La Perle Pearl 90sm Cooker Hood User Manual
- June 12, 2024
- La Perle
Table of Contents
90sm Cooker Hood User Manual
DEAR CUSTOMERS,
we thank you for the acquisition of our technology. We are convinced that you
have made a proper choice. This product which satisfies high quality demands
and corresponds to world comprehensive standards realizes your cookeries, and
its modern appearance which has been developed by the best European designers
will decorate your kitchen splendidly.
We ask you to thoroughly read the operating instructions before usage.
Following the recommendations protects you from possible inconveniences which
might appear as a result of wrong use of the cooker hood and allows you to
reduce the consumption of electric energy. If the use corresponds to the
present operating instructions, the cooker hood will bring you a lot of
pleasure for a long time.
Our cooker hoods correspond to the main demands of the security, hygiene and
environment protection, according to the directives of the EU which is
confirmed with certificates DIN ISO 9001 and ISO 1400 according to the
standards established within the frames of the EU, they also correspond to the
Gosstandart of Russia, standards of the CIS, which are confirmed with the
corresponding certificates.
Under the main idea of a constant improvement of the quality of our cooker
hoods the rights to modifications in design and equipment which lead to only
positive changes of the technical qualities are reserved by the manufacturer.
We wish you an effective use of our cooker hood. Yours faithfully OLAN-
Haushaltsgeräte Berlin Germany We inform you that our devices which are the
object of the present operating instructions are assigned exclusively for
domestic use.
SAFETY INSTRUCTIONS
This appliance complies with statutory safety requirements. Inappropriate use
can, however, lead to personal injury and damage to property.
Please read this instruction carefully before using the appliance for the
first time, to avoid the risk of accidents and damage of the appliance. The
instruction contains important notes about installation, safety, use and
maintenance of the appliance.The manufacturer cannot be held liable for damage
caused by noncompliance of this instruction. Keep this instruction in a safe
place. Pass it on to any future owner of the appliance.
TERMS OF USE
- Never let the children operate the machine.
- The cooker hood is for home use only, not suitable for barbecue, roast shop and other commercial purpose.
- Clean the cooker hood according to the instruction manual and keep the unit from danger of burning.
- Direct suction from gas cooker is forbidden.
- Please keep the kitchen room a good convection.
- Before connecting this appliance check that the power supply cord is not damaged. A damage supply cord must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels (not applicable to appliances that only discharge the air back into the room).
- Regulations for air discharge have to be fulfilled.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person slide for their safety.
- Children should be supervised to ensure, that they do not play with the appliance.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Cleaning and user maintenance shall not be made by children without supervision.
- Do not flambé under the range hood.
- There is a fire risk if cleaning is not carried out in accordance with the instructions.
Electrical shock hazard
Plug this unit only into a properly earthed outlet. In case of doubt, check
with qualified service personal.
Failure to follow these instructions can result in death, fire, or electrical
shock.
INSTALLATION INSTRUCTIONS
ELECTRICAL CONNECTION
Before connecting to the mains power supply, make sure that the mains
supply has an efficient ground connection complying with all applicable laws
and regulations. Correct grounding is a legal requirement. If the appliance is
not pre-fitted with a power cable and/or plug, use only suitable cables and
plugs capable of handling the power specified on the appliance’s data plate
and capable of resisting heat. The power cable should never reach a
temperature 50 °C above ambient temperature at any point along its length.
If the appliance is to be connected directly to mains terminals, fit a switch
with minimum aperture of 3 mm between the contacts. Make sure that the switch
is of sufficient capacity for the power specified on the appliance’s data
plate, and compliant with applicable regulations. The switch must not break
the yellow-green earth wire. The socket or switch must be easily reachable
with the oven fully installed.
After connecting the device to the power supply network (in accordance with
the requirements defined above) it is necessary to check the lighting of the
hood and whether its motor works correctly.
Attention! Installation and electrical connection must be made by a
qualified expert only.
