perle IDS-105FE Industrial Ethernet Switch User Manual
- June 12, 2024
- perle
Table of Contents
IDS-105FE Industrial Ethernet Switch
User Manual
IDS-105FE Industrial Ethernet Switch
5-port Compact DIN Rail Switch
- 5 x RJ45 ports with 10/100 Mbps on all ports
- Redundant dual power input 12/24/48 VDC
- Reverse polarity protection
- Fan-less design with no moving parts
- -10 to 60C industrial operating temperature support
- QoS (Quality of Service) prioritized messages
The Perle IDS-105FE Industrial Ethernet Switch is designed for easy deployment
in industrial environments with harsh operating conditions and limited space.
Designed to stand up to extreme temperatures, surges, vibrations, and shocks
found in industrial automation, infrastructure, transportation, security, oil
and gas, and mining the IDS105FE Switch is an economical easy-to-use device,
that provide essential industrial Ethernet networking functionality.
This unmanaged switches support 9 to 55VDC redundant power input and provide a
relay alarm for power failure. The full/half-duplex auto-negotiation and auto
MDI/MDIX operation simplifies installation and setup for convenient connection
of a variety of network devices. And, QoS support allows for traffic
prioritization and effective management of resources.
For automation and industrial control systems using EtherNet/IP, this rugged,
DIN rail mountable switches with metal housing provides security and easy
installation (mounting kit is included).
Hardware & Technical Specifications
IDS-105FE Industrial Ethernet Switch
Interfaces
RJ45| 5 x RJ45 ports for 10/100Base-TX up to 100 meters (328 ft)
Auto-negotiation
Auto-MDI/MDIX-crossover for use with either crossover over straight-through
cable types
Ethernet isolation 1500 V
---|---
Power|
Power Input| 12/24/48VDC (9-55VDC)
Power Consumption| 1.82W Max. 0.14A@12VDC / 0.07A@24VDC,
0.038A@48VDC
Maximum Current
Consumption @ 24VDC| 0.14A@12VDC / 0.07A@24VDC, 0.038A@48VDC
Power Connector| 3-Pin Removable Terminal Block
Overload Current
Protection| Reset-able fuse provides overload current protection
Reverse Polarity
Protection| The positive and negative inputs can be reversed providing
safe and simple power connectivity.
Switch Properties|
Standards| IEEE 802.3u 100BASE-TX/FX
IEEE802.3x full-duplex flow control
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.1p Quality of Service (QoS)
Processing Type| Store-and-Forward
Auto Negotiation
Half-duplex back-pressure
802.3x full-duplex flow control
Auto MDI/MDIX
MAC Address Table Size| 1K
Packet Buffer Memory| 448 Kbps
Jumbo Frame Size| No
Forward/Filtering Rate| 14,880pps for 10Mbps
148,810pps for 100Mbps
Indicators|
Power LED| This LED is green when power is applied
RJ45 / SFP Ethernet LED| Link/Activity (Green), Speed (Yellow)
Environmental Specifications|
Operating Temperature
Ranges| -10 to 60°C (14 to 140°F)
Storage Temperature
Range| -40 to 85°C (-40 to 185°F)
Operating Humidity
Range| 5% to 90% non-condensing
Storage Humidity Range| 5% to 95% non-condensing
Operating Altitude| Up to 3,048 meters (10,000 feet)
Chassis| Plastic with an IP30 ingress protection rating
Din Rail Mountable| DIN Rail attachment included. Mounts to standard 35 mm DIN
rail in accordance with DIN EN 60175.
Maximum Heat Output| 6.22 BTU/Hr (max.)
MTBF| 10667627 hours
MTBF Calculation model based on MIL-HDBK-217-FN2 @
25°C
Product Weight and Dimensions|
Weight| 0.2Kg / 0.44lbs
Dimensions| 26 x 70 x 110mm / 1.02″ x 2.76″ x 4.33″ (W x D x H)
Packaging|
Shipping Weight| 0.34Kg (0.75lb.)
Shipping Dimensions| 30 x 76.3 x 110mm, 1.18″ x 3.05″ x 4.4″ (W x D x H)
Contents Shipped| Industrial Ethernet Switch with DIN Rail attachment
Terminal block
Installation guide
Standards and Certifications|
Safety| UL 62368
EMC Emissions| FCC Part 15 Class A
VCCI Class A
EN 61000-3-2
EN 61000-3-3
EN 61000-6-4
EMC Immunity| EN 61000-6-2
EN 61000-4-2 (ESD)
EEN 61000-4-3 (Radiated RFI)
EN 61000-4-4 (Burst)
EN 61000-4-5 (Surge: ±4kV line-to-ground)
EN 61000-4-6 (Induced RFI)
EN 61000-4-8 (Magnetic field)
Industrial| IEC 60068-2-6 Fc (Vibration)
IEC 60068-2-27 Ea (Shock)
Environmental| Reach, RoHS and WEEE Compliant
Other| ECCN: 5A991
HTSUS Number: 8517.62.0020
5 year warranty
IDS-105FE Industrial Ethernet Switch
5-Port Industrial Ethernet Switch | IDS-105FE | Perle
Part Number: 07017400
IDS-105FE Industrial Switch with 5 x 10/100Mbps RJ45 Ethernet ports. -10 to
60C operating temperature.
perle.com/products/switches/ids-105fe-5-port-unmanaged-industrial-ethernet- switch.shtml
References
- 5-Port Industrial Ethernet Switches | IDS-105FE | Perle
- Environmental Policy | Fiber & Serial to Ethernet | Perle
- 5-Port Industrial Ethernet Switches | IDS-105FE | Perle
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>