AMCREST AMPS6E4P-AT-65 6-Port POE Switch User Manual

: June 12, 2024
: Amcrest

Table of Contents

AMCREST AMPS6E4P-AT-65 6-Port POE Switch
Important Safeguards & Warnings
Product Overview
- Features
Device Overview
Technical Specification
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AMCREST AMPS6E4P-AT-65 6-Port POE Switch

6-Port POE Switch
User’s Manual version I.O.O

Important Safeguards & Warnings

Attention:
Please read the following safeguards and warnings carefully before using the product in order to avoid damages and losses.

Note:

Do not expose the device to Soot, high humidity or dust. Doing so may cause fire or electric shock.
Do not install the device in direct sunlight as it may cause overheating and failure.
Installation of the unit should be via the compatible rack mount or securely on a flat surface.
Do not place the device on carpet or other insulating surfaces. Ex. Rugs, towels, rags, clothing, etc.
Do not block or impede airflow to or around the unit. Doing so may cause overheating, failure or fire.
Do not place stack or place objects on the unit.
This unit contains no user serviceable parts. Servicing should only be performed by approved technicians.

Warning:
Do not use a power supply other than the provided manufacturer power supply. Failure to do so may cause unit failure and/or damage.

Special Announcement:
This manual is for reference only.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks are the properties of Amcrest Technologies LLC.

Applicable Models:
The manual can be applied to the following model: AMPS6E4P-AT-65

Product Overview

Features

Common Features:

Two-layer commercial POE switch.
Supports IEEE802.3i 10 BASE-T, IEEE802.3u 100 BASE-TX, IEEE802.3x Flow Control, IEEE802.3af, Power over Ethernet,IEEE802.3at Power over Ethernet, IEEE802.3az EEE Protocols
MAC address list capacity is 2K.
Each RJ45 port supports MDI/MDIX auto flip and wire-speed forwarding functions.
All 10/ 100M auto-negotiation RJ45 POE ports support IEEE802.3af and IEEE802.3at standards.
Commercial wide temperature design.
Supports AC 100-240V 50/601-IZ Power Supply

Individual Features:

6-port POE switch supports 2 100M self-adaptive RJ45 UpLink ports and 4 10/ 100M self-adaptive POE RJ45 ports.
6-port POE switch with max 65W total power consumption.
1 POE Power Consumption Status Display.

Typical Application

The typical application of the device is shown in Figure l- 1.

Device Overview

2.1 6-Port PoE Switch

SN| Name

PoE Consumption Status

| ****

LED

| ****

Screen

| Note

Monitor the total power consumption of each

| ****

PoE port.

---|---|---|---|---|---
2| l, 2, 3, ‘-<| | ‘-< 10/l00M auto-negotiation RJ’-<5 ports.| | |
3| 5,6 (Uplink)| | 2 l00M self-adaptive RJ’-<5 ports.| | |
| ****

Switch, VLAN,

| ****

Extend

| Manually change between Switch, VLAN,| and| extended| modes.

Note: When VLAN is enabled, communication is isolated between downlinks and uplink. Downlinks do not communicate with each other.

POE Power Output
10/100 RJ45 POE Ports support IEEE802.af and IEEE802.3at power standards. Supports simultaneous power to each port using IEEE802.3at and using IEEE802.3af. Total power draw of the unit cannot exceed 65W.