Grace Company SM15 Quilt Perfect Ruler Feet Kit Instructions
- June 12, 2024
- Grace Company
Table of Contents
QUILT PERFECT
RULER FEET KIT
Compatible with entire
Q’nique 15 series
Instructions
SM15 Quilt Perfect Ruler Feet Kit
Parts Included:
| TrueTrack Foot
ACC-09-15257
---|---
| Precision Foot
ACC-09-15258
| Rolling Foot
ACC-09-15255
| Ruler 3×8 inch
ACC-05-15299
| SBHCS
M3 x 8 mm (x2)
HDW-03-10966
| Hopping Foot
Height Tool
SMP-04-12171
Tools Needed:
3 mm Allen Wrench (not included)
Foot Installation Instructions:
- To remove the Standard Hopping Foot, use the 3 mm Allen wrench and take out the M3 x 8 mm SBHCS.
- Select the hopping foot you want to install and use the 3 mm Allen wrench to loosely attach it to the machine with the M3 x 8 mm SBHCS.
- Move the machine off of the fabric and turn the handwheel to lower the needle to the lowest position.
- Slide the Hopping Foot Height Tool beneath the foot. Lower the foot until it rests on height tool. Tighten the M3 x 8 mm SBHCS with the 3 mm Allen wrench.
Usage Instructions:
These instructions will go over how to use each accessory foot with the
included ruler.
Ruler:
The ruler’s straight edge and markings will assist you in stitching straight
lines as well as measuring the length of your stitches.
Note: For best results, pair with the accessory ruler base for your
machine.
TrueTrack Foot:
Use this foot to keep the ruler close to the foot for consistent measuring.
- Put the lip side of the ruler in front of the hopping foot. Press together until the ruler clips into place. The clip will keep the ruler attached.
- Use the ruler’s edge and markings to stitch straight lines and to measure stitch length.
- The foot’s swivel system allows you to turn the ruler to measure stitches in any direction.
- To release the ruler, press down on the back of the clip behind the foot and pull the ruler away from the foot.
Precision Foot:
Use the Precision Foot’s pointers to align your stitches with the markings on
the ruler.
- Press the lip side of the ruler to the front of the hopping foot. The ruler should align with the pointers on the hopping foot at right angles.
- Hold the ruler against the foot to stitch straight lines and to measure stitch length. The swivel system allows you to turn the ruler to measure stitches in any direction.
Rolling Foot:
Use this foot to easily glide the ruler’s edge alongside the foot.
- Press the lip side of the ruler to the front of the hopping foot.
- Hold the ruler against the foot to stitch straight lines and to measure stitch length. The swivel system allows you to slide the ruler along the foot and measure stitches in any direction.
The Grace Company
Phone: 1-800-264-0644
www.graceframes.com
Documents / Resources
|
Grace Company SM15 Quilt Perfect Ruler Feet
Kit
[pdf] Instructions
SM15 Quilt Perfect Ruler Feet Kit, SM15, Quilt Perfect Ruler Feet Kit, Perfect
Ruler Feet Kit, Ruler Feet Kit, Feet Kit, Kit
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>