Maisto 82734 2.4Ghz RC City Bus User Guide

: June 12, 2024
: Maisto

Table of Contents

2.4Ghz RC City Bus
- 82734_618034
Documents / Resources
Read User Manual Online (PDF format)
Download This Manual (PDF format)

2.4Ghz RC City Bus

82734_618034

Age 5+

Maisto – Radio Control Vehicles

WARNING! Not suitable for children under the age of 36 months due to danger of swallowing small parts. Choking hazard!
Please keep this owner’s instruction manual for future reference. It contains important information. We reserve the right to improve/revise the product specifications without notice.

Class 1 LED Product

Contents:
RC Vehicle x 1
Transmitter x 1
Owner’s Instruction Manual x 1

Battery requirement:
RC Vehicle: 4 x 1.5V”AA”LR6/R6 batteries.
Transmitter: 2 x 1.5V”AAA”LR3/R3 batteries.

Battery installation for the Transmitter: (Refer to Diagram 1)

1. Battery installation
2. 2 x 1.5V “AAA” LR03/R03 batteries
3. Cover
4. Screw

Use screwdriver to loosen the screw on the battery cover and to open the battery cover. (Screwdriver is not included)
Install 2 new 1.5V “AAA” LR03/R03 batteries with correct polarity (+/.) as shown inside the battery compartment.
Install the battery cover and then lighten the screw on the battery cover.

Battery installation for the Vehicle: (Refer to Diagram 2)

1. Power Switch
2. Cover
3. Screw
4. 4 X 1.5V “AA” LR6/R6 Batteries

Set the “power switch” on the vehicle to OFF position.
Use screwdriver to loosen the screw on the battery cover and to open the battery cover. (Screwdriver is not included)
Install 4 pieces new 1.SV “AA” LR6/R6 batteries into the battery compartment with correct polarities ( +/-) as shown inside the battery compartment.
Install the battery cover and then lighten the screw on the battery cover.

How to play: (Refer to Diagram 3, 4, 5, 6 & 7 )

3.

1. Power Switch
2. Left
3. Right
4. Backward
5. Stop
6. Forward

5.

1. Turning lights

1. Press
2. Open/close door

7.

1. Wheel Alignment

Set the “Power Switch” on the controller and vehicle to ON position, the “Power LED” on the controller will flash less than 3 seconds then stay on, meaning the automatic frequency matching between the controller and the vehicle is completed.
If the “Power LED” of the controller flash more than 3 seconds, switch off both the vehicle and controller, then turn them on again.
Pull the trigger switch in the transmitter to drive the vehicle forward. Push the trigger switch in the transmitter to drive the vehicle backward.
Turn the steering knob in the transmitter to steer the vehicle to right or left. When the vehicle turn to right, the right turning light will be turned on. When the vehicle turn to left, the left turning light will be turned on.
Press the top button to control the door open and close.
If the vehicle does not run in a straight line, adjust the wheel alignment under the chassis.
Turn the switch of the vehicle and the transmitter to OFF position when not in play.

Performance tips:

Do not drive the vehicle on grass or sand or through water.
Do not drive the vehicle in windy or rainy weather.
Do not drive the vehicle into any hard object.
Keep fingers, hair and loose clothing away from the vehicle.
The operating range can be affected by a variety of factors:
a) Weak transmitter or vehicle batteries.
b) Interference from other items that emit radio frequency signals such as another R/C item on the same frequency, CB radios, cordless phones, high voltage transmitter, etc.
Outdoor usage is recommended in order to get an optimal control range.

Battery use:

Alkaline batteries are recommended.
Only batteries of the same or equivalent type as recommended are to be used.
Do not mix alkaline, standard or rechargeable batteries.
Do not mix old and new batteries or different types of batteries.
Non-rechargeable batteries are not to be charged.
If rechargeable batteries are to be used, they are only to be charged by an adult.
Rechargeable batteries are to be removed from the product before they are charged.
Be sure to insert batteries with correct polarities and always follow the battery manufacturer’s instructions.
Remove all batteries from the product when not in use for long periods of time.
Exhausted batteries are to be removed from the product.
The supply terminals are not to be short-circuited.
Dispose of batteries properly. Do not dispose of batteries in fire – it may cause them to explode or leak, causing injury or damage.
Battery change must only be made by adults.

Cautions

Do not attempt to disassemble the products.
Do not operate the vehicle with the same frequency as other players in same location. This will interfere and cause the vehicle to lose control.
Make sure the batteries are installed with correct polarity (+/-) as shown inside the battery compartment.

Environmental notes:

The whole product does not belong to household waste at the end of the product life.
You can return it to collection points for the recycling of electronic and electrical instruments.
The symbol on the item instruction manual, hangtag or packing shows this clearly.
Materials should be recycled according to their respective markings.
Recycling of old devices or other re-use of materials contained therein represents an important contribution to environmental protection.
Please ask your local community for the correct collection point.
Please retain this sheet and address for future use, as they contain important information.

Disposal of batteries

Batteries should not be disposed of in the household waste. As the consumer, you are legally obliged to return batteries containing harmful substances and all other used batteries.
You can hand in your old batteries at public collection points in your area or wherever batteries are sold.
You will find these chemical abbreviations along with a crossed-out refuse bin on batteries containing harmful substances: Pb = Battery contains lead, Cd = Battery contains cadmium, Hg = Battery contains mercury

CE Declaration

Hereby, May Cheong Group declares that the radio equipment type 82734 is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address:
http://www.maycheonggroup.com.hk/web/declaration-of-conformity/.

Frequency: 2.4 GHz
Transmitting frequency band: 2.4-2.4835 GHz
Max allowed transmitting power: <10 mW

Troubleshooting:

Problem	Cause	Correction
No function	Low battery level

Battery polarities are reversed
Channel settings do not match
The wheels are obstructed by foreign objects | Replace with new batteries
Insert the batteries with correct polarities as shown on the battery compartment
Match the transmitter with the vehicle channel (channel A to A, B to B, C to C)
Remove foreign objects on the vehicle/wheels
Drive slow / Poor turning signal| Low battery level
The wheels are obstructed by foreign objects| Replace with new batteries
Remove foreign objects on the vehicle/wheels
Poor distance control | Low battery level
Strong interference of surroundings | Replace with new batteries
Move to a better location for playing

www.maisto.com

Importer: Tammer Brands Oy,
Viinikankatu 36, 33800 Tampere, Finland

MADE IN CHINA

Documents / Resources

| Maisto 82734 2.4Ghz RC City Bus [pdf] User Guide
618034_RC_Linja-auto_ko_EN-FI-SV, 82734, 82734 2.4Ghz RC City Bus, 2.4Ghz RC City Bus, RC City Bus, City Bus
---|---