DEWALT D25032 SDS Plus Comb Hammer Instruction Manual

SDS Plus Comb Hammer
Instruction Manual

HEAVY-DUTY ROTARY HAMMERDRILL
D25032, D25033, D25133, D25134, D25143, D25144, D25263
www.DEWALT.com

D25032 SDS Plus Comb Hammer

Congratulations!
You have chosen a DeWALT tool. Years of experience, thorough product development and innovation make DeWALT one of the most reliable partners for professional power tool users.

Technical Data

230/115
Type|  | 1/10| 1/10| 1/10| 1/10| 1| 1/10| 1
Frequency| Hz| 50| 50| 50| 50| 50| 50| 50
Power input| W| 710| 710| 800| 800| 900| 900| 900
No-load speed| min–1| 0–1550| 0–1550| 0–1500| 0–1500| 0–1450| 0–1450| 0–1450
No-load beats per min| bpm| 0–5680| 0–5680| 0–5500| 0–5540| 0–5350| 0–5350| 0–5350
Single impact energy (EPTA 05/2009)|  | 2.0| 2.0| 2.6| 2.8| 3.0| 3.0| 3.0
Maximum drilling range in steel/wood/concrete| mm| 13/30/22| 13/30/22| 13/30/26| 13/30/26| 13/30/28| 13/30/28| 13/30/28
Chisel positions|  | —| 44| 44| 48| 48| 48| 48
Core drilling capacity in soft brick| mm| 50| 50| 50| 65| 65| 65| 65
Tool holder|  | SDS Plus| SDS Plus| SDS Plus| SDS Plus| SDS Plus| SDS Plus| SDS Plus
Collar diameter| mm| 43| 43| 43| 54| 54| 54| 54
Weight| kg| 2.5| 2.5| 2.6| 3.0| 3.1| 3.1| 3.1

Noise values and vibration values (triax vector sum) according to EN60745-2-6:

<2.5
Uncertainty K =| m/s2| 1.5| 1.5| 1.5| 1.5| 1.5| 1.5| 1.5
Drilling into concrete|  |  |  |  |  |
Vibration emission value ah,HD =| m/s2| 13.6| 13.6| 15.4| 15.7| 14.9| 14.9| 9.8
Uncertainty K =| m/s2| 1.5| 1.5| 1.5| 1.5| 1.5| 1.5| 1.5
Chiselling|  |  |  |  |  |
Vibration emission value ah,Cheq =| m/s2| —| 12.5| 14.9| 14.3| 13.8| 13.8| 8.1
Uncertainty K =| m/s2| —| 1.5| 1.5| 1.5| 1.5| 1.5| 1.5
Screwdriving without impact|  |  |  |  |  |
Vibration emission value ah =| m/s2| <2.5| <2.5| <2.5| <2.5| <2.5| <2.5| <2.5
Uncertainty K =| m/s2| 1.5| 1.5| 1.5| 1.5| 1.5| 1.5| 1.5

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched  off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.

EC-Declaration of Conformity
Machinery Directive

Heavy-Duty Rotary Hammerdrill
D25032, D25033, D25133, D25134, D25143, D25144, D25263

DeWALT declares that these products described under Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-6:2010.
These products also comply with Directive 2014/30/EU and 2011/65/EU. For more information, please contact DeWALT at the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and makes this declaration on behalf of DeWALT.

Markus Rompel
Director Engineering
DeWALT, Richard-Klinger-Straße 11,
D-65510, Idstein, Germany
27.03.2017

WARNING: To reduce the risk of injury, read the instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.

General Power Tool Safety Warnings
WARNING : Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool.

