FRIEDRICH Kuhl Q Wallmaster Connect User Guide
- June 12, 2024
- FRIEDRICH
Table of Contents
**FRIEDRICH Kuhl Q Wallmaster Connect User Guide
**
Let’s Get Started!
-
Check for a 2.4 Ghz connection and make sure the device is connected tothat network.
-
Download the Friedrich Connect App on your smartphone.
-
Sign into the app or create a account.
-
Verify the profile, check and confirm that the TIME ZONE is populated correctly.
-
Enter the Friedrich connect app and press “+ add”. The app will automatically show the next screen. Prepare your device by following steps one and two in the app. After your unit is in connect mode please press the Wifi Discovery button in the app.
NOTE: I Phone users will need to turn on and allow location services for the Friedrich Connect App. -
Go to the unit and press the MENU button and with the arrows go to CNCT and press MENU again.
NOTE: When the setup process starts, the WI-FI symbol will begin to flash. This indicates the A/C unit is broadcasting its WiFi SSID.
NOTE: Once the setup process has been started, you will have five minutes to complete the setup. If the setup cannot be completed in five minutes then you will need to restart the process.
-
After pressing WifiDiscovery, you will see the Connect to Friedrich Device instructions, tap on “open wifi settings” and the app will navigate you to your phones wifi settings. From your Wifi settings please connect to the “Friedrich_XXXX” network and to allow local permissions if asked by the mobile device. You may then press the back button and return to our app where you can now tap on “Connect Device” that was previously greyed out.
-
After pressing “Connect Device” you will be taken to the Configure Friedrich Device screen. On this screen we only need to select your local 2.4WiFi network in the app with step 1. Step 2 is not something that is normally needed and you can proceed to step 3 of entering your 2.4 Wi-Fi password and then press “Associate Device”.
-
The next window will show connected success. Just press OK, and you will see the new unit in devices with the serial number of the device as its name that can be changed in the units Info Tab.
NOTE: Your Home Screen Wi-Fi symbol will stop flashing and will show steady.
NOTE: A GREEN symbol will appear under the “Status” details and the name of your Friedrich unit which will appear with a number. for example: (62601032R01184660025)
- Last step when you see the serial number under “MY DEVICES” you can select the unit and verify if is working, press MODE to change the temperature
NOTE: Sometimes it takes a few seconds for the command to register on the unit.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>