Labpano Pilot Pano 5.7K 360 Camera User Guide

Labpano Pilot Pano 5.7K 360 Camera

Labpano Pilot Pano Panoramic Camera Overview

Outline

1. Lens*2 8
2. Microphone*4
3. Indicator
4. 3.0 Touch screen
5. SD card slot cover
6. Card slot
7. Power button
8. Speaker
9. Battery cover release button
10. Standard 1/4 mounting point
11. USB Type-C port
12. 3.5mm mic jack
13. Hang string mouth

Before You Start

1. Insert the battery and charge the battery fully before using this unit for the first time.
2. Please use the included charge cable to charge the camera

3. Insert SD card
4. Open the SD card cover.
5. Insert the SD card into the card slot.（Faced the labbled side in the direction of the scree and press it straight in as far as it will go）
   Note:

  * Pilot Pano with 15GB of internal storage plus support for a microSD card.  

Recommend TF card in exFAT format. When using the SD card for the first time, it is necessary to format the SD card.

3. Securely close the SD card slot cover, otherwise, it may result in water and sand entering the inside of the camera.

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Power on/Power off

1. When Pilot Pano is powered off, press and hold the power button for 3s to power on.
2. When Pilot Pano is powered on, press the power button fo 1s to set the screen on or screen off.
3. When Pilot Pano is powered on，press and hold the powe button for 3s, select power off to turn off the camera.

Features（Interface）

Specifications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>