SUSSEX BTRD700 Towel Rail Double Instructions
- June 12, 2024
- SUSSEX
Table of Contents
SUSSEX BTRD700 Towel Rail Double
Product Information
| Product Code | Product Description |
|---|---|
| BTRD700 | Towel rail double 700mm |
| BTRD900 | Towel rail double 900mm |
Product Usage Instructions
- Before installing, ensure the work area is clean and free of any obstacles.
- Carefully unpack the product and identify the parts. Assemble on a non-scratch surface.
- Using the supplied 2mm Allen Key, loosen the Stainless Steel Set Screws within the Extensions and remove the Brass Wall Fixings.
- Combine the Rails with both Extensions and measure to confirm the exact center distance between the Extensions.
- Choose the desired location for mounting and mark-out measured centers. Add 1 or 2 mm to ensure the final fit of the Double Towel Rail.
- Centralize the Brass Wall Fixings onto the marked-out positions and transfer drilling holes.
- Drill 6.5mm holes, fit Tox Plugs, and secure the Brass Wall fixings using the Fastening Screws.
- Fit the Double Towel Rail over the Brass Wall Fixings as a combined assembly (Rails with Extensions).
- Ensure the Extensions are aligned square and tighten the Stainless Steel Set Screws.
- To complete the installation, tension the Rail retaining screws to fix the Rails.
Note : The Brass Wall Fixings must be mounted with the holes in the horizontal direction. Please refer to Fig.2 in the user manual.
Product code
- BTRD700 Towel rail double 700mm
- BTRD900 Towel rail double 900mm
Installation guidelines
- Before installing ensure work area is clean and free of any obstacles.
- Carefully unpack to identify the parts and assemble on a non-scratch surface.
- Using the supplied 2mm Allen Key, loosen the Stainless Steel Set Screws within the Extensions and remove the Brass Wall Fixings.
- Combine the Rails with both Extensions and measure to confirm the exact centre distance between the Extensions.
- Choose the desired location for mounting and mark-out measured centres. Add 1 or 2 mm to ensure final fit of the Double Towel Rail.
- Centralize the Brass Wall Fixings onto the marked-out positions and transfer drilling holes.
Note
- The Brass Wall Fixings must be mounted with the Holes in the Horizontal direction. (see Fig.2)
- Drill 6.5mm holes, fit Tox Plugs and secure the Brass Wall fixings using the Fastening Screws.
- Fit the Double Towel Rail over the Brass Wall Fixings as a combined assembly. (Rails with Extensions)
- Ensure the Extensions are aligned square and tighten the Stainless Steel Set Screws.
- To complete the installation tension the Rail retaining screws to fix the Rails.
Tapware is to be installed by a Licensed Plumber in accordance with AS/NZS
3500:2003
Recommended working water pressure 300-500 kpa. Maximum water temperature is
65 deg.c
Copyright © Sussex Taps.
sussextaps.com.au
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>