EDIFIER W180T True Wireless In-Ear Headphones Instruction Manual

EDIFIER W180T True Wireless In-Ear Headphones

Product Information

Product Name: W180T True Wireless In-Ear Headphones

Model: EDF2000725

Manufacturer: Edifier International Limited

Power Input: 5V 200mA (Earbuds), 5V 1A (Charging case)

Controls

• Left Touch Panel: Single tap, double tap, and long press
• Right Touch Panel: Single tap, double tap, and long press

Product Usage Instructions

Power ON/OFF

To power on the headphones, take them out of the case. The blue LED will be lit for 1 second. To power off the headphones, place them back in the case.

Pairing

To pair the headphones:

1. Take the headphones out of the case.
2. Press and hold the touch panel on either earbud for 1-3 seconds. The red and blue LEDs will blink rapidly.
3. In your device settings, select “EDIFIER W180T L” or “EDIFIER W180T R” to connect.

Note: For the first-time pairing, the red and blue LEDs will blink rapidly when the headphones are taken out of the case. Follow step 2 and 3 to connect.

Note: For subsequent use, the earbuds will automatically connect to the last device used.

Note: If you have already paired one earbud with your mobile phone, you can repeat the above steps to pair the other earbud with the mobile phone.

Reset

To reset the headphones:

1. Take the headphones out of the case.
2. Make sure the earbuds are not connected to any Bluetooth devices.
3. Respectively press and hold the touch panel on both earbuds for 8 seconds. The blue LED will blink rapidly 6 times and then turn off, indicating that the pairing record has been cleared.

Left & Right Connection

To connect the left and right earbuds:

1. Take the headphones out of the case.
2. Make sure the earbuds are not connected to any Bluetooth devices.
3. Quickly tap the touch panel on both earbuds 2 times and hold until the blue LEDs blink rapidly. This indicates that the left and right earbuds are connecting.

Charging

To charge the earbuds:

1. When you hear a low battery prompt tone, place the earbuds in the charging case.
2. The red LED on the charging case will be steady lit while charging and turn off when fully charged.

To charge the charging case:

1. Connect the case to a power source using the included Type-C charging cable.
2. The red LED on the charging case will be steady lit while charging and turn off when fully charged.

Note: Do not charge the product when there is sweat or other liquids inside the charging port, as it may damage the product. For more information, please visit the Edifier website.

Power ON/OFF

1. Power ON when taken out of the case.
2. Power OFF when placed in the case.

Pairing

1. Taken out of the case.
2. Press and hold the touch panel on either earbud for 1-3s. Red and Blue LED will blink rapidly.
3. Select “EDIFIER W180T L” or “EDIFIER W180T R” in your device setting to connect.

Pairing for the first time

1. Taken out of the case. Red and Blue LED will blink rapidly.
2. Select “EDIFIER W180T L” or “EDIFIER W180T R” in your device setting to connect.

Note

1. For subsequent use, the earbuds will auto-connect to device used last time.
2. After you complete the Bluetooth pairing between the one earbud and the mobile phone, you can also repeat the above steps to pair the other earbud with the mobile phone to realize the operation of any single earbud.

Reset

1. Taken out of the case.
2. The earbuds are not connected and not connected with any Bluetooth devices.
3. Respectively press and hold the touch panel on earbuds for 8s, Blue LED blinks 6 times rapidly and turn off, then the pairing record will be cleared.

Left & Right connection

1. Taken out of the case.
2. The earbuds are not connected and not connected with any Bluetooth devices.
3. Quickly tap the touch panel on both earbuds 2 times and hold to wait until the blue LEDs blink rapidly, then left & right will start connecting.Blue LED will blink twice in 5s after connected.

Charge

Earbuds

1. When hearing low battery prompt tone, please place the earbuds in the case for charging.
2. Red LED is steady lit when charging and off when fully charged.

Charging case

1. Please connect the case to power source with the included Type-C charging cable for charging.
2. Red LED is steady lit when charging and off when fully charged.

Input: 5V 200mA(Earbuds) 5V 1A(Charging case)

Controls

Note

1. Please do not charge the product when there is sweat or other liquids inside the charging port, which may damage the product.
2. Images are for illustrative purposes only and may differ from the actual product.

For more information, please visit our website:

• www.edifier.com
• @Edif ierglobal
• @Edif ier_Global
• @Edif ier_Global

Model: EDF2000725

• Edif ier International Limited
• P.O. Box 6264
• General Post Office
• Hong Kong
• www.edifier.com
• © 2021 Edif ier International Limited. All rights reserved.
• Printed in China

NOTICE

• For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.
• Products of EDIFIER will be customized for different applications.
• Pictures and illustrations shown on this manual may be slightly different from actual product. If any difference is found, the actual product prevails.

References

• Headphones, Speakers | A Passion for Sound -【Edifier USA】

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>