V-TAC VT-5138 Led Smart Dome Light Instruction Manual
- June 9, 2024
- V TAC
Table of Contents
LED V-TAC SMART DOME LIGHT
WEEE Number: 80133970
INSTALLATION INSTRUCTION
TECHNICAL DATA
| MODEL | VT-5184 | VT-5138 |
|---|---|---|
| WATTS | 24W | 36W |
| LUMENS | 2400LM | 3600LM |
| BEAM ANGLE | SPHERE 360° | SPHERE 360° |
| CRI | 80 | 80 |
| DF | 0.7 | 0.9 |
| MATERIAL | Plastic(PMMA)+Metal(Iron) | |
| INPUT POWER | AC:220-240V, 50/60Hz | |
| DIMENSION | 0310x55mm | 0350x55mm |
| OPERATION TEMPERATURE | -20°C to +40°C |
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC SMART LED Lighting. V-TAC will serve
you the best.
Please read these instructions carefully before starting the installation and
keep this manual handy for future reference. If you have any other query,
please contact our dealer or local vendor from whom you have purchased the
product. They are trained and ready to serve you at the best.
The warranty is valid for 2 years from the date of purchase. The warranty does
not apply to damage caused by incorrect installation or abnormal wear and
tear. The company gives no warranty against damage to any surface due to
incorrect removal and installation of the product.
The products are suitable for 10-12 Hours Daily operation. Usage of product
for 24 Hours a day would void the warranty. This product is warranted for
manufacturing defects only.
SAFETY WARNING
- Please make sure to turn off the power before starting the installation.
- Installation should only be done by a certified electrician.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- Proper grounding should be ensured throughout the installation.
- Luminaire are limited to indoor use and are not advisable for use in humid environment
- Luminaire is to be used in well ventilated areas and normal installation.
- Do not exert external force or throw on the luminaire.
- Luminaire should be stored in cool/dry place. Always make sure the environment is clean before installing the luminaire .
- Do not discard the luminaire with regular trash. Luminaire are made with electronic components and should be properly disposed at designated locations with unified treatment like traditional electronic equipment.
NOTE:
- This device requires Wi-Fi Frequency 2.4Ghz
- Indoor use only
- Operating frequency (maximum transmitied power) 2400MHz -2483.5MHz (20dBm)
This marking indicates that this product should not be disposed of with other household wastes.
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.
Replaceable (LED only) light source by a professional
Caution, risk of electric shock.
INSTALLATION
- Switch Off the Power Before Starting the Installation (Ref Image No. 1).
- Twist and remove the cover (Ref Image No. 2).
- Drill Hole in the ceiling to fix the light using screws (Ref Image No. 3).
- Connect the wires (Ref Image No. 4) before fixing the light using screws on the ceiling.
- Twist and lock the cover to the light (Ref Image No. 5).
- Tighten the 3×12 screw[included][This step only for 24W] (Ref Image No. 6).
- Switch ON the power and start pairing the light with the App (Ref Image No. 7).
INSTALLATION DIAGRAM
APP INSTALLATION
Step 1: Scan the given QR code, or download “V-TAC Smart Light” from the App Store (iOS) or the Google Play Store (Android).
|
---|---
https://play.google.com/store/apps/details?id=com.vtac.smartlight|
https://itunes.apple.com/cn/app/v-tac-smart-
light/id1406697927?l=en&mt=8
Step 2: Open the V-TAC Smart Light app and tap on register for creating a new
account.| Step 3:
A) Mobile Number: Select the country, then enter your mobile number. Once
done, tap ‘Next’.
B) E-Mail: Enter your email id and tap on ‘Next’.
---|---
| 
Step 4: Enter the verification code which will be sent to your mobile
number/emai id, then assign a new password to your account and tap on
“Confirm”.| Step 5: Tap on ‘Add Device’ or the + sign.
Make sure the luminaire is switched on.
| 
Step 6: Choose ‘Lighting’ to start pairing the luminaire to the app.|
Step 7: To pair the device with luminaire make sure the light is blinks
rapidly.
Once the light blinks rapidly, the luminaire is in pairing mode. If the bulb
is not blinking rapidly, you can do one of the following steps:
A. Switch the smart device on & off repeatedly for 3 times, with short
intervals of less than 2 seconds.
