Orange Electronic HT430 Tire Pressure Monitoring System Instructions

June 6, 2024
Orange Electronic

Orange Electronic HT430 Tire Pressure Monitoring System Instructions
Orange Electronic HT430 Tire Pressure Monitoring
System

Assembly Instructions

  1. Jack up the car and demount the tire.
    Assembly Instructions

  2. Remove original valve.
    Assembly Instructions

  3. Sensor Assemble.
    Assembly Instructions

  4. lighten up screw.
    Assembly Instructions

  5. Install the tire from left side of the valve clockwise direction, avoid tire bead hits valve and sensor.

  6. Balance the tire.
    Assembly Instructions

  7. Mount the lire to its position.

Federal Communications Commission (FCC) Statement

15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.

15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause interference and
  2. this device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals