NATHAN Hyperbrite Orb LED Clip-on Light User Manual
- June 12, 2024
- NATHAN
Table of Contents
Hyperbrite Orb™
USAGE INSTRUCTIONS
» Press and hold power button for 2-3 seconds to turn on.
» Press repeatedly to cycle through modes.
» Press and hold power button for 2-3 seconds to turn off.
TO REPLACE BATTERY:
» Locate notch on bottom of HyperBrite Orb under power button.
» Using a coin or flat head screw driver insert into notch and gently turn to
remove back of HyperBrite Orb™.
» Replace two CR2032 batteries.
» Put backing in place and squeeze until front and back snap together.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>