Attention! The manufacturer declines all responsibility for damage or
injury if the above instructions and normal safety precautions are not
respected.
Installation of the wall hanger
- Trace a vertical line on the wall to indicate the centre of the cooker plate.
- Place the hood body 1 on the wall to get min 650 mm from the cooker plate. Level it horizontally. Use the top of therear side of the hood as ruler to trace the line.
- Hold a hood hanger profile 2 to the wall on the horizontally, symmetrically to the central line, mark the mounting holes on the wall.
- Drill the holes as indicated on the wall, using drills of diameter 8 mm, drive the plugs in and then screw the hanger profile to the wall. The hooks should be upward oriented.
Installation of the hood
- Hang the hood body 1 on the installed hanger 2.
- If the cooker hood will be use in extractor mode it is necessary to mount a vent conduit of Ø 150 mm on the fixed V-flap 3. By connection of a conduit of Ø 120 mm use an adapter 4.
- If the cooker hood will be operate in odour absorber mode it is necessary to install charcoal filter.
- Attach the telescopic column 6 on the masking cover 5 of the mounted hood 1.
- Pull out the masking cover 6 on the demanded height. Mark the level of the mounting holes. Remove the masking cover.
- Place the hanger of the top masking cover 7 at the level of mounting holes and install the hanger.
Hang the masking cover column 6 to the hood’s body and to the wall hanger
using appropriate screws.
BRIEF DESCRIPTION
The cooker hood was designed to remove kitchen fumes. It requires
installation of a conduit discharging used air to the outside. The conduit
(usually a pipe Ø 150) shall not be longer than 4 – 5 m. The hood can operate
as an odour absorber after installation of an charcoal filter. In such case a
conduit discharging used air to the outside is not necessary, but it is
recommended to install an air exhaust guide.
The cooker hood is an electrical appliance manufactured according to class II
of shock protection. It has its own lighting and an exhaust fan which can be
set to one of four rotational speeds. The hood was designed for permanent
installation on a vertical wall over a gas or electric cooker.
LOCATION DRAWING
Arrangement of the functional elements:
- Hood body, equipped with lights, engine unit and electronic programmable control.
- Masking cover of the hood body.
- Wall hanger of the hood body.
- V-flap for the extracting conduit.
- Conduit adapter 150-120 mm
- Top telescopic masking column.
- Wall hanger of the masking column.
OPERATING CONDITIONS
The cooker hood was designed for removal of kitchen fumes to the outside. It
should be connected to an appropriate ventilation duct (do not connect the
hood to any chimney, smoke or flue-gas ducts which are in use).
The device shall be installed at the distance of at least 650 mm above the
working top of an electro and 700 mm above a gas cooker.
Do not leave open flame under the hood. When removing pots from the burners
set the flame to its minimum level.
Any food cooked in fat shall be constantly monitored, since overheated fat can
ignite very easily.
The grease filter of your cooker hood should be cleaned at least every 2
months, because a filter soaked with grease becomes easily flammable. Pull the
plug of the power cord from a wall socket before any cleaning, filter
replacement or repair operation.
The room must be well aerated in case a hood and some other heat equipment fed
with an energy other than electricity (gas, oil, coal heaters, etc) operate at
the same time. In fact the intake hood, disposing of air, could create a
vacuum in the room. The vacuum should not exceed 0,004 millibar. This prevents
the gas exhausted by the heat source from being intaken again. It is therefore
advisable to ensure the room contains air taps able to ensure a steady flow of
fresh air (this point does not apply when the hood is used as an odour
absorber).
When connecting to 220 – 230 V power supply network use an electric socket in
working order.
OPERATION MODES
Air extractor mode of the hood
In the extractor mode air is discharged to the outside by a special conduit.
In that setting any charcoal filters shall be removed.
The hood can be connected to the opening discharging air to the outside by
means of a rigid or flexible conduit of Ø 150 or 120 mm, and appropriate
clamps for conduits which should be purchased in a shop selling installation
materials.
A qualified installer should be commissioned to make the connection.
