MI M82 Smart Pen 2nd Generation User Guide

June 13, 2024
Mi

MI M82 Smart Pen 2nd Generation

OVERVIEW

MI-M82-Smart-Pen-2nd-Generation-1

Thank you for choosing Xiaomi Smart Pen (2nd generation)
This product is only compatible with Xiaomi Pad 6 / Xiaomi Pad 5

Pairing and Charging

Please attach the stylus body horizontally to the centre of the long side of the tablet (as shown in the figure), perform Bluetooth pairing and start charging.
Note : Please turn on the Bluetooth function on your tablet beforehand
For more information, visit our official website: www.mi.com/global/service/userguide

WEEE

Special precautions must be taken to safely dispose of this product. This marking indicates that this product may not be discarded with other household waste in the EU.
To prevent harm to the environment or human health from inappropriate waste disposal, and to promote sustainable reuse of material resources, please recycle responsibly. To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased.

CAUTION

  • RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.
  • Additional safety information and precautions can be accessed at the following link: www.mi.com/en/certification

Important Safety Information

Read all safety information below before using your device:

  • Use of unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks.
  • Use only authorized accessories which are compatible with your device.
  • This device’s operating temperature range is 5°C to 50°C. Using this device in an environment outside of this temperature range may damage the device.
  • If your device is provided with a built-in battery, to avoid damaging the battery or the device, do not attempt to replace the battery yourself.
  • The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion.
  • Dispose of or recycle the device, its battery, and accessories according to your local regulations.
  • Do not disassemble, hit, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately.
    • Do not short circuit the battery, as this may cause overheating, burns, or other injury.
    • Do not place the battery in a high temperature environment.
    • Overheating may cause explosion.
    • Do not disassemble, hit, or crush the battery, as this may cause the battery to leak, overheat, or explode.
    • Do not burn the battery, as this may cause fire or explosion.
    • If the battery appears deformed or damaged, stop using it immediately
  • User shall not remove or alter the battery. Removal or repair of the battery shall only be done by an authorized repair center of the manufacturer.
  • Keep your device dry.
  • Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center.
  • Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device.
  • Your device is not a toy. As with all electrical products, precautions should be observed during handling and using of electrical products to reduce the risk of electric shock. If parents choose to allow children to use the device, they should caution his or her child about the potential hazard while using and handling the device.

Safety Precautions

  • Observe all applicable laws and rules restricting use of device in specific situations and environments.
  • Do not use your device in hospital operating rooms, emergency rooms, or intensive care units. Always comply with all rules and regulations of hospitals and health centers. If you have a medical device, please consult your doctor and the device manufacturer to determine whether your device may interfere with the device’s operation. To avoid potential interference with a pacemaker, always maintain a minimum distance of 15 cm between your device and the pacemaker.To avoid interference with medical equipment, do not use your device near hearing aids, cochlear implants, or other similar devices.
  • Do not use your device in places with high humidity, such as bathrooms. Doing so may result in electric shock, injury, fire, and charger damage.

EU Regulations RED Declaration of Conformity

Xiaomi Communications Co., Ltd. hereby declares that this product 23031MPADC is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU and RoHS Directive 2011/65/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.mi.com/en/certification

Legal Information

  • This device may be operated in all member states of the EU.
  • Observe national and local regulations where the device is used.
  • Restrictions in the 2.4 GHz band:
  • Norway: This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.

Frequency Bands and Power
This device offers the following frequency bands in EU areas only and maximum radio-frequency power: 2.4GHz Bluetooth: 6.79 dBm Wireless charging: 145 KHz < 3.69 dBuA/m at 10m Distance

EU Regulations DISPOSAL INFORMATION
This symbol mark is for EU countries only. This symbol mark is according to the directive 2006/66/EC Article 20 Information for end-users and Annex II. Your product is designed and manufactured with high quality materials and components which can be recycled and/or reused. This symbol at their end-of- life, should be disposed of separately from your household waste. In the European Union there are separate collection systems for used Batteries and accumulators. Please, dispose of batteries and accumulators correctly at your local community waste collection/recycling centre. Please, help us to conserve the environment we live in!

Manufacturer’s Authorized EU Representative

  • Name: Xiaomi Technology Netherlands B.V
  • Address: Prinses Beatrixlaan 582, 2595BM, The Hague, The Netherlands

UK Regulations

The Radio Equipment
Regulations 2017; 2017 No. 1206
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012; 2012 No.3032

Manufacturer’s Authorized UK Representative
Name : Xiaomi Technology UK Limited Address: Part Ground Floor, North Wing, 100 Brook Drive, Green Park, Reading

REGULATORY STATEMENT

Federal Communications Commission (FCC) notice: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).

Disclaimer

This quick start guide is published by Xiaomi or its local affiliated company. Improvements and changes to this guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new online editions of the quick start guide (please see details at www.mi.com/global/service/userguide). All illustrations are for illustration purposes only and may not accurately depict the actual device.

Manufacturer: Xiaomi Communications Co., Ltd.
Manufacturer postal address: #019, 9th Floor, Building 6, 33 Xi’erqi Middle Road,Haidian District, Beijing, China, 100085
Brand : Xiaomi
Product name : Stylus for Tablet Model: 23031MPADC
© Xiaomi Inc. All rights reserved.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals