Intellitronix M9108G LED Digital Oil Temperature Gauge Installation Guide
- June 12, 2024
- Intellitronix
Table of Contents
Intellitronix M9108G LED Digital Oil Temperature Gauge Installation Guide
Thank you for purchasing this instrument from Intellitronix. We value our customers!
Always disconnect the battery before attempting any electrical work on your vehicle.*
KIT COMPONENTS
- Digital Oil Temperature Gauge: Displays 18 – 255° F. range
- Pressure Sending Unit (S8013)
- Mounting equipment
WIRING INSTRUCTIONS
Note: Automotive circuit connectors are the preferred method of connecting wires. However, you may solder if you prefer.
Ground – Black Connect directly to an engine ground such as the engine block. For the most accurate readings, connect to the same ground as the sending unit.
Power – Red Connect to a switched +12V source such as the ignition switch.
Dimmer – Purple Connect to the parking lights to dim the LEDs 50% when the headlights are on. However, do not connect to the headlight rheostat control wire; the dimming feature will not work properly.
Temperature – Blue Connect to the output of the temperature sending unit.
Do not use Teflon tape or other sealer on the new sending unit’s threads to
avoidinaccurate readings.