make it real 2562 Color Fusion Swirling Lip Gloss Maker Instructions

make it real 2562 Color Fusion Swirling Lip Gloss Maker

Product Information

Specifications:

• Name: Swirling Lip Gloss Maker
• Model Number : 2562-INSINT-01-V3
• Effect : Swirl Effect

Product Usage Instructions

Work Surface Protection:

Make sure to properly protect the work surface before setting up the lip gloss maker.

Foam Pad Attachment:

Stick each foam pad onto the bottom of the lip gloss maker as shown in the instructions provided.

Crank Installation:

Snap the crank into the lip gloss maker without turning it at this stage.

Left Plunger Unlocking:

Unlock the left plunger by turning it counterclockwise until the wing is pointing towards you.

Right Plunger Locking:

Repeat the unlocking process with the right plunger, turning it in the opposite direction as the left plunger.

Tube Attachment:

Pick a tube and screw it onto the lip gloss maker securely.

Cartridge Preparation:

Select a colour combination from the chart and pick the first lip
gloss cartridge required for the recipe. Turn and release both top
and bottom caps, keeping them nearby.

Cartridge Insertion:

Using the holding tab, insert the lip gloss cartridge into the left side of the lip gloss maker.

(FAQ)

• Q: What should I do if the crank does not snap into place?
• A: Ensure that you are aligning the crank correctly with the lip gloss maker before snapping it in. Do not force it into place.
• Q: Can I use any type of tube with the lip gloss maker?
• A: It is recommended to use tubes specifically designed for use with the lip gloss maker to ensure proper functionality and compatibility.

SETTING UP THE LIP GLOSS MAKER

1. Make sure to properly protect the work surface before setup.
2. Stick each foam pad onto the bottom of the lip gloss maker as shown.
3. Snap the crank into the lip gloss maker. DO NOT TRY TO TURN IT.
4. Unlock the left plunger by turning it counterclockwise until the wing is pointing toward you
5. Pull the plunger up until it stops and rotate it clockwise to lock it in the upper position.
6. Repeat steps 4 to 5 with the right plunger, turning it in the opposite directions.

FILLING A LIP GLOSS TUBE

1. Pick a tube and screw it onto the lip gloss maker. Prends un tube et visse-le

2. Open both doors of the lip gloss maker to reveal the inside.

3. Select a color combination from the chart. Pick the first lip gloss cartridge required for the recipe. Turn and release the top and bottom caps. Keep both caps nearby

4. Using the holding tab, insert the lip gloss cartridge into the left side of the lip gloss maker

5. The lip gloss cartridge should be in the upright position and the tab should rest in the inner groove
   If not positioned correctly, lift the lip gloss cartridge with the tab and reposition it until it’s fully upright.

6. Pick the second lip gloss cartridge for the recipe and repeat steps 3 to 5

7. Unlock the left plunger and lower it until you feel it touching the lip gloss cartridge inside. Do not apply any pressure.

8. Rotate the plunger clockwise until a small amount of lip gloss is poured into the tube
   If no lip gloss comes out, apply a bit more pressure down on the plunger. Relock it afterwards.

9. Repeat steps 7 to 8 with the right plunger.

10. Close both doors of the lip gloss maker
    Each lip gloss cartridge can be used 4 times! The height of the plungers will vary depending on how many times the lip gloss cartridge has been used before

11. Holding the lip gloss maker with your left hand, VERY SLOWLY turn the crank COUNTERCLOCKWISE with your right hand. A lip gloss swirl will be created

12. When the tube is almost full, the crank will stop turning. DO NOT FORCE IT and wait 5 seconds for the pressure to be released.

13. nscrew the tube from the lip gloss maker.

14. Insert an applicator scraper into the tube

15. Screw on an applicator wand. Your lip gloss is now ready to use!

RESETTING THE LIP GLOSS MAKER FOR THE NEXT USE

1. Rotate the crank clockwise until the lip gloss maker is at its lowest position and stops. DO NOT FORCE IT.
2. Unlock both plungers and lift them up. Lock them back in the upper position (refer to steps 1 to 3 of the Setup section
3. Open both doors of the lip gloss maker and gently remove both lip gloss cartridges
4. Clean the nozzles of the lip gloss cartridges using a tissue. Push and turn both the top and bottom caps back onto each cartridge.
5. The lip gloss maker is now ready to fill another lip gloss tube

USING THE CARRYING CASE

1. Choose the lip gloss tube that you want to carry with you and insert the tube into the crystal case
2. Insert the top of the wand applicator into the carry-case cap firmly.
3. You can now turn the carry case cap to open the crystal case and apply lip gloss to your lips!

COLOR AND SCENT COMBINATIONS

WARNING!

CHOKING HAZARD – small parts. Not suitable for children under 3 years. Please retain the instructions since they contain important information. Do not eat or drink. In case of contact with eyes, rinse immediately with plenty of water. In case of allergic reaction, stop using immediately, and seek medical advice. This product may stain certain fabrics and surfaces. Keep away from clothing and protect your work surface

contact

• 1700 Reisterstown Rd Ste 211, Pikesville, MD 21208
• USA 410-995-8685
• Justin House, 24 Hood Street, Ancoats, Manchester, M4 6WX
• makeitrealplay.com
• UK +44 (0) 161 302 4100

References

• Make It Real

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>