SUSSEX BTRH Toilet Roll Holder Installation Guide
- June 9, 2024
- SUSSEX
Table of Contents
SUSSEX BTRH Toilet Roll Holder
Product code
BTRH: Toilet roll holder
Installation guidelines
- The Toilet Roll Holder is supplied pre-assembled within its packaging.
- Using the supplied 2mm Allen Key, loosen the Stainless Steel Set Screws and remove the Brass Wall Fixing from the Extension.
- After choosing the fixing location, use the removed Brass Wall Fixing to mark-out the drilling holes.
WARNING
Note
- The Brass Wall Fixing must be mounted with the Holes in the Horizontal direction. (see Fig.2 )
- Drill the 6.5mm holes, fit Tox Plugs and secure the Brass Wall Fixing using the Fastening Screws.
- Fit the Toilet Roll Holder over the Brass Wall Fixing, aligned square, and tighten the Stainless Steel Set Screws.
- Tapware is to be installed by a Licensed Plumber in accordance with AS/NZS 3500:2003 Recommended working water pressure 300-500 kpa. Maximum water temperature is 65 deg.c Copyright © Sussex Taps.
- sussextaps.com.au
Documents / Resources
|
SUSSEX BTRH Toilet Roll
Holder
[pdf] Installation Guide
BTRH Toilet Roll Holder, BTRH, Toilet Roll Holder, Roll Holder, Holder
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>