Setting the odour absorber mode In this option filtered air returns to the
room through cut outs on both sides of the top funnel, In this setting it is
necessary to install the charcoal filter.
Levels of the engine’s speed The lowest and medium speeds should be used under
normal conditions and with low concentration of fumes. The top speed should be
used in case of high concentration of kitchen fumes, e.g. during frying or
grilling.
EQUIPMENT
CONTROL PANEL The switching on of the appliance is
performed by the simple touching of the sensor display.
The operations are steered through selecting of the necessary function on the
display.
The text and the graphic designations, appearing on the display, show the
chosen operation modes.
For more comfort you can use the digital clock timer. It enables you to run
the cooker hood in an automatical, half automatical or manuel cycle.
The device is switched off by briefly touching the ON/OFF sensor button.
The device goes into standby mode and the clock is shown on the display.
If you hold the ON/OFF button for a long time, the cooker hood will turn off
completely and restart.
USAGE
Turn the appliance on by touching the On/Off button. In standby mode, the current time is shown on
the display.
The display will show the Home page, which offers instant access to the main
functions of the extraction system: light, speed and timer.
Touch the symbol on the display to access the desired function and adjust the
parameters.After
selecting the desired parameters, the exhaust system operation starts
automatically, the central panel of the air cleaner will move to the open
position, no additional start button needs to be pressed.
During the operation of the extraction system, all parameters can be changed
at any time by pressing the corresponding function symbol on the display.
LIGHT
The cooker
hood is equipped with a lighting system.
To turn on the lights, press the “Light” symbol on the display. The central
panel of the cooker hood will move to the open position.
Use the slider on the display to adjust the lighting power.
Adjustment of the lighting power is available at any time by simply touching
the “Light“ symbol on the display.
The light function can be switched off any time by pressing the corresponding
symbol on the display.
SPEED To
activate the exhaust system, press the “Speed” symbol on the display.
The central panel of the cooker hood will move to the open position.
Use the slider on the display to adjust the speed of the cooker hood.
The speed adjustment is available at any time by simply touching the “Speed”
symbol on the display.
The speed range has 6 levels, from 0 to 4 and an intensive mode, indicated by
the letter “B”.
If the intensive mode is selected, the cooker hood will operate at the maximum
speed for 2,5 minutes, after which it will automatically switch to the 4th
speed.
The cooker hood is switched off by pressing the speed symbol on the display
again or by setting the speed slider to the zero speed.
DELAY POWER OFF For more comfort the appliance is equipped with an
electronic programming device which allows you to program the automatic
shutdown of the cooker hood after a certain period of time.
To access the timer function, while the cooker hood is running, press the
“Delay power off” symbol on the display.
Using the slider that appears on the display, you can select the time interval
after which the cooker hood will stop operating.
The timer scale has 5 steps, 3, 5, 10, 15 and 30 minutes.
To see the remaining running time of the cooker hood, simply press the timer
symbol on the display at any time.
When the programmed time is reached, the cooker hood will stop and go into
standby mode.
The central panel of the cooker hood will automatically move to the closed
position and the lighting will turn off.
OTHER FUNCTIONS For your comfort, the appliance is equipped with an
electronic programming device that gives you the ability to control operation
in automatic, semi-automatic and manual modes.
Holiday mode
Vacation mode allows you to take care of clean indoor air during your
absence by activating the appliance at the regular intervals and cleaning the
air.
To access the “Other Functions” menu, press the corresponding symbol on the
display.
To activate this mode, press the “Holiday mode” symbol.
From now on and for an unlimited time, your appliance will automatically
switch on every 12 hours and clean the air for 15 minutes at speed 1, after
which it will automatically switch off.
These operating parameters are fixed and cannot be changed.
The Holiday mode is turned off by pressing the corresponding symbol on the
display again.
Ventilation mode
The Ventilation mode allows you to take care of the clean air in your home.
To access the “Special functions” menu, press the corresponding symbol on the
display.
To activate this mode, press the Ventilation mode symbol.
