Joie P1814A Roomie Glide Instruction Manual

birth to 9kg/0-6 months
roomie™ glide Bedside Crib
Instruction Manual

P1814A Roomie Glide

This bedside crib is approved to EN 1130:2019/AC:2020 and
European safety standards EN 16890:2017+A1:2021
Please read all the instructions in this manual before installing and using the product
!IMPORTANT
RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY.
Welcome to Joie™
Congratulations on becoming part of the Joie family! We are so excited to be part of your life with your little one. While using the Joie roomie™ glide, your baby is enjoying a high quality, fully certified product, approved to European safety standards EN 1130:2019/AC:2020 and
EN 16890:2017+A1:2021. This product is suitable for use with children weighing under 9kg (approximately 0-6 months).Please carefully read this manual and follow each step to ensure a comfortable sleeping and best protection for your child.
Please keep the Instruction Manual handy for future reference.
Visit us at Joiebaby.com to download manuals and see more exciting Joie products.
For warranty information, please visit our website at joiebaby.com
Travel cot Features
Full-functional travel cot, it could be used as bed and placard Ventilate, comfortable meshed rails, make it more convenient for mother to attend baby High-quality, comfortable, dirty-resistant mattress Intimate, flexible bassinet
Steady, safe frame
Easy to carry after folded
Spacious safe room for game
Approve to European safety standards
Comply with European Flammarion standards for high-qualified travel cot
Not include poisonous, such as heavy metal, Bisphenol A, etc.

WARNINGS

! Adult assembly required.
! Do not use this product without reading the instructions for use first.
! Discontinue using product when child reaches 9kg (approximately 0-6 months) or is able to climb out.
! Stop using the product as soon as the child can sit or kneel or pull itself up.
! Do not place additional items (e.g. toys, pillows …) in the product.
! Do not use the product if any part is broken; torn or missing and use only spare parts approved by manufacturer.
! DO NOT USE the product in “Crib Configuration” and/or “Bedside sleeper Configuration” if any part is missing, damaged or broken. Contact joie for spare parts and user instructions if needed. DO NOT substitute parts.
! Consult the user manual for the list of components. Examine the product regularly to make sure that there are no loose, damaged or missing parts.
! Always use all parts needed for each configuration of use.
! Be aware of the risk of burning cigarettes, open fires and other sources of strong heat, such as electric bar fires, gas fires, etc. in the near vicinity of the crib.
! Before assembly, check that the product and all of its components have not been damaged during transportation. Should any part be damaged, keep out of reach of children and do not use.
! Make sure that the adult using the product knows exactly how it works.
! The product is ready for use only when all locking mechanisms are engaged. Make sure they are securely engaged before use.
! The crib should be locked in the fixed position when the child is left unit- tended.
! When the product is being used, and above all in “Crib Configuration”, the wheels must always be locked.
! All operations for opening, adjusting, fastening and installing the product must be carried out by an adult.
! Before using in the “Bedside sleeper Configuration” (fastened to bed), make sure the product is fastened and installed correctly.
! Check the tightness of the attachment system before each use by pulling the bedside sleeper in a direction away from adult bed.
! The fixing straps are included in the packaging. Other fastening systems should not be used.
! To prevent danger of choking due to the child’s head being trapped, when the crib is in the “Bedside sleeper Configuration” (fastened to the bed) it should be properly fastened to the parents’ bed with the fixing straps as explained in the instruction booklet.
! Before placing the child inside the crib when the product is in the “Bedside sleeper Configuration” (fastened to the bed), be sure that the fixing straps are fastened and tightened correctly. The product must be attached to the parents’ bed frame/support and there shall never be a gap between the lower side of the bedside sleeper and the mattress of the adult bed.
! If there are gaps between the lowest part of the Bedside sleeper crib and the parents’ mattress, DO NOT use the product.
! Gaps should not be filled with pillows, blankets or other items.
! DANGER!-Always completely raise the drop side when not attached to the adult’s bed.
! Placing additional items in the product may cause suffocation.
! To avoid hazards from the child’s neck being caught on the top rail on the side that is next to the adult bed, the top rail must not be higher than the adult bed mattress.
! To avoid the risk of your child being strangled the attachment system to the adult’s bed shall always be kept away from and out of the crib.
! A bedside sleeper shall ONLY be used once it has been securely attached to the adult’s bed or when the drop side is in the fully raised position to prevent the child falling from height.
! The product must always be placed on a horizontal surface. Never leave the product on a sloping surface with your child inside.
! Young children should not be allowed to play unsupervised in the vicinity of the crib.
! Do not use the product without the frame.
! Keep the fixing straps out of reach of children.
! Do not use more than one mattress in the cot. Only use the mattress that comes with the product.
! Only use the mattress sold with this crib, do not add a second mattress on this one, suffocation hazards.
! When not attached to the bed, the crib can be inclined by a maximum of 4 positions between one leg support and the other.
! Infants can suffocate on soft bedding. Avoid placing pillows or similar items under newborn babies for additional comfort during sleep.
! Use the crib in the “Bedside sleeper Configuration” (fastened to the bed) only with beds of the size indicated in the reference figure at the beginning of the manual.
! Do not leave anything inside the product that might reduce its depth.
! To prevent the child from being trapped, do not place the crib close to walls or obstacles.
! Do not leave any small objects inside the product that might be swallowed.
! Do not attach any accessories to the product that have not been supplied by the manufacturer.
! Do not make adjustments to the product when the child is in it.
! When in the “Bedside sleeper Configuration” (fastened to the bed), the crib must never be inclined.
! Do not move the product when the child is inside.
! Do not use the product with more than one child at a time.
! Do not place the product close to another product, which could present a danger of suffocation or strangulation, e.g. strings, blind/curtain cords, etc. To avoid strangulation hazards, never give children objects with strings attached, or leave these objects within their reach.
! Prolonged exposure to direct sunlight may cause the product’s colour to fade. After prolonged exposure of the product to high temperatures, wait a few minutes prior to putting your child in it.
! All assembly fittings should always be tightened properly and that care should be taken that no screws are loose, because a child could trap parts of the body or clothing (e.g., strings, necklaces, ribbons for babies´ dummies, etc), which would pose a risk of strangulation.
! Keep the product out of reach of children when it is not in use.
! Be careful when the child is in the crib, that objects or bedding items do not fall into the crib.
! The mattress of the adult´s bed shall be aligned to or above the height of the drop side in the lowest position.
! To prevent a suffocation hazard from entrapment, the bedside sleeper shall be properly secured to the adult bed using the attachment system.

Emergency

In case of emergency or accidents﹐ it is most important to have your child taken care of with first aid and medical treatment immediately.

Product Information

Allison Baby UK Ltd.
Venture Point, Towers Business Park,
Rugeley, Staffordshire, WS15 1UZ
www.joiebaby.com

Read all the instructions in this manual before using this product. If you have any further questions, please call 0800-001-256 / 02-25781188 directly.

Parts List

Make sure all parts are available before assembly. If any part is missing, please contact local distributor. No tools are required for assembly.

1. Height Adjuster Button
2. Height indicator
3. Mattress
4. Support Plastic Assembly
5. Adjuster Button Rail
6. Wheel
7. Feet rotation release button
8. Support Tube
9. Buckle A
10. Buckle B
11. Storage Bag
12. Connecting webbing
13. Buckle C

Bedside Sleeper Assembly

see images Fig. 1 – Fig. 26
Please read all the instructions in this manual before setting up and using this product.
! Please make sure that the adjustable side rail faces in the same direction with adjustable feet.

Rocking Function Activation

see images Fig. 27 – Fig. 28
! Please lock the rocking function during using the unit as bedside sleeper. (Fig. 28)

Height Adjustment

see images Fig. 29 – Fig. 32
! The crib can be adjusted to different height positions.
! The crib can be inclined with a maximum variance of 4 positions between one leg and the other (for example: the right leg in position 5 and the left leg in position 1, see fig. (Fig. 31) & (Fig. 32)).
! It only be applicable to cradle state, but not to bedside sleeper state.
! The head of the child should always be positioned on the highest side.

Use Wheels

see images Fig. 33 – Fig. 34
At this point the crib is ready to be used.
! Do not use the crib with adjustable feet partially or totally rotated and unlocked. The correct position for use is illustrated in figure (Fig. 26). In the case of accidental knocks against adjustable feet, return them to the correct position by lifting the crib slightly.

Use Bedside Sleeper

see images Fig. 35 – Fig. 46

1. Press the button (Fig. 35-1) to drop the side down (Fig. 35-2).

2. Position next to bed (Fig. 36), Connect Buckle to roomie glide (Fig. 38) then loop strap around bed frame and connect to adjuster buckle (Fig. 39), then pull straps tight (Fig. 40).
   ! During fixing the crib to the parent’s bed, If it is not possible to slide the feet of the crib under the parent’s bed, you can rotate the adjustable feet. (Fig. 37)

3. The maximum height difference between the parents’ mattress and the drop side at the lowest position is 2cm (Fig. 41)
   4.The type of adult bed which can be used with bedside sleeper is shown on (Fig. 42, 43, 44), and can not be used with bedside sleeper is shown on (Fig. 45)& (Fig. 46).
   ! Check to make sure that the crib in the bedside sleeper mode does not interfere with the parent’s bed.
   ! During use, make sure that the parents bed sheets, blankets etc. Do not enter and cover the interior of the crib.
   ! In the bedside sleeper mode the 2 legs of the crib should always be adjusted to the same height.
   ! Before every use always check to make sure that there is no space between the parent’s mattress and the side of the crib. If there is, pull the belts firmly to tighten until there’s no space and the permitted condition of use has been restored.
   ! Use of the product is only permitted with beds and/or mattresses with straight sides. Use of the product with round beds and/or mattresses or water beds is not permitted.
   ! When the product is used in the “bedside sleeper mode” (fixing to the bed, it should always be fitted to the long side of access to the bed. Do not fix the product to the head or bottom of the bed.

Use Storage Bag

see images Fig. 47 – Fig. 48
! Refer to Bedside Sleeper Assembly and perform reverse operation to fold the unit, and use the bag for convenient transportation.

|
---|---

Care and Maintenance

see images Fig. 49 – Fig. 51

1. The fabric cover of crib is not removable.
2. Your product can be spot cleaned with a sponge and soapy water.
3. Do not use undiluted neutral detergent, gasoline or other organic solvent to wash the product. It may cause damage to the product.
4. To wash carry bag, machine wash in lukewarm water and drip-dry. Do not use bleach.
5. At the beach or in the garden, clean sand and grit off your product. Sand in the long rail locks may cause damage.
6. From time to time, check your product for worn parts, torn material or stitching. Replace or repair the parts as needed.
7. If the product is not in use for a long period of time, please put it in the shade where your child cannot access it.

Allison Baby UK Ltd.
Venture Point, Towers Business Park,
Rugeley, Staffordshire, WS15 1UZ
bring the kids™
Share the joy at joiebaby.com
IM-000585C

References

• Baby Gear That Goes Above & Beyond | Joie
• 奇哥 online store

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>