EMTEK Back To Back Door Pull Installation Guide
- June 3, 2024
- Emtek
Table of Contents
EMTEK Back To Back Door Pull
Installation
-
Door Prep
-
Install Outside Grip
From the inside, install and tighten Bevel Head Machine Screws to the outside grip with a flat-blade screwdriver.
-
Install Inside Grip
Mount inside grip onto Bevel Head Machine Screws.
Tighten set screws (2 places) on inside grip.
Secure to door with hex wrench (provided)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>