OXO 11303700 Good Grips Triple Task Kitchen Timer Instructions
- June 6, 2024
- OXO
Table of Contents
OXO 11303700 Good Grips Triple Task Kitchen Timer
How to Use Stopwatch Mode
Select a timer using the Timer Buttons. Ensure timer is at zero. Press Start/Stop button. Timer will begin counting up until you press the Start/Stop Button again. There will be a + symbol next to a timer to indicate it’s in Stopwatch Mode.
Adjusting the Volume
Hold down the 0 button until the screen changes. Select your volume level by pressing one of the Timer Buttons; T1 is the lowest setting, T3 is the loudest. Press the 0 button again to set your volume.
Power
Timer takes three AAA batteries (included) to operate.
The screen will go into standby mode after 60 seconds to preserve power, but
any active timers will continue running. Press any button to wake the Timer
up.
Cleaning & Care
Do not submerge Timer in water. To clean, wipe surface with a damp cloth.
How to Set Countdown Timers
Use the Timer Buttons (T1, T2, T3) to select which timer you want to set. Once your desired timer is selected, use the Number Buttons to select the amount of time. Time is displayed in hours, minutes, and seconds (HH:MM:SS).
Press the Start/Stop Button to start timer. Press again at any time to pause or stop the timer. In this mode, timer will count down and will beep when it reaches zero. The timer will then start counting up and a plus sign will appear until Start/Stop button is pressed to stop the timer.
Note: Timer 1 will beep once when it reaches zero, Timer 2 will beep
twice, and Timer 3 will beep three times.
Use the Timer Buttons to switch between timers and use the number buttons to
set additional timers. This will not affect any timers already running.
Memory/Clear Button
Press the Memory/Clear button to reset the timer back to zero at any time.
If you press the Memory/Clear button while a timer is at zero, it will recall
the last time that timer was set at.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>