1. Work area safety
   a ) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
   b ) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
   c ) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2. Electrical safety
   a ) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
   b ) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
   c ) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
   d ) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
   e ) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
   f ) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3. Personal safety
   a ) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
   b ) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
   c ) Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
   d ) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
   e ) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
   f ) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
   g ) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4. Power tool use and care
   a ) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
   b ) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
   c ) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
   d ) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
   e ) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
   f ) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
   g ) Use the power tool, accessories and tool bits etc., in accordance with these instructions taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5. Service
   a ) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Additional Specific Safety Rules for Rotary Hammers

• Wear ear protectors. Exposure to noise can cause hearing loss.
• Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.
• Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
• Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.
• Wear safety goggles or other eye protection. Hammering operations cause chips to fly. Flying particles can cause permanent eye damage. Wear a dust mask or respirator for applications that generate dust. Ear protection may be required for most  applications.
• Keep a firm grip on the tool at all times. Do not attempt to operate this tool without holding it with both hands. It is recommended that the side handle be used at all times. Operating this tool with one hand will result in loss of control. Breaking through or encountering hard materials such as re-bar may be hazardous as well. Tighten the side handle securely before use.
• Do not operate this tool for long periods of time. Vibration caused by hammer action may be harmful to your hands and arms. Use gloves to provide extra cushion and limit exposure by taking frequent rest periods.
• Do not recondition bits yourself. Chisel reconditioning should be done by an authorized specialist. Improperly reconditioned chisels could cause injury.
• Wear gloves when operating tool or changing bits. Accessible metal parts on the tool and bits may get extremely hot during operation. Small bits of broken material may damage bare hands.
• Never lay the tool down until the bit has come to a complete stop. Moving bits could cause injury.
• Do not strike jammed bits with a hammer to dislodge them. Fragments of metal or material chips could dislodge and cause injury.
• Slightly worn chisels can be resharpened by grinding.
• Keep the power cord away from the rotating bit. Do not wrap the cord around any part of your body. An electric cord wrapped around a spinning bit may cause personal injury and loss of control.

WARNING: We recommend the use of a residual current device with a residual current rating of 30mA or less.

Residual Risks
In spite of the application of the relevant safety regulations and the implementation of safety devices, certain residual risks cannot be avoided. These are:

• Impairment of hearing.
• Risk of personal injury due to flying particles.
• Risk of burns due to accessories becoming hot during operation.
• Risk of personal injury due to prolonged use.

Electrical Safety
The electric motor has been designed for one voltage only. Always check that the power supply corresponds to the voltage on the rating plate.
Your DeWALT tool is double insulated in accordance with EN60745; therefore no earth wire is required.
WARNING: 115 V units have to be operated via a fail-safe isolating transformer with an earth screen between the primary and secondary winding.
If the supply cord is damaged, it must be replaced by a specially prepared cord available through the DeWALT service organisation.

Mains Plug Replacement (U.K. & Ireland Only)
If a new mains plug needs to be fitted:

• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.

Using an Extension Cable
An extension cord should not be used unless absolutely necessary. Use an approved extension cable suitable for the power input of your charger (see Technical Data). The minimum conductor size is 1.5 mm2; the maximum length is 30 m.
When using a cable reel, always unwind the cable completely.

Package Contents
The package contains:
1 Heavy-duty rotary hammer drill
1 Side handle
1 Depth adjustment rod
1 Keyless chuck (D25134, D25144)
1 Instruction manual

• Check for damage to the tool, parts or accessories which may have occurred during transport.
• Take the time to thoroughly read and understand this manual prior to operation.

Markings on Tool
The following pictograms are shown on the tool:

| Read instruction manual before use.
---|---
| Wear ear protection.
| Wear eye protection.

Date Code Position (Fig. A)
The date code  12 , which also includes the year of manufacture, is printed into the housing.
Example: 2017 XX XX Year of Manufacture

Description (Fig. A, E, H)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.

1. Variable speed switch
2. Main handle
3. Forward/Reverse lever
4. Mode selector
5. Mode selector button
6. SDS Plus tool holder
7. Depth adjustment rod
8. Side handle
9. Depth rod button
10. Sleeve
11. Dust cover
12. Date code
13. Locking collar (D25134, D25144)
14. Keyless chuck (D25134, D25144)
15. Side handle work light (D25144, D25263)
16. Battery door screw (D25144, D25263)
17. On/off light button (D25144, D25263)

Intended Use
The D25032 heavy-duty rotary hammer has been designed for professional drilling, hammer drilling, and screwdriving. The D25033, D25133, D25134, D25143, D25144 and D25263 heavy duty rotary hammers have been designed for professional drilling, hammer drilling, screwdriving and light chipping.
DO NOT use under wet conditions or in the presence of flammable liquids or gases.
These hammer drills are professional power tools.
DO NOT let children come into contact with the tool.
Supervision is required when inexperienced operators use this tool.

