qtx 154.101UK DMX-D4 4-Way DMX Booster/Distributor User Manual
- June 6, 2024
- qtx
Table of Contents
qtx 154.101UK DMX-D4 4-Way DMX Booster/Distributor User Manual
Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty
Introduction
4 way DMX Booster/distributor with one input, loop through and four electrically opto-isolated outputs. Both DMX input and DMX output are provided with 3 pin XLR connectors, making it universally compatible with most lighting systems. This item is ideally used for splitting the signal over a large area or to isolating individual fixtures making it quick and easy to diagnose and fix faulty fixtures without the whole system failing.
- DMX Loop out or DMX terminated (supplied)
- 4 x Opto isolated DMX outputs (isolated in pairs, CH1&2, CH3&4)
- Powered by mains to boost signal over a long distance.
Layout
- DMX Input
- DMX Loop out
- DMX Output
- IEC Power input
WARNING: BEFORE USE
This item is for professional use only. Please take note of the following instructions before using this device.
- This unit must be earthed.
- Do not turn on the power until all connections are securely made.
- If you are not using the DMX LOOP out socket ensure you use the DMX XLR terminator supplied.
- Always disconnect from the mains before replacing the fuse
- There are no user-serviceable parts inside
Specifications
| Power supply | 230Vac, 50Hz |
|---|---|
| DMX input | 1 x XLRM |
| DMX output | 4 x XLRF (+ loop output) |
| Dimensions | 248 x 165 x 70mm |
| Weight | 1.5kg |
Read User Manual Online (PDF format)
Loading......