The Grace Company Gracie Laser User Manual

The Grace Company Gracie Laser User Manual

The Gracie Laser User Manual Parts List

SAFETY PRECAUTIONS

1. CAUTION: Use of controls, adjustments, or performance of procedures other than given in USER MANUAL may result in
   hazardous laser light exposure.

2. This product is safe to use in normal operations as described in these instructions. AVOID DIRECT EYE EXPOSURE.
   DO NOT LOOK DIRECTLY INTO THE LASER EMITTER.

Battery Installation: Use the battery

compartment opening tab to remove the battery cover. Batteries are inserted with their possitive pole (+) opposite each other. (Illustration shown)

The Grace Company certifies that the Gracie Laser complies withthe government FDA regulation 21CFR 1040.10 and 1040.11.

Specifications:

Power: Class II
Wavelength: 650nm
Output Power: 1mW
Battery Type: 2 AA
Battery Life: 150 Continuous hours
Weight: 31.2g Without Batteries
Dimensions: 6.929” L X 1.533” W
Color: Blue

Copyright January 1, 2016 Jim M. Bagley, GraceWood, Inc (Reproduction Prohibited) Version 2.1

Laser Assembly

Assembly Steps:

Step 1: Insert the M6x60mm Hex Head Bolt through the Hex Swivel Head with the rounded portion up.
Step 2: Continue by pushing the bolt through the Main Swivel Attachment and through the Laser Pointer.
Step 3: Tighten the M6 Knob onto the of of the M6x60mm Hex Head Bolt.

Carriage Installation:

Step 1: Insert the M6x45mm Hex Head Bolt through the Laser Pointer Assembly.
Step 2: Insert the M6x45mm Hex Head Boltthrough an available 1/4” hole in the TopPlatform. (If none of the available holes suit your needs, drill a 1/4” hole in the desired location.)
NOTE: The Laser Pointer may be mounted oneither side of the Top Platform, and is easily moved from one side of the Top Platform to the other. If you are using the Pedal Pusher, when mounting the Laser Pointer, make sure that it doesn’t interfere with your Pedal Pusher Levers.
Step 3: Secure the Laser Assembly and bolt to the Top Platform with the M6 Plastic Knob

For Sewing Machines With Handles- If using the Top Plate without handles you can install your Laser either on your pattern perfect bracket with an M6 X 20mm Hex
Bolt and an M6 Nylock Nut, as shown in Fig.MH-1A. Or you can install the Laser in theside holes used for the handles with an M6 X 20mm Hex Bolt and a Nylock Nut.

Gracie Laser Addendum

Additional Parts & Tools

SBHCS M5 x 16 mm

To attach the laser to the Cutie Frame, first assemble the laser. Attach the assembled laser to the side of the frame top plate with an M5 x 16 mm SBHCS and a 3 mm Allen wrench.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>