• Young children and the infirm. This appliance is not intended for use by young children or infirm persons without supervision.
• This product is not intended for use by persons (including children) suffering from diminished physical, sensory or mental abilities; lack of experience, knowledge or skills unless they are supervised by a person responsible for their safety. Children should never be left alone with this product.

Torque Limiting Clutch
All rotary hammer drills are equipped with a torque limiting clutch that reduces the maximum torque reaction transmitted to the operator in case of jamming of a drill bit. This feature also prevents the gearing and electric motor from stalling.
The torque limiting clutch has been factory-set and cannot be adjusted.

ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before making any adjustments or removing/ installing attachments or accessories. Be sure the trigger switch is in the OFF position. An accidental start-up can cause injury.

Selecting the Operating Mode (Fig. B)
The tool can be used in the following operating modes:

| Rotary drilling: for screwdriving and for drilling into steel, wood and plastics
---|---
| Hammer drilling: for concrete and masonry drilling operations.
Bit rotation: non-working position used only to rotate a flat chisel into the desired position
| Hammering only (D25033, D25133, D25134, D25143, D25144, D25263): for light chipping, chiselling and demolition applications. In this
mode the tool can also be used as a lever to free a jammed drill bit.

1. To select the operating mode, press the mode selector button  5  and rotate the mode selector switch  4  until it points to the symbol of the required mode.
2. Release the mode selector button and check that the mode selector switch is locked in place.

WARNING: Do not select the operating mode when the tool is running.

Indexing the Chisel Position (Fig. B)
The chisel can be indexed and locked into different positions.

1. Press the mode selector button  5  and rotate the mode selector switch  4  until it points to the “bit rotation/ hammer drilling” position.
2. Rotate the chisel to the desired position.
3. Set the mode selector switch  4  to the “hammering only” position.
4. Twist the chisel until it locks in position.

Inserting and Removing SDS Plus Accessories (Fig. C)
This tool uses SDS Plus accessories (refer to the inset in Fig. C for a cross- section of an SDS Plus bit shank). We recommend using professional accessories only.

1. Clean and grease the bit shank.
2. Insert the bit shank into the SDS Plus tool holder  6 .
3. Push the bit down and turn it slightly until it fits into the slots.
4. Pull on the bit to check if it is properly locked. The hammering function requires the bit to be able to move axially several centimetres when locked in the tool holder.
5. To remove a bit, pull back the tool holder sleeve  10  and pull out the bit.

WARNING: Always wear gloves when you change accessories. The exposed metal parts on the tool and accessory may become extremely hot during operation.

Fitting the Side Handle (Fig. D)
The side handle  8  can be fitted to suit both right-handed and left-handed users.
WARNING: Do not use the tool without the side handle properly assembled.

1. Loosen the side handle.

2. For right-handed users: Slide the side handle clamp over the collar behind the tool holder, handle at the left.
   For left-handed-users: Slide the side handle clamp over the collar behind the tool holder, handle at the right.

3. Rotate the side handle to the desired position and tighten the handle.

Side Handle Work light (Fig. E)
D25144, D25263
The side handle on the D25144 and D25263 has a work light  15 . The light is battery powered and operated by using the on/off button  17 .
To replace the work light’s batteries (CR2032 x 2):

1. Remove battery door screw  16  as shown in Figure E.
2. Replace the battery with the positive face pointing outwards.
3. Close the battery compartment and secure the screw.

Setting the Drilling Depth (Fig. F)

1. Insert the required drill bit as described above.
2. Press the depth rod button  9  and keep it depressed.
3. Fit the depth adjustment rod  7  through the hole in the depth stop clamp.
4. Adjust the drilling depth as shown.
5. Release the depth stop clamp.

Reversing Lever (Fig. G)
The forward/reverse lever  3  is used to reverse the rotation of the hammer for backing out fasteners or jammed bits in the drill-only function.