B. Tap the ‘How to make light blink rapidly’ link. (ref image below)
Network Modes:
- EZ Mode: Light flashes twice per second
- AP mode: Slow flash, once every 2 second
Confirm if the light blinks rapidly, select the WiFi network, and enter the password.
Step 8: Once you have successfully completed step 7, you will be redirected to
below page, where the App searches, registers and initializes the device (ref
image below).| Step 9: Once your device is successfully added, rename the
device to your preference.
---|---
|
Step 10: Atier successfully pairing the smart device with the app, you can
start controlling multiple features of the luminaire through your mobile–
on/off switch, changing the colour temperature, timing & schedules, dimming
options, and more.
ALEXA SETTINGS
Step 1:Install the Amazon Alexa app via the App Store(iOS) or the Play Store
(Android) and register. If you already have an existing account with Amazon
Alexa, please proceed to logging in.| Step 2: Once you are on the Amazon Alexa
home page, tap on the lower right icon –– where the arrow is pointed–– to add
a new device and skill.
---|---
|
Step 3: Tap on setings and tap on “skills and games” as shown below.| Step 4:
Search for ‘V-TAC Smart Light’ on the “Skills & Games” page as shown below.
| 
Step 5: Enable the Skill.| Step 6: Enter your V-TAC Smart Light login ID and
password and tap on “Link Now”
|
Step 7: Once you tap on Link Now, you will be redirected to a new page
requesting for
authorization(Ref Image below).
Tap on “Authorize”| Step 8: You will receive confirmation of the account being
linked successfully (Ref Image below)
|
Step 9: Discover your smart device on Alexa. Once you have enabled the skill
A) You can use voice command ”Alexa discover devices” to the Alexa device
which you have.
B) To add device manually on home page tap on and tap on Add device , select
the device which you are adding and tap on discover device.
Note: Discovering the device must be done every time the device’s name is changed on the app.
ALEXA Commands
Now, you can control your smart device using voice commands on Alexa.
Below are a few commands you can use:
! Alexa, turn on/off bedroom light.
! Alexa, set bedroom light to 50 percent.
! Alexa, set bedroom light to green.
! Alexa, set bedroom light to warm white.
THINGS TO REMEMBER BEFORE STARTING INSTALLATION:
- V-TAC Smart Light App & Amazon Alexa App
- Make sure you have Amazon Alexa Device(including Echo, Echo Tap, or Echo Dot)
- Smart Device
- Stable Wifi network
GOOGLE HOME SETTINGS
Step 1:
a&b) Install the Google Home app via the App Store (iOS) or the Play Store
(Android) and register.
If you already have an existing account with Google Home, please proceed to
logging in.
c) Create a New Home/Choose from the existing home if any.
d) Power ON the Google Home device and connect it to the App.(Then Proceed to
step 2)
Step 2: Once you are on the Google home page, tap on the Add “+” icon– to add a new device and skill. And then tap on Set up device as shown in below image.
Step 3: Make sure the Smart Dome Light is paired with V-TAC Smart Light app
before starting step 3. Tap on the arrow section as highlighted in the below
image.| Step 4: Type “V-TAC Smart Light” on the search bar and tap on the icon
of “V-TAC Smart Light”
---|---
|
Step 5: Sign In with your V-TAC Smart Light Login credentials to Link the
Smart Light device| Step 6: Tap on Authorize in order to proceed to linking
the device.
|
Step 7
a. Account will now be linked, please stay on the page you will be redirected
in few seconds to select the device to add to your home.
b. Select the device and tap on Next as show in image b.
Step 8: Select the Home where you would like toadd the Smart Light under. (Or)
you can create a New home in order to add the Smart Light to it.| Step 9: You
have succesfully added Smart Light device to your Google home App.
---|---
| 
Step 10:
a. You can turn the device On/OFF by taping on On/Off options as shown below.
(OR) You can tap on the Smart Light.
b. You will be redirected to page(as shown in image b) where you can control
the lights “Power and Dimming functionality”.
Google Commands:
Now, you can control your smart device using voice commands on Google Home.
Below are a few commands you can use:
! Ok, Google, turn on/off bedroom light
! Ok, Google, set bedroom light to 50 percent.
! Ok, Google, set bedroom light to green.
! Ok, Google, set bedroom light to warm white.
THINGS TO REMEMBER BEFORE STARTING INSTALLATION:
- V-TAC Smart Light App & Google Home App
- Make sure you have Google Home Device
- Smart Device
- Stable Wifi network
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT:
SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>