Using the slider appearing now on the display you can select the operating
parameters of the air-cleaning system: the time after which the aircleaner
will stop operating (maximum 30 minutes) and the operating speed.
The Ventilation mode is switched off by pressing the corresponding symbol on
the display again.
LANGUAGE SETTING
- Slide your finger from the top to the bottom of the display to access the menu with additional functions.
- Find the “Settings” symbol and select it by tapping with your fingers.
- Find the “Language” symbol and select it by tapping with your fingers.
- Select the desired language. The default setting is English. The selected setting is marked by a symbol ✔.
- Touch the symbol ✔ to confirm the language setting.
DATE AND TIME SETTING
- Slide your finger from the top to the bottom of the display to access the menu with additional functions.
- Find the “Settings” symbol and select it by tapping with your fingers.
- Find the “Date and Time” symbol and select it by tapping with your fingers.
- First select the desired time system: 12 or 24 hours.
- Then select the current date, which is displayed in the format “DD.MM.YYYY”.
- Then select the current time, which is displayed in the format “HH: MM”.
- The selected parameter is automatically set when removing the fingers from the screen.
SETTING THE STANDBY MODE
- Slide your finger from the top to the bottom of the display to access the menu with additional functions.
- Find the “Settings” symbol and select it by tapping with your finger.
- Find and touch the “Standby time” symbol.
- By moving the slider on the display, set the desired number of minutes after which the device that is not in use automatically enters standby mode.
SETTING UP WI-FI ACCESS
- Slide your finger from the top to the bottom of the display to access the menu with additional functions.
- Find the “Settings” symbol and select it by tapping with your fingers.
- Find the “Wi-Fi” symbol and select it by tapping with your fingers.
- Find the switch for available networks in the upper right corner and move it to the right to activate the search.
- A list of available networks will appear on the screen.
- Select the desired network and enter your password.
- Wi-Fi is used to update the system
BRIGHTNESS
- Slide your finger from the top to the bottom of the display to access the menu with additional functions.
- Find the “Settings” symbol and select it by tapping with your fingers.
- Find the “Brightness” symbol and select it by tapping with your fingers.
- By moving the slider on the display, set the desired brightness.
FACTORY DEFAULT SETTINGS
- Slide your finger from the top to the bottom of the display to access the menu with additional functions.
- Find the “Settings” symbol and select it by tapping with your fingers.
- Find “Reset” in the Settings menu and select it by tapping with your fingers.
- The command bar for deleting saved settings will appear on the screen. Activate it by tapping on the screen.
- The settings will be returned to the factory settings. All previously saved settings will be lost.
ALARM AND TIMER FUNCTIONS
- The alarm and timer functions work independently of all other functions. They can be used even when the appliance is switched off.
- Slide your finger from the top to the bottom of the display to access the menu with additional functions. Select the symbol “Alarm”.
Alarm
- The “Alarm Clock” function allows you to program an alarm to sound at a certain point in time. Select on the display the desired option: today or tomorrow. Then select on the display the desired time, in „HH:MM“ format. ‘
- When the programmed time is reached, an audible signal will sound.
To switch between the “Timer” and “Alarm” functions, press the corresponding symbol on the left side of the screen.
Timer
- The “Timer” function allows you to program an audible signal to sound at a certain time interval. Select the desired time period on the display in HH -MM -CC format.
- When the specified time interval has been reached, an audible signal will sound.
- To return to the Home page, press the arrow in the upper left corner of the screen. It is possible to program up to six positions for Timer or Alarm.
CHILD-PROOF LOCK
This device has a lock function that prevents children from meddling and
accidentally turning on the cooker hood. You can activate this function at any
time.
Activating the child-proof lock
-
Slide your finger from the top to the bottom of the display to access the menu with additional functions.
Select the “Child lock” symbol. -
The panel with the lock symbol appears on the screen. The lock is already enabled.
-
To deactivate the lock, press and hold the Lock symbol on the screen for 5 seconds. Important! You must deactivate the child lock before you can use the appliance again.
