SUSSEX Voda Toilet Roll Holder Installation Guide
- June 9, 2024
- SUSSEX
Table of Contents
SUSSEX Voda Toilet Roll Holder
Product code
- VTRH Toilet roll holder
Overview
Installation guidelines
-
This product is supplied pre-assembled within its packaging.
-
Using the supplied 2mm Allen Key, loosen the Stainless Steel Set Screws and remove the Brass Wall Fixings.
-
Choose the desired location, and use the removed Brass Wall Fixing to mark out the drilling holes.
NOTE: The Brass Wall Fixing must be mounted with the holes in the Horizontal direction. (See Fig.2)
-
Drill the 6.5mm holes, fit the Tox Plugs, and secure the Brass Wall Fixing using the Fastening Screws.
-
Fit the Double Robe Hook over the Brass Wall Fixing, aligned square, and tighten the Stainless Steel Set Screws.
Tapware is to be installed by a Licensed Plumber in accordance with AS/NZS 3500:2003. Recommended working water pressure 300-500 kpa. The maximum water temperature is 65 deg.c
Copyright © Sussex Taps.