Tuliyet Dash Cam Front and Rear User Manual
- June 14, 2024
- Tuliyet
Table of Contents
Tuliyet Dash Cam Front and Rear
- Please download WIFI products (No download required for non-WIFI) Press and hold the key to open the hot spot of the machine.
Working Environment
Key Features (picture for reference only, mainly in kind)
Product Specification
- DDR: Built-in 64M
- FLASH: 8M SPI norflash
- Display Screen: 2.0 inch IPS HD screen
- LCD resolution: 800X480 pixels
- External port: MINI USB 5V/2A power adapter port Max support128G Class 10 TF card 2.5mm digital 720P rear view lens port
- Speaker: Monophonic 15*10mm speaker
- MIC: 4015 Standard Omnidirectional Microphone
Features
- Front Camera: 6-glass/F2.Oaperture/170°wide angle
- Inside camera (optional): VGA 120°
- GPS tracker: NO
- AV OUT: NO
- Rear camera: 6M cable/2.5mm port
- Photo: Support
- Lens rotates: Adjust manually
- WDR: Support
- HDR: Support
- Reversing visual: Support
- Video format: AVI
- Image format: JPG
- Compression format: H.264
- Battery: 320mAh polymer lithium battery
- Language: support multi-language
- G-sensor: Support
- Menu / Camera / Playback
- Power button
- Down
- Confirm button
- Up
- Front Camera
- Microphone
- Reset button
- Holder interface
- Rear camera interface
- Power interface
- TF Card slot
- Display screen
- Inside camera(optional)
- Turn night vision on / off
[ ]Power button, short press to turn on/off screen, long press to switch on/
off the device.
[ M ] Menu/camera/playback button Press the [OK] key to stop recording,
press [ M ] to enter photo mode, and press [OK] to take a photo: In
the camera mode, press [ M] to enter playback mode, press [OK] key to
playback. Lock function: In the case of video recording, short press [ M ]
for a key lock function to protect the current video file and this file will
not be covered by the cycle video In video mode long press [ M ] to enter
the video menu settings as follows:
In photo mode long press [M] to enter the photo menu settings as follows
Down key, short press to select function at the Menu interface, short press
button to turn on/off sound record at the shooting interface.
Up key. 1, short press to select a function at the Menu interface; 2, In case
of video recording, short press the OK button to pause, then short press the
Ibutton to switch front- inside view image (require inside view lens); 3, long
press button to switch front-rear view image; 4, In case of front-rear view
image, short press OK button to pause, then short press button to switch
front-rear view image (require rear view lens) [OK] Confirm button, short
press to confirm in the menu interface, short press to video record on/ off in
the video mode
Rearview lens (optional)
In the case of video recording. 4-pin plug of rearview lens insert AV-in hole
of the device, there’s a rear view image in the top right of the screen, that
means connected successfully; short press OK button to pause, long press
button to switch front-rear view image, When to hang up “ R ” gear, it
will show the full image of rear view
Note: This device can only support dual cameras to video record at the
same time instead of 3 channels camera, that is front-inside camera or a
front-rear camera; if installed a rearview.
will not be an overwritten cycle.
- (note) Gravity sensor (G-Sensor)sensitivity adjustment support may actually need to change the setting in the setup menu according to their image.
- The device has a key lock feature that will need to retain an image without being locked loop overwritten In the video mode, a short press [M] key logger will then lock the entire video image.
- In shooting mode, Press the [M] key to enter the menu setting, find the date/ time menu,
- short press the [OK] button to confirm and return to the setup menu settings, and press the [M] key to exit the menu setting. [note] In order to effectively record the date and time of traffic safety accident forensics, before using the menu setting.
File playback
In the playback mode, press the {OK} key to playback. To exit playback
mode, press the MODE button again.
Reversing visual function
First, you must connect the DVR to the car charger, and the rear-view camera
connect the reversing lights. Insert the car charger, machine will
automatically start recording status, The screen switch R position in the
recording mode automatically switches to the rear-view camera, and displays
the reverse image. After reversing the visual machine automatically returns to
video mode.
Reminder: Please test the rearview camera is normal before installation.
Parking monitor(To achieve unattended surveillance video)
To achieve this function must be connected to the machine in the case of
electricity, in the main menu to open the motion detection and parking
monitoring function, in the standby state of the vehicle under vibration or
moving objects in front, the recorder according to G-sensor to sense
automatically start the machine and automatically locks the video for 30
seconds, and automatically save the video file, the video 30 seconds after 5
seconds without the operation will automatically shut down. [note] This
function is only used when stopping. Please turn off the motion detection and
stop monitoring function during normal driving.
- Camera and choose front-inside view mode, it will automatically indicate the full image of the car reversing visual when you hang up “R” gear, but won’t affect the front-inside video record, also will automatically switch back to front-inside view after cancelling “R” gear.
- As for the system update to support 3 channels of camera to video record at the same time, please prevail in kind and we’re sorry for no further notice. Reset key [RESET] is the we are device then press total to return in devi normal fault, press RESET to
Installation Notes
-
Please test the rearview camera first, if it works well then install it (a package without a rearview lens can be ignored).
-
Turn off the car engine.
-
The TF card inserts the recorder slot.
[Note] Please use the high-speed TF card (Class 10 above), with a capacity of not less than 4GB. TF card maximum support128GB. -
The recorder via a bracket fixed to the front windshield of the car.
-
Insert the car charger into the car cigarette lighter.
(Note) When wiring, extend the charging line along the edge of the car door frame and carpet under the car laying. -
Install the rear camera at the rear of the vehicle, and pay attention to the up and down direction. Wiring can be buried along the edge of the car roof laying. [Note] There are two ways to install the rear camera:
А. Adsorbed on the glass above and behind the car, hands-on self- installation (Reversing visual function can not be achieved, only real-time recording rear video).
B. To find a professional installation staff installed on the license plate above the
camera at the same time needs to connect the power reversing lights (Reversing visual function can be achieved). -
Adjust the lens position to ensure the best viewing angle.
-
Start the engine and check that the machine is operating properly.
Features
-
Use the automatic recording function
Start the car engine, the recorder automatically starts to open the recording function.
Close the car engine, The recorder automatically saves the contents of the log and shuts down, recorded video segments are stored on the TF card. When the TF card is full, the recorder will overwrite the oldest recorded image preferentially.
[Note]- The time segment of the record can be set to 1/2/3 minutes in the menu.
- The video is individually saved in the folder named “DCIMA” and “DCIMB” in the TF card (package includes rear view lens).
-
Use motion detection In standby mode, enter the menu screen and open the motion detection mode. When the lens is sensitive to the peripheral area of a moving object, the state machine into the camera, recording 30 seconds after the system stops recording. To exit the motion detection mode, in standby mode enter the menu screen and close motion detection mode.
-
G-sensor The built-in gravity sensor (G-sensor), if a serious vehicle collision, the recorder will lock the first
-
seconds and 10 seconds after the image date when the accident occurred while the bottom left of the display screen displays a lock icon; locked images will be saved as a special file, the file.
The information provided in this manual is for reference only. Please prevail in kind (some special features depend on different models) . All rights reserved.
Install the APP and connect to WiFi
- Press OK at the bottom of the recorder to stop recording
- Long press the M key to display the menu
- Tap the M button to change to the menu, select Wifi Control in the menu and turn it on.
- In the cell phone settings page, connect the car recorder’s wifi-ACTION CAM60def40f5fb0. WiFi Password: 12345678
- After a successful connection, open the APP to use it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>