Jabra Evolve 65 SE MS Mono Bluetooth Headsets Instructions
- June 15, 2024
- Jabra
Table of Contents
Jabra Evolve 65 SE MS Mono Bluetooth Headsets
Product information
Specifications:
- Model: Jabra Evolve 65 SE MS Mono
- Bluetooth Version: 4.0
- Wireless Range: Up to 30 meters
- Microphone Type: Noise-canceling
- Battery Life: Up to 10 hours
- Charging Time: Approximately 2 hours
Product Usage Instructions
Pairing with Bluetooth Devices:
- Make sure the headset is charged.
- Put the headset in pairing mode by pressing and holding the Answer/end button until the LED light starts flashing blue.
- On your Bluetooth device, enable Bluetooth and search for available devices.
- Select “Jabra Evolve 65 SE MS Mono” from the list of available devices.
- If prompted, enter the PIN code “0000” to complete the pairing process.
Answering and Ending Calls:
To answer incoming calls, press the Answer/end button once. To end a call,
press the Answer/end button again.
Adjusting Volume:
To increase the volume, press the Volume up button. To decrease the volume,
press the Volume down button.
Resetting to Default Settings:
If you need to reset your Jabra Evolve 65 to its default settings, follow
these steps:
- Make sure the headset is turned on.
- Simultaneously press and hold the Answer/end button and the Volume up button for approximately 5 seconds.
- The LED light will blink green 5 times, indicating that the reset is complete.
Note: After resetting, you will need to re-pair your Jabra Evolve 65 with your Bluetooth devices, including the Jabra Link Bluetooth adapter.
Frequently Asked Questions
-
Q: How long does the battery last on the Jabra Evolve 65 SE MS Mono?
A: The battery life of the Jabra Evolve 65 SE MS Mono is up to 10 hours. -
Q: How do I charge the headset?
A: To charge the headset, connect the included USB cable to the charging port on the headset and the other end to a USB power source. The charging time is approximately 2 hours. -
Q: Can I use the Jabra Evolve 65 with non-Bluetooth devices?
A: Yes, you can use the Jabra Evolve 65 with non-Bluetooth devices by connecting it using the included 3.5mm audio cable.
RESETING
How do I manually reset my Jabra Evolve 65 headset to the default settings?
When you reset your Jabra Evolve 65, previously paired devices and settings
will be cleared. To reset, simultaneously press and hold (5 seconds) the
Answer/end button and the Volume up button until the LED blinks green 5 times
indicating the reset is complete.
Note
After resetting you must re-pair your Jabra Evolve 65 with your Bluetooth
devices, including the Jabra Link Bluetooth adapter.