CARE AND MAINTENANCE
Regular maintenance and cleaning of the device will guarantee its good and
faultless operation, and extend its life. Attention should be paid to
replacing grease and charcoal filters according to manufacturer’s
instructions.
METAL GREASE FILTER
Grease filters should be cleaned every two months during normal operation
of the hood, in a dishwasher or manually, using mild detergent or liquid soap.
To dismantle the filter 1 proceed as follows:
- Release the lock catch 2.
- Remove the metal grease filter.
CHARCOAL FILTER
**Charcoal filters can be used only when the cooker hood is not connected
to any ventilation duct.
Filters with a charcoal can absorb odours until they are saturated. They
cannot be washed or regenerated and should be replaced at least every 6 months
or more frequently in case of very intensive use.
Replacement of the filter**
- Remove the metal grease filter 1.
- Dismantle the old filter 3 situated on the engine by rotating it counter-clockwise then install a new charcoal filter.
Lighting
The lighting system consists of halogen lamps or LEDs.
Replacement
- Using a flat tool or screwdriver prise the frame of the halogen lamp or LED 1 and holding it, remove to the outside.
- Replace the halogen lamp or LED 2 using a piece of cloth or paper for that purpose.
- Then reinstall the frame and the glass proceeding in reverse order.
Important! Make sure that you do not touch the halogen bulb to be
installed with your bare fingers use for that purpose a piece of cloth or
paper!
Cleaning
The following shall be avoided during normal cleaning of the hood:
- Wet cloth or sponge and water jet.
- Solvents or alcohols which might dull lacquered surfaces.
- Caustic agents, particularly in regard to cleaning stainless steel elements.
- Hard, rough cloth. It is recommended to us moist cloth and neutral cleaning agents.
Alternate inspection
Besides the current maintenance the user is duty-bound to the following
actions:
- Alternate check and maintenance of cooker hood elements and assemblies,
- Let the cooker hood be checked by the customer service after expiration of the warranty once in two years.
- Abolishment of noticed errors,
Note! All installing and maintenance actions mentioned on the top as well
as reparations are to be accomplished by an authorized installer.
Important! The useris responsible for the irreproachable condition and
professional use of the unit. If the customer service is called because of an
operating mistake, the visit is liable to pay costs in the warranty, too.
RESPECT FOR THE ENVIRONMENT
The documentation provided with this oven has been printed on chlorine free
bleached paper or recycled paper to show respect for the environment.
The packaging has also been designed to avoid environmental impact. Packaging
material is ecological and can be re-used or recycled.
By recycling the packaging, you will help save raw materials as well as
reducing the bulk of domestic and industrial waste.
Disposing of the packaging
Please dispose of the packaging that came with your appliance in an
environmentally friendly way. Recycling in this way saves on resources and
cuts down on waste.
Disposing of old appliances
The symbol on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this
product. For more detailed information about recycling of this product, please
contact your local city office, your household waste disposal service or the
shop where you purchased the product.
WARRANTY CONDITIONS FOR HOME APPLIANCES
- The warranty for a broken part is valid for the full period of 24 months from the day of purchase.
- The manufacturer only covers the servicing in the event of a manufacturer fault, such as but not limited to: inappropriate design, installation by technician, defective materials.
- This warranty applies only to products used for the following purposes: non-commercial, personal, family, residential, or household. For anything outside of these purposes, the warranty is only valid for 4 months from the date of purchase of the products.
- Repairs that qualify under this warranty guarantee are completely free including the cost of labour, and materials, transportation is determined by the relevant Kaiser servicing centre.
- Any questions or queries on the quality of the product will be assessed only after our servicing company checks the product. Any conclusions will only be reached based on the outcome of a servicing report.
- The product will only be exchanged within the warranty period in the situation that the servicing expert concludes that the product cannot be repaired or if the same product requires parts changed three times in total within the warranty period.
