RAM MOUNTS RAM-B-102-UN7U X-Grip Phone Mount with Diamond Base Instruction Manual
- June 13, 2024
- RAM MOUNTS
Table of Contents
RAM MOUNTS RAM-B-102-UN7U X-Grip Phone Mount with Diamond Base
Product Information
The product is a mounting system manufactured by National Products, Inc. It is designed to securely hold various devices in place, such as smartphones, tablets, GPS devices, and other electronic devices. The product comes with multiple parts, including glue and a tether (recommended for rugged environments and open cockpit applications). It is important to note that the use of the tether is optional.
Product Usage Instructions
- Ensure that you have all the necessary parts listed in the parts index.
- If you plan to use the tether, attach it to the appropriate location on the mounting system.
- Prepare the surface where you intend to mount the product. Make sure it is clean and free from any dirt or debris.
- Apply the glue to the back of the mounting system or directly onto the surface where you will be mounting it.
- Press the mounting system firmly against the desired surface and hold it in place for a few seconds to ensure proper adhesion.
- Allow the glue to dry completely before using the product. Refer to the glue manufacturer’s instructions for drying time.
- If you encounter any issues during installation or have further questions, please contact support@rammount.com or call 1.800.497.7479 for assistance.
For additional mounting options, please visit rammount.com for more information.
Parts Index
Using Instructions
Contact
- rammount.com
- 1.800.497.7479
- support@rammount.com
To see more mounting options, visit: rammount.com
This document, including images, may not be reproduced partly or fully without the expressed written consent of National Products, Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>