CAUTION: When reversing to clear jammed bits, be ready for strong reactive torque.
To reverse the hammer, turn it off and align the forward/reverse lever  3 with the yellow arrow pointing backward.
To position the lever for forward operation, turn the hammer off and align the forward/reverse lever  3  with the yellow arrow pointing forward.

Fitting the Chuck Adapter and Chuck Optional Accessory
D25032, D25033, D25133, D25143, D25263

1. Screw the chuck onto the threaded end of the chuck adapter.
2. Insert the connected chuck and adapter in the tool as though it were a standard SDS Plus bit.
3. To remove the chuck, proceed as for removing a standard SDS Plus bit.

WARNING: Never use standard chucks in the hammer drilling mode.

Replacing the SDS Plus Tool Holder with the Keyless Chuck (Fig. H)
D25134, D25144

1. Turn the locking collar  13  into the unlocking position and pull the SDS Plus Tool Holder  6  off.
2. Push the keyless chuck  14  onto the spindle and turn the locking collar  13  to the locking position.

To replace the keyless chuck with the SDS Plus tool holder, first remove the keyless chuck the same way the tool holder was removed. Then place the tool holder the same way the keyless chuck was placed, making sure to turn the locking collar to the locking position.

WARNING: Never use standard chucks in the hammer drilling mode.

Replacing the Dust Cover (Fig. A)
The dust cover  11  prevents dust ingress into the mechanism.
Replace a worn dust cover immediately.

1. Pull back the tool holder locking sleeve  10  and pull the dust cover  11  off.
2. Fit the new dust cover.
3. Release the tool holder locking sleeve.

OPERATION

Instructions for Use

WARNING: Always observe the safety instructions and applicable regulations.
WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before making any adjustments or removing/ installing attachments or accessories. Be sure the trigger switch is in the OFF position. An accidental start-up can cause injury.

WARNING:

• Always observe the safety instructions and applicable regulations.
• Be aware of the location of pipework and wiring.
• Apply only a gentle pressure to the tool (approx. 5 kg). Excessive force does not speed up drilling but decreases tool performance and may shorten tool life.
• Do not drill or drive too deep to prevent damage to the dust cover.
• Always hold the tool firmly with both hands and ensure a secure stance (Fig. I). Always operate the tool with the side handle properly mounted.

Proper Hand Position (Fig. I)

WARNING: To reduce the risk of serious personal injury, ALWAYS use proper hand position as shown.
WARNING: To reduce the risk of serious personal injury, ALWAYS hold securely in anticipation of a sudden reaction.
Proper hand position requires one hand on the side handle  8 , with the other hand on the main handle  2 .

Switching On and Off (Fig. A)

1. To run the tool, press the variable speed switch  1 . The pressure exerted on the variable speed switch determines the tool speed.
2. For continuous operation, press and hold down the variable speed switch.
3. To stop the tool, release the switch.

Hammer drilling (Fig. A)
Drilling with a Solid Bit

1. Hold down the mode selector button  5  then set the mode selector switch  4  to the hammer drilling position.

2. Insert the appropriate drill bit.
   NOTE: For best results use high quality carbide-tipped bits.

3. Adjust the side handle  8  as required.

4. If necessary, set the drilling depth.

5. Mark the spot where the hole is to be drilled.

6. Place the drill bit on the spot and switch on the tool.

7. Always switch off the tool when work is finished and before unplugging.

Drilling with a Core Bit

1. Hold down the mode selector button  5  then set the mode selector switch  4  to the hammer drilling position.
2. Adjust the side handle  8  as required.
3. Insert the appropriate core bit.
4. Assemble the center drill into the core bit.
5. Place the center drill on the spot and press the on/off switch  1 . Drill until the core penetrates into the concrete approx. 1 cm.
6. Stop drilling and remove the center drill. Place the core bit back into the hole and continue drilling.
7. When drilling through a structure thicker than the depth of the core bit, break away the round cylinder of concrete or core inside the bit at regular intervals. To avoid unwanted breaking away of concrete around the hole, first drill a hole the diameter of the center drill completely through the structure. Then drill the cored hole halfway from each side.
8. Always switch off the tool when work is finished and before unplugging.

