KOAMTAC SLED-MSRIC User Guide
- June 6, 2024
- KOAMTAC
Table of Contents
SLED-MUSIC
Quick Guide
116 Village Blvd, Suite 305, Princeton, NJ 08540 USA
T: + 1-609-256-4700 F:
+1-609-228-4373
info@koamtac.com
www.koamtac.com
©2021 KOAMTAC, Inc.
QG_SLED-MSRIC_20210728
Product Introduction
The SLED-MSRIC is a companion module for the KDC470 and the SKXPro/5. It provides features like a magnetic card reader (MSR) and IC card reader (ICCR).
**SLED-MSRIC Diagram
**
How to turn on and of
The SLED-MSRIC does not have its own power system. The power is supplied by the KDC470 or the SKXPro/5 (via the XCover Pro/5 Phone).
- To power on or off a KDC470, simultaneously press the SCAN and DOWN buttons for 3 seconds. The KDC will beep when turned ON or OFF. The KDC will sound like a long beep when it is ready to use.
- Regarding the SKXPro/5, you must first power on the phone. To power on the XCover Pro/5, press and hold the SIDE key for a few seconds. To power off the Cover Pro/5, press and hold the VOLUME DOWN and SIDE key simultaneously, or alternatively, open the notification panel and tap the power icon. To locate the CAN button, DOWN button, or other keys on the phone, reference the product diagram found in the Quick Guide for the KDC470 or SKXPro/5.
Assembly ManuaL
The SLED-MSRIC can be assembled and attached to KDC470 or SKXPro/5. For more detailed information, please refer to the SLED-MSRIC assembly manual. The images are shown below display the SLED-mPOS companion for demonstration purposes).
How to Assemble into KDC470
What’s in the Box?
One (1) of the following devices:
- KDC470 SLED-mPOS Companion
KDC470 SLED-MSRIC Companion
And:
- 4 screw caps
- 4 screws + 1 extra
*KDC470 sold separately. Tweezers and PHO screwdriver (not included) will be necessary to complete assembly.
Assembly Instructions
- Using tweezers, carefully remove all four (4) screw caps from the back of the KDC470. (A)
- Remove all four (4) screws from the back of the KDC470. (B)
- Remove the cover plate from the back of the KDC470. (C)
- Using tweezers, carefully remove the top two (2) screw caps from the back of the KDC470. (D)
- Align the screw holes of the SLED-mPOS or SLED-MSRIC Companion with the screw holes of the KDC470. (E)
- Use the four (4) included screws to attach the SLED-mPOS or SLED-MSRIC to the KDC470. (F)
- Attach the four (4) included screw caps to the KDC470 SLED-mPOS or SLED-MSRIC Companion. (G)
How to Assemble into SKXPro/5
What’s in the Box?
One (1) of the following devices:
- SKXPro/SKX5 SLED-mPOS Companion
- SKXPro/SKX5 SLED-MSRIC Companion
And:
- 1 contact PCB
- 4 screw caps
- 4 screw caps + 1 extra
*SKXPro/SKX5 sold separately. Tweezers and PHO screw driver (not included) will be necessary to complete assembly.
- Using tweezers, carefully remove all four (4) screw caps from the back of the SKXPro/SKX5. Then, remove all (4) screws from the back of the SKXPro/SKX5. (A)
- Separate the companion cover from the SKXPro/SKX5 by removing the terminal protective tape with tweezers. (B)
- Attach the contact PCB to the SKXPro/SKX5. (C)
- Align the screw holes of the SLED-mPOS or SLED-MSRIC Companion with the screw holes of the SKXPro/SKX5. Use the four (4) included screws to attach the SLED-mPOS or SLED-MSRIC Companion to the SKXPro/SKX5. (D)
- Attach the four (4) included screw caps to the SKXPro /SKX5 SLED-mPOS or SLED-MSRIC Companion. (E)
Operation
Micro USB Port
The SLED-MSRIC has its own USB port on the side.
For KDC470 (KDCSLED-MSRIC), the port is used to upgrade the MSRIC firmware.
For SKXPro/5 (SKXSLED-MSRKC), the port is used to upgrade the MSRIC firmware
and used for the data communication with SKXPro/5 and with the XCover Pro/5
phone.
LED Indicato r
The SLED-MSRIC has one set of LEDs (two LEDs) on the front.
If the IC card is inserted and read successfully, the LED turns green. If the
reading is failed, it turns red.
If the magnetic card is swiped and read successfully, the LED stays lights
green for 0.3 seconds and if not, it says in red for 0.3 seconds.
For KDC470 (KDCSLED-MSRIC), the port is used to upgrade the MSRIC firmware.
Useful Special Barcodes
There are several useful special barcodes to configure the SLED-MSRIC.
MSR (Magnetic Stripe Reader)
ICCR (IC Card Reader)
MSRIC Firmware Upgrade Port (Only for SKX-SLED-MSRIC)
Usage
Using other Developed Applications with free SDK – Android/iOS
A Software Development Kit (SDK) for Android and iOS is available to all KOAMTAC customers to ensure the smooth development of applications that work seamlessly with a KDC scanner. It’s easy to request the SDK from the KOAMTAC website:
a) On any web browser, open www.koamtac.com
b) Navigate to SUPPORT > Downloads > SDK
c) Complete the form and submit it.
After submission, a KOAMTAC representative will reach out regarding the next
steps for completing the SDK Agreement. The SDK package will have libraries,
documents, a sample application, and its source code.
Product Specifications
| Physical | Design | KDC470/SKXPro/SKX5 Sled Companion |
|---|---|---|
| Size 2.56″ x 4.13″ x 0.39″ |
65 mm x 105 mm x 9.8 mm
Weight| 2.33 oz (66 g)
Functionality| Supporting OS| Android / iOS
Keys| No
Buzzer| No
LED Indicator| 2 LED’s
USB Port| Micro USB Port
(KOC470: Only for MSRIC Firmware Upgrade Port
SKXPro/5: Selective for either MSRIC Firmware
Upgrade Port or SKXPro/5 Sled/Phone Access Port)
Memory| RAM| 128KB
ROM| Internal Flash ROM 1MB
External Flash ROM 4MB for Encrypted Keys
Environment| Drop Spec| 4 ft (1.2 m)
IP Rating| N/A
Operating Temp.| -4 T to 122 °F (-20 °C to 50 °C)
Storage Temp.| -4 T to 140 °F (-20 °C to 60 °C)
Humidity Spec| 5% – 95% (non-condensing)
Regulatory
Conformance| Laser Safety| N/A
LED Safety| N/A
Regulatory| CE/FCC/KC/RoHS
Payment| EMV Level 1 Contact
Standard
Supported| MSR Standard & Type| ISO 7810, 7811, 7813, AAMVA, Custom Data
Format
MSR Read Card Format /
Handling Method| Track1, Track2, Track3 /
Manual swipe, Bidirectional
IC Card Reader Standard| 1507816 (T=0, T=1)
IC Card Reader Card Type| 1507816 Class A, B, C (5V, 3V, 1.8V) Smart Cards
IC Card Reader Compliance| EMV Level 1 Contact
Data Encryption Method| AES128/192/256, DES/TDS, RSA (2048)
See Reference Manual for more detailed information.
Visit store.koamtac.com to purchase additional
KDCs and accessories.
QG_SLED-MSRIC_20210728
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>