- In case of unnecessary or unjustified demands for customer service, we charge for our service the usual time consumption and transportation fees. Before , please check whether it‘s a defect or error of a product or you contact our customer service or mistake of maintenance. Please take the time to communicate with the relevant Kaiser service center.
- Installation of the device should only be carried out by qualified professional persons. The customer is required to provide appropriate justification. Otherwise there is no entitlement to the grant of a guarantee.
- Only the distributor selling the products has the right to exchange the defected product for a new one.
- Liability under this warranty is limited to, unless otherwise specified by law is all referred to these above obligations.
WARRANTY NOT VALID WHEN:
- In the event of our products being damaged or experiencing some kind of fault from transport damage, due to incorrect installation by other than trained Kaiser technician or taking improper care of the products, connecting to the wrong power supply, the use of non-recommended cleaning agents and detergents. Any failure to comply with the instructions for operational use or if the product has been repaired or modified or installed by the customer and changed or removed the serial number will not qualify for the warranty conditions.
- Products being serviced by an unauthorized servicing company will not be valid for warranty.
- Product failures caused by reasons independent of the manufacturer, such as fluctuations in the power supply, external events such as nature or natural disasters, fire, insects or domestic and wild animals will not comply with the warranty conditions.
- If the glass or the ceramic glass on a product is broken or defected after installation, the customer will be held liable.
- Any damage scratches, cracks, and external mechanical faults caused during the operation by the customer.
- The damage of certain parts being caused by normal wear and tear such as (lamps, filters, etc.).
- Other external factors causing damage such as adjusting the products and cleaning.
- Any other damage caused by the fault of the user and which is not linked to faults caused by the manufacturer will not comply with the warranty agreement.
The unearthed devices are potentially dangerous.
The manufacturer accepts no liability for damages which have caused by
improper use, the incorrect installation, operation, application or
maintenance.
PURCHASE MARK
Electric cooker——————-
Fridge————
Gas cooker—————
Washing machine————
Built-in hob————
Dishwasher———–
Built-in oven————–
Cooker hood————–
Microwave————-
Coffee machine—————
model —————————————
Serial number—————————
Dealer —————-
Phone—————–
Date of purchase——————
INFORMATION ABOUT INSTALLATION
Installed…………………………………………………………………………………………..
Purchaser (name, surname)……………………………………..
Address, phone…………………………………..
Purchaser’s signature ………………….
Expert (name, surname)………………………..
Installer………………………………..
Installer’s signature…………………………………..
The product(s) is sold in their original packaging or tested in my presence.
Operating Instructions are supplied and explained.
I am satisfied with the appearance and internal features of the product(s).
EG Declaration of Conformity
Manufacturer:
OLAN-Haushaltsgeräte e.K.
Address: Eichborndamm 277 13437 Berlin Germany
Hiermit wird bestätigt, dass alle Abzugshauben This is to confirm that all
cooker hoods
Marke / Brand :
Typ/ Type:
AT 93…*…model number
colour comply with the regulations of the European Directives.
The conformity of the designated product with:
- The regulations of the European Directives 2014/35/EU: LVD (Low Voltage Directive) and CE 2014/30/EU: EMC (Electromagnetic Compatibility);
- Commission Regulation (EU) No 65/2014 of 1. October 2013 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to the energy labelling of domestic ovens and range hoods;
- Commission Regulation (EU) No 66/2014 of 14. January 2014 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for domestic ovens, hobs and range hoods is demonstrated by full compliance with the following European standards:
EN 60335-1:2012+A11:2014+C11:2014+A13:2017+A1:2019+A14:2019+A2:2019+A15:2021
EN 60335-2-31:2014
EN 62233:2008
EN/IEC 55014-1:2021
EN/IEC 55014-2:2021
EN/IEC 61000-3-2:2019+A1:2021
EN 61000-3-3:2013+A1:2019
Berlin, 24.03.2022
A. Stieben
Abteilungsleiter/ Department Manager
WARRANTY CARD
(Nr. indicates the number of the unit, see the back cover of this manual)
This warranty does not limit statutory rights of consumers
Congratulations on the purchase of household appliances of excellent
quality!
