NATHAN Terra Fire 400 RX LED Hand Torch Instructions
- June 12, 2024
- NATHAN
Table of Contents
Terra Fire™ 400 RX
USAGE INSTRUCTIONS
To turn on, press and hold power button (1) that is integrated in to the hand grip for 2-3 seconds.
Press repeatedly to cycle through modes.
To turn off, press and hold power button for 2-3 seconds.
Double click power button to activate strobe from any other mode. Single click to return to low mode.
To turn on rear lighting, press and hold second power button (2) that is integrated in to the hand grip for 2-3 seconds. To turn off, press and hold power button for 2-3 seconds.
TO RECHARGE:
Plug supplied USB cord in to a USB power source (500mA minimum) and then plug gently in to the covered charge port (3) at the top of the unit. A red LED will light up to indicate charging is occurring and a green light indicates the Terra Fire™ is fully charged.
Charge time is 5 hours for a fully depleted battery.
When fully charged, unplug Terra Fire™ from USB power supply, return port cover gasket to original position and store charger cord until next use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>