INMOTION M Series RX HML Receiver Instruction Manual
- June 15, 2024
- INMOTION
Table of Contents
INMOTION M Series RX HML Receiver
Receiver
WARNING! The receiver must NOT be opened by any other that a qualified
installer. Make sure to turn the electricity off before opening the receiver.
The receiver is intended for wireless control of cranes, hoists, monorails and
other types of equipment. The receivers operate in two to five step for
typical Hoist, Trolley and Bridge Control.
Technical Data
| Frequency | 902.5 – 927.5 MHz |
|---|---|
| Modulation Method | 2GFSK |
| Control System | PLL |
| Input Power (AC) | 90 ~ 240V, 50/60 Hz |
| Input Power (DC) | 12 VDC |
| Average Power Consumption | AC: 9.7W, DC: 7.2W |
| Operating Temperature | -40F to +149F |
| Protection Degree | IP65 |
| Housing Material | PA6 (30% Glass Filled) |
| Overall Dimension | 10.71” × 10.23” × 3.78” |
| Weight | 5.18 Lbs. |
Antenna Position
Mount Enclosure in the orientation shown above. Do not mount upside down. The Receiver Enclosure should be mounted in an area clear of large metal objects, away from crane electrification, and with ideally unobstructed line-of-sight to the operator’s area.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>