Please refer to the warranty card and make sure it has been properly filled in
and had a shop stamp. In the absence of the stamp and the date of purchase,
warranty period commences from the date of manufacturing of the product.
Carefully check the appearance of the product, all claims about the product
appearance must be notified to the seller at the time of purchasing. Keep the
warranty certificate and the receipt. In the event of the product components
incomplete/ missing and or requirement for their replacement, please contact
your dealer. For the installation, connection and all matters relating to the
maintenance, contact authorized service centres. Details of authorized service
and repair service centres are attached in a separate list. We reserve the
right to make changes in design or manufacturing technology. Those changes do
not entail obligation to update or improve the previously released products.
Reduction of environmental impact
Information on reducing the environmental impact from cooking and non-
destructive disassembly.
The following calculation and measurement methods were used to determine the
results and in accordance with the requirements for labeling in terms of
energy consumption and in terms of ecodesign requirements: Directives of the
European Parliament and of the Council –
Regulation (EU) No. 65/2014 and No. 66/2014.
EN 50564:2011 – Electrical and electronic household and office equipment –
Measurement of low power consumption.
Information on reducing the environmental impact (e.g. energy consumption)
from cooking in accordance with Annex I, No. 2 of Regulation (EU) No. 66/2014
with a regard to setting ecodesign requirements for household ovens, hobs and
cooker hoods.
- Use baking pans and trays with dark and matte surfaces, because they conduct heat better
- Open the oven door during cooking only when necessary
- Preheat the cooking chamber only when necessary according to the recipe
- Always select the lowest recommended temperature for cooking temperatures
- Switch the oven to minimum temperature shortly before the end of the cooking time to use the residual heat
- To ensure energy efficiency, switch all buttons (temperature, interior light and program) to “0/Off” when the oven is not in use
- Remove any soiling immediately, otherwise the cleaning effort may increase
- Use biological cleaners to clean the oven
Information for professional users for dismantling according to Annex I, No. 2 of Regulation (EU) No. 66/2014
Information on non-destructive disassembly for maintenance purposes
- Disassembly for maintenance purposes can only be performed for the oven door (see chapter “Disassembling the oven door” p.71).
- Disassembly for maintenance purposes is not foreseen.
- For repair and replacement of defective parts, please contact the customer service.
- Accumulators are not included.
Disassembly information related to recycling, recovery and disposal at the end of the life of the device.
- Dismantling of devices with gas connection may only be carried out by a licensed gas and water installer.
- Dismantling of devices with electrical connection should be performed by a licensed electrician.
For recycling and resource recovery, specify the device:
- municipal collection point run by the public waste disposal authorities
- manufacturer’s own waste disposal company that offers a take-back system
- local electrical retailer who voluntarily takes back electrical equipment.
For information on the energy efficiency index for each oven compartment, the dimensions of the appliance, the number of oven compartments, the heat source per oven compartment and the volume per oven compartment please refer to the data sheet, attached to the user manual.
The manufacturer declines all responsibility for possible mistakes and typing errors and reserves the right to make in design and construction of our own products those changes which do not touch negative influence upon the qualities and properties without a preliminary notification.
OLAN-Haushaltsgeräte • Berlin •
Germany
www.kaiser-olan.de
Documents / Resources
| La
Perle Pearl 90sm Cooker
Hood
[pdf] User Manual
Pearl 90sm Cooker Hood, Pearl 90sm, Cooker Hood, Hood
---|---
References
- Europa.com is For Sale | BrandBucket
- Бытовая техника Kaiser - Официальное представительство, интернет-магазин
- ELESCO EUROPA GmbH – Reparatur – Service – Installation – Wartung – Ersatzteile
- ESECO GmbH | Das Netzwerk für maßgeschneiderte Servicelösungen in Österreich
- Kaiser offizielle Webseite – Kaiser offizielle Webseite
- SFG | Société française de garantie
- Universal Service Provider