KLH Kendall 2B Bookshelf Loudspeaker User Guide

: June 12, 2024
: KLH

Table of Contents

WELCOME
UNPACKING
CONNECTING YOUR BOOKSHELF LOUDSPEAKERS
AMPLIFICATION
BI-AMPLIFICATION
ROOM POSITION
WARRANTY
SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**KLH Kendall 2B Bookshelf Loudspeaker User Guide

**

WELCOME

Thank you for purchasing one of the best sounding loudspeakers ever produced. At KLH, we have been making high-quality components since 1957, and we take pride in making your music and movies the best experience possible.
FOR YOUR SAFETY
Important Safety Instructions!

READ these instructions.
KEEP these instructions.
HEED all warnings.
FOLLOW all instructions.
DO NOT use this apparatus near water.
CLEAN ONLY with dry cloth.
DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other heat producing appliances
ONLY USE attachments/accessories specified by the manufacturer.
DO NOT expose to excess moisture or liquids, and do not place containers with liquids on top of speakers.

The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.

C A UTIO N
RISK OF ELECTRIC SHOCK. DO NOT OPEN.

WARNING : Do Not Open! Risk of Electrical Shock. Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel

EU COMP LIANCE INFORMAT ION:
Eligible to bear the CE mark, Conforms to European Union EMC Directive 2004/108/EC; European Union Restriction of Hazardous Substances Recast (RoHS2) Directive 2011/65/ EC; European Union WEEE Directive 2002/96/EC

KLH and the KLH logo are registered trademarks of Kelley Global Brands Inc., registered in the U.S. and other countries.

WEEE NOTICE
Note: This mark applies only to countries within the European Union (EU) and Norway

This appliance is labeled in accordance with European Directive 2002/96/EC concerning waste electrical and electronic equipment (WEEE). This label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling.

UNPACKING

Place package on the floor or table top with the box flaps up. Cut the tape with a utility knife to open the package. Fold the carton flaps back and carefully slide the speaker and packaging from the box, or turn the box over with flaps open and remove the box. Stand the speaker and packing upright, making sure the speaker is right side up, and remove the packing material.

CONNECTING YOUR BOOKSHELF LOUDSPEAKERS

This bookshelf loudspeaker has the same quality nickel-plated binding posts that will accommodate stripped wire, spade connectors or banana plugs. Be sure to use quality speaker cables, up to 12 gauge (AWG). The lowest gauge possible is recommended. Before using banana plugs, be sure to remove the black and red inserts on the binding posts. The straps connecting the binding posts should remain in place for conventional wiring, but may be removed where bi-wiring is preferred. See the following diagrams in the AMPLIFICATION section for further instruction.

AMPLIFICATION

Conventional amplification involves a single stereo amplifier wired to a single set of binding posts with straps connecting the second set of posts as seen in diagram above. Simply attach the positive wire + to the red post, and the negative wire – to the black post.

BI-AMPLIFICATION

This connection method (see diagram below) uses two separate two channel amplifiers to power one set of speakers. One amplifier is attached to one set of binding posts, and another identical amplifier is attached to the other set of binding posts. This is referred to as bi-amplification

NOTE:
Binding post wrench is included

ROOM POSITION

Placement of your bookshelf loudspeakers is a personal preference, but it is recommended that speakers be placed at least 6 feet apart whether they are being used for a stereo application, or as the main left and right channels for a home theater. For best imaging and separation, listening distance from the speakers should be about 1.5 times the distance the speakers are apart from each other

Example: If the distance between each speaker and the listening position is 9 feet, then the speakers should be 6 feet apart from one another. Be sure that loudspeakers are placed at least 12 inches away from any wall. Further adjustments can be made to optimize your listening experience.

WARRANTY

Our 10 year warranty begins from purchase date of the item. (Receipt Date) Warranty registration must be completed at KLHAUDIO.com/warranty. Registration of the product must be completed within 120 days of purchase for warranty validation. Original receipt of purchase must be retained for proof of purchase. For warranty or service issues, please contact authorized KLH dealer. The warranty covers any production and/or material defects of the product. This warranty is non-transferable

The following is NOT COVERED by the warranty:

Accidents, misuse, poor maintenance, electrical overloads such as lightning or voltage.
Incorrect use of product.
Altered serial number.
Transportation costs for service call.
Purchase of KLH products from unauthorized reseller.

Replacement item cannot exceed the cost of the item under warranty. The supplier is responsible for only repair or replacement. KLH toll free number is 1-833-554-8326

SPECIFICATIONS

Kendall 2B Bookshelf Loudspeaker

Enclosure: 2-Way, Bass-Reflex
Power handling: 200 Watts.
Peak Power Handling : 800 Watts
Frequency Response: 55Hz-20kHz.+/-3dB
Impedance : 8Ω.
Crossover Frequency : 2,500Hz
Sensitivity in Room: 89dB. 2.83V/1m
Sensitivity Anechoic : 86dB. 2.83V/1m
Tweeter: Single 1” Titanium Dome Tweeter
Woofer: Single 6.5” Aluminum Cone Woofers
Finishes: English Walnut Wood Veneer or Black Oak Wood Veneer
Dimensions: 13.25” x 7.75” x 8.5” (H x W x D).
Weight : 13 lbs