Rotary Drilling (Fig. A)

1. Hold down the mode selector button  5  then set the mode selector switch  4  to the “rotary drilling” position.

2. Depending on your tool, follow either of the following instructions:
   – D25032, D25033, D25133, D25143, D25263: Fit the chuck adapter/chuck assembly.
   – D25134, D25144: Replace the SDS Plus tool holder with the keyless chuck.

3. Proceed as described for hammer drilling.

WARNING: Never use standard chucks in the hammer drilling mode.

Screwdriving (Fig. A)

1. Hold down the mode selector button  5  then set the mode selector switch  4  to the rotary drilling position.

2. Select the direction of rotation.

3. Depending on your tool, follow either of the following instructions:
   – D25032, D25033, D25133, D25143, D25263: Insert the special SDS Plus screwdriving adaptor for use with hexagonal screwdriver bits.
   – D25134, D25144: Replace the SDS Plus tool holder with the keyless chuck

4. Insert the appropriate screwdriver bit. When driving slotted head screws always use bits with a finder sleeve.

5. Gently press the variable speed switch  1  to prevent damage to the screw head. In reverse (LH) rotation the tool speed is automatically reduced for easy screw removal.

6. When the screw is flush with the workpiece, release the variable speed switch to prevent the screw head from penetrating into the workpiece.

Chipping and Chiselling (Fig. A)
D25033, D25133, D25134, D25143, D25144, D25263

1. Hold down the mode selector button  5  then set the mode selector switch  4  to the “hammering only” position.
2. Insert the appropriate chisel and rotate it by hand to lock it into position.
3. Adjust the side handle  8  as required.
4. Switch on the tool and start working.
5. Always switch off the tool when work is finished and before unplugging.

WARNING:

• Do not use this tool to mix or pump easily combustible or explosive fluids (benzine, alcohol, etc.).
• Do not mix or stir in flammable liquids labelled accordingly.

MAINTENANCE

Your DeWALT power tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.
WARNING: To reduce the risk of serious personal injury, turn tool off and disconnect tool from power source before making any adjustments or removing/ installing attachments or accessories. Be sure the trigger switch is in the OFF position. An accidental start-up can cause injury.

• This machine is not user-serviceable. Take the tool to an authorised DeWALT repair agent after approximately 40 hours of use. If problems occur before this time contact an authorised DeWALT repair agent.
• The tool will automatically switch off when the carbon brushes are worn.

Motor Brushes
DeWALT uses an advanced brush system which automatically stops the drill when the brushes wear out. This prevents serious damage to the motor. New brush assemblies are available at authorised DeWALT service centers. Always use identical replacement parts.

Lubrication
Your power tool requires no additional lubrication.
Accessories and attachments used must be regularly lubricated around the SDS Plus fitment.

Cleaning
WARNING: Blow dirt and dust out of the main housing with dry air as often as dirt is seen collecting in and around the air vents. Wear approved eye protection and approved dust mask when performing this procedure.
WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals may weaken the materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

Optional Accessories
WARNING: Since accessories, other than those offered by DeWALT, have not been tested with this product, use of such accessories with this tool could be hazardous.
To reduce the risk of injury, only DeWALT recommended accessories should be used with this product.
Various types of SDS Plus drill bits and chisels are available as an option.
Consult your dealer for further information on the appropriate accessories.

Protecting the Environment
**** Separate collection. Products and batteries marked with this symbol must not be disposed of with normal household waste.
Products and batteries contain materials that can be recovered or recycled reducing the demand for raw materials. Please recycle electrical products and batteries according to local provisions. Further information is available at www.2helpU.com.

United Kingdom
DeWALT, 210 Bath Road;
Slough, Berks SL1 3YD
Tel: 01753-567055
Fax: 01753-572112
www.dewalt.co.uk
emeaservice@sbdinc.com
Australia
DeWALT
810 Whitehorse Road Box Hill
VIC 3103 Australia
Tel: Aust 1800 338 002
Tel: NZ 0800 339 258
www.dewalt.com.au
www.dewalt.co.nz

References

• 2helpU
• Dewalt.co

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>