Minoston MP23W Wi-Fi Outdoor Plug 2 Outlets Instruction Manual

Minoston MP23W Wi-Fi Outdoor Plug 2 Outlets

Meet your new smart Plug !

(A) Manual / Program button
Single press: manually turn on/off your device simultaneously.
Hold 5s: initiate App-configured Mode
*(B) Smart Outlet 2
This is your smart outlets that will be included in your smart home.
(C) Protector**
Insert in connector when not in use. For outdoor use IP65 Rated

Note: Do not plug an extension cord in this smart plug.

Note:
Your device may need to be within 100 feet of the controller to be included. If so, include the device to the network within 10 feet of the controller and relocate it to the desired position in your home. Be sure to refresh the network if the device is included in this manner.

APP Connection

Note:
Your device needs to be installed in the network coverage of your home router.

1. Please scan the QR code to download the application “Smart Life”.
2. If you cannot download Smart Life app, please search “Smart Life” on Google Play (for Android phone) or Apple Store (for iOS phone) to download. After you download the Smart Life App and register a new account, please follow the instructions below to set up your smart switch.
3. The smart switch can be also used with Amazon Echo and Google Home. Please scan the QR code below and follow the instructions if you have any trouble pairing with them.

Introduction

The Minoston MP23W is an enabled 15A outdoor smart plug designed for use for most residential lighting and motor applica-tions. It’s compatible with LED, halogen, incandescent, xenon, fluorescent and compact fluorescent bulbs. Works with Amoazon Alexa, Google Assistant.
One smart outlet, you can use free App, or voice control by Alexa and Google Assistant to operate your devices in your home.

Specifications

Power: 120V AC, 60Hz
Total(Both Outlets):15 Amp Max
Wireless Frequency: 2.4GHz
Wireless Standard: IEEE802.11b/g/n
Operating Temp of -4° F~122° F
Please vertical hang on the wall.

www.minoston.com

The plug is designed to be angled 45 degrees, allowing you to make the most of your home wall outlet. Use our screws and anchor to lock it in the wall.(optional) When the white LED is flash slowly (AP mode), please hold the button 5 seconds until the LED change to blinks rapidly–Back to EASY MODE.

Note:

1. Our products supports Bluetooth quick-fit and 2.4GHz Wi-Fi network.
2. 3 connection network modes: Bluetooth quick-fit Mode, Easy Mode, AP Mode. Choose the most suitable mode to configure the network.
3. Please operate quickly when the white LED indicator blinks rapidly.
4. When indicator flash enters the network, complete standard operation within the 3 minutes.
5. If you failed to connect with Wi-Fi network, please try to operate several

Bluetooth quick-fit Mode ◀

1. Plug-in the device directly to the wall outlet once pluged in, it will enter into Buletooth auto-connection mode. The auto-connection comes with white LED blinks. The LED will blinks 3 minutes.
   If it stopped, please hold the button 5 seconds until the LED blinks again.

2. Turn on your Phone bluetooth.

3. Tap ‘+’ to add this plug in the “Smart Life” APP.

4. You’ll see “Devices to be added”—“Go to add”.

5. Click to “Add ”

6. Enter the Wi-Fi Password (Your phone should have connected to the same Wi-Fi first).

7. Wait for the app to connect to your Wi-Fi until it’s 100%.

8. Click the new smart plug you just added and you can start using it now.

When the Bluetooth is off, APP will remind: “You are advised to enable Bluetooth”.

Easy Mode

1. Tap ‘+’ to add a device in your app
2. Select “Electrician ”- “Socket (Wi-Fi)”
3. Enter the Wi-Fi Password
4. Hold the button 5 seconds until “white” LED blinks rapidly.
5. Click to “Continue ”
6. Select “is fast blinking(0.5s/time)”
7. Wait for it’s 100% (LED stays in green 3 seconds.)
8. Click and edit the name of switch!

Unlock operation: click unlock on the APP or press the device button 4 times quickly.
CAUTION – PLEASE READ!
This device (MP23WD) is intended for installation in accordance with the National Electric Code and local regulations in the United States, or the Canadian Electrical Code and local regulations in Canada. If you are unsure or uncomfortable about performing this installation consult a qualified electrician.

MEDICAL EQUIPMENT
Please DO NOT use this plug to control Medical or Life Support equipment. This device should never be used to control the On/Off status of Medical and/or Life Support equipment.

OTHER WARNINGS
Risk of Fire
Risk of Electrical Shock
Risk of Burns

FCC warning:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must acceptany interference received, including interference that may cause undesired operation.
   changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
   NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

References

• Minoston - Smart Life is Easier than Your Imagination

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>