LASER KB-IPAD109-23 Wireless Keyboard Case for iPad User Manual
- June 12, 2024
- Laser
Table of Contents
LASER KB-IPAD109-23 Wireless Keyboard Case for iPad
WHAT’S IN THE BOX
- Wireless Keyboard
- USB A to USB C charging cable
- User manual
SPECIFICATIONS
| Charging Port | USB-C |
|---|---|
| Charging Time | 2-3 Hours |
| Awaken Time | ≤2 Seconds |
| Working Temperature | 0 °C~40°C |
| Battery Capacity | 420mAh |
| Connect Distance | ≤10m |
COMPATIBILITY LIST
| Device: | Apple iPad 10th 10.9inch (2022) |
|---|---|
| Models: | A2696/A2757/A2777 |
PRODUCT DIAGRAM
Note:
The blue printed functions on the keyboard can be activated while
simultaneously pressing along with the “Fn” key
INDICATOR LIGHT
Caps Indicator Light:
Light on means uppercase input, light off means lowercase input.
Wireless Indicator Light:
Press “Fn + C”. A slow blinking blue light will indicate the device is in bluetooth pairing mode. The light will turn off once connected.
Charging Indicator Light:
- Blinking – Low Battery (Red)
- Device is Charging (Red)
- Charging Complete (Green)
OPERATION INSTRUCTIONS
- Slide the ON/OFF button to power on the keyboard, then press “Fn + C” simultaneously to put the keyboard into Bluetooth pairing mode.
- Search for and select KB-IPAD109 on the device you are connecting to. If a password is requested, check the screen of the device then type the password into the keyboard and press the “ENTER” key. (Or pair without a password)
- The keyboard should now be paired and ready to use.
COMMON CONNECTING PROBLEMS AND SOLUTIONS
- Make sure you have turned on the power and the battery is charged.
- Make sure the keyboard is within the effective working distance.
- Make sure the keyboard has paired with a device via Bluetooth.
Note:
This keyboard will go to sleep if no buttons are pressed within 10 minutes.
Press any button to wake up.
TROUBLESHOOTING
Why doesn’t the blue LED light activate when I turn the power switch on?
Your keyboard has no battery power. Please charge the keyboard then try again.
Why is my device unable to find the keyboard in the Bluetooth search screen?
Press the “FN + C” buttons on the keyboard simultaneously to put the keyboard into pairing mode. You should see the status LED blinking blue.
I can see the keyboard listed after searching, but it says, “connection failed”.
Turn off the keyboard. Remove the keyboard from your paired devices, then try to re-pair.
When I attempt to pair the keyboard, my device asks for a passcode.
This is a security feature of your device. Your device should generate a passcode which you can type into the keyboard, then press the “ENTER” key to finish pairing.
Why can’t I type in other languages?
The language input setting is on your device. You will need to change this setting on your device’s keyboard language options.
SAFETY TIPS
- Do not place heavy objects on the keyboard.
- Do not dissemble the product.
- Keep the product away from oils, chemicals, and organic liquids.
- Clean with a dry soft cloth.
- Keep away from sharp objects.
Laser Corporation is 100% Australian owned & operated. To get the most out of your product please read the user manual carefully and keep for future use.
For specific information relating to your product such as Spare Parts, FAQs, Warranty claims, and more, please scan the following QR code:
CUSTOMERS SUPPORT
Visit our website www.laserco.com.au
Check us out at www.youtube.com/lasercoau
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>