FELLOWES 92Cs Cross Cut Shredder Instruction Manual

FELLOWES 92Cs Cross Cut Shredder

• Please read these instructions before use.
• Do not discard: keep for future reference.

COMPONENTS

• A. Paper entry slot
• B. Control switch

1. ON/OFF (White)
2. < Undo
3. > Forward

• C. Pull-out basket
• D. Window
• E. Circles
• F. Cut-off switch power supply

1. OFF
2. ON

• G. Indicator lights

1. Overheating (red)
2. Open basket (red)
3. Basket full (red)
4. Remove paper (red)
5. SafeSense® LED (yellow)

• H. See instructions for safety

POSSIBILITIES

POLISH

• Model 92Cs
• Shreds: paper, plastic credit cards, staples, CDs/DVDs, and unopened unwanted correspondence
• Does not destroy: folded computer paper, self-adhesive labels, foil transparent materials, newspapers, cardboard, paper clips, laminated materials, folders for documents, X-rays and other plastic materials not listed above
• Dimensions of shredded paper:
• Clippings ………………………………………….. ……………………………………………………. ……..4mm x 38mm

Maximum:

• Number of sheets cut at one time . …………………………………………… ……………………………… 18*
• Number of CDs/cards inserted at the same time . ……………………………… ……………………. 1*
• Paper width . …………………………………………… ……………………………………………………. …..230 mm
• A4 paper (70 g), powered by 220-240 V, 50/60 Hz, 2.0 A. Paper with heavier grammage, higher humidity, or a power supply current other than the rated one may reduce performance.
• Maximum recommended number of cuts per day: 1000 sheets, 25 cards credit; 10 CDs/DVDs.

WARNING: IMPORTANT SAFETY INSTRUCTIONS – Read before use!

• Requirements for operation, maintenance, and servicing are included in the user manual. Read the entire operating manual before using the shredder.
• Keep away from children and pets. Keep your hands away from the slot input. Whenever the device is not in use, switch to position turned off or disconnected from the network.
• Keep inappropriate objects away – gloves, jewelry, clothes, hair, etc. into the shredder slot. If an object is pulled through the top slot set the switch to the Retract (0) position until the material is ejected.
• DO NOT use aerosols or lubricants to clean the shredder or its vicinity petroleum or spray lubricants.
• DO NOT USE THE SHREDDER TO CLEAN COMPRESSED AIR.
• Fumes from petroleum-based carriers or lubricants may catch fire, causing serious injury.
• Do not turn on a damaged or malfunctioning shredder. Do not disassemble shredders. Do not place the shredder near or over a source of heat or water.
• The shredder is equipped with an ON/OFF switch. (F) which must be set in the ON position (I) for the device to work. In case of danger, turn the switch to the OFF position (ABOUT). This will immediately stop the shredder from working.
• On shredder shredders, avoid touching the cutting blades visible below the head.
• The shredder should be connected to a wall socket or a socket with voltage and amperage to comply with the ratings given on the label.
• The socket must be located near the device and easily accessible. Together with
• Do not use transducers, transformers, or extension cords with this product.
• FIRE HAZARD – DO NOT destroy greeting cards containing arrangements sound or batteries.
• For indoor use only.
• Unplug shredders before cleaning or servicing.

PREPARING THE DEVICE FOR WORK

WHEEL FIXING

BASICS OF OPERATING THE SHREDDER

Continuous operation:

• Maximum 30 minutes
• NOTE: After each cut, the shredder will cut for a short time works until the entry slot is empty.
• Continuous operation lasting more than 30 minutes will result in automatic interruption of the device operation for 50 minutes to allow it to cool down

PAPER, CARD, or CD

• Insert the plug into power sockets and flip the switch power cut off in the ON position (AND)
• Insert the paper straight into the crack on the paper and take it backhand
• Hold the card/ CD by the edge. Insert into the slot input and release
• Set the switch to OFF position ( )

ADVANCED DEVICE FUNCTIONS

SAFESENSE TECHNOLOGY

• It is a security that causes an immediate stop device when the user taps the paper input slot with your hand.

AUTO REVERSE

• Stops and retracts the paper if it is blocked.

SLEEP MODE

• The energy saving function causes automatic shutdown of the device 2 minutes after finishing work

SILENT SHRED

• Thanks to SilentShred™ technology the shredder works without unpleasant noise.

ACTIVATING THE FUNCTION AND CHECKING ITS OPERATION

• Set the switch to the ON position o To activate SafeSense®
• Touch the test area and check if the indicator SafeSense® lights up
• SafeSense® feature is turned on and working correctly

WHEN SLEEP MODE IS ACTIVE

• In sleep mode Load paper

MAINTENANCE OF THE DEVICE

OILING THE SHREDDER

• The felling cutting blades require periodic cleaning and oiling to maintain optimal operating parameters. If they are not oiled, the shredder can accept a smaller number of sheets, work noisily while shredding, and stop working after some time.
• To avoid such problems, you should oil the shredder every time emptying the waste bin.

FOLLOW THE OIL APPLICATION PROCEDURE BELOW AND REPEAT TWICE

• Turn the switch on Off ( ) position
• Apply oil to the area entry slot.
• Turn the switch to the Reverse ( <) position for 2-3 seconds
• NOTE Only use vegetable oil in a long nozzle container (not aerosol), e.g. Fellowes 3525

TROUBLESHOOTING

• Overheat warning light: When this light is on, it means that the shredder has become too hot and needs to cool down. Warning LED informing about overheating, it lights up while the shredder is cooling down.
• The shredder cannot be used in cooling mode. More information about the continuous operation of the device and its duration cooling time is provided in the “Basic shredder operation” section.
• Bin Open: When the bin is open, the shredder does not operate. If this light is on, close the basket to resume operation
• Bin Full: When this LED is on, it means that the shredder bin is full and needs to be emptied. Use Fellowes 36052 shred bags
• Removing Paper: If this light is on, set the switch to the Reverse ( <) position and remove the paper. Reduce the number of sheets of paper accordingly and reload the paper to the slot.
• SafeSense® indicator: The SafeSense® indicator lights up when your hands are too close to the paper slot. At the same time, work is automatically interrupted by shredders.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>