation Instructions – PART 1
In order to ensure the LED Tube light works correctly and saves energy, please read this manual carefully before installation.
New luminaires
Retrofit traditional luminaires with Magnetic Ballast
- Step 1. Switch off electricity.
- Step 2. Turn the conventional tube light 90′.
- Step 3. Remove the conventional tube light.
- Step 4. Turn the starter anticlockwise and remove the starter.
- Step 5. Click the LED starter into the starter holder and turn clockwise. (Fuse to be ordered separately)
- Step 6. Insert the LED tube light into the lamp holder.
- Step 7. Secure the position by turning the LED light by 90′.
- Step 8. Switch on electricity.
Installation Instructions – PART 2
Retrofit traditional luminaires with electronic ballast (To be done by a qualified electrician)
- Step 1. Switch off electricity.
- Step 2. Disconnect all wires that connect ballast.
- Step 3. Remove the ballast.
- Step 4. Rewiring as diagram below.
- Step 5. Install LED Tube.
IMPORTANT:
How to quickly identify between magnetic or electronic ballasts:
Magnetic ballast system has a starter, there is no starter with an electronic
ballast.
Guarantee
This product ls guaranteed for a period of 3 years from the date of purchase.
The guarantee is invalid in the case of Improper use, tampering, removal of
the Q.C. date label, Installation in an improper working environment or
Installation not according to the current edition of the I.E.E. Wiring
Regulations (BS7671).
The guarantee Is also invalidated if the luminaire has been Mega tested.
Should this product fall during the guarantee period it will be replaced free
of charge, subject to correct Installation and return of the faulty unit.
We do not accept responsibility for any installation costs associated with the
replacement of this product. Your statutory rights are not affected. We
reserve the right to alter specifications without prior notice.
Phone: 1800 909 306
Website: nedlandsgroup.com.au
E-mail: sales@nedlandsgroup.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>