PCE-DC1 Clamp on Tester User Manual
- June 12, 2024
- PCE
Table of Contents
PCE-DC1 Clamp on Tester
Product Information
- Product: Clamp on Tester
- Model: PCE-DC1
- Manufacturer: PCE Deutschland GmbH
- Address: Im Langel 4, 59872 Meschede, Germany
Contact Information:
- Telephone : +49 (0) 2903 / 976 99 0
- Fax : +49 (0) 2903 / 976 99 29
- Email : info@warensortiment.de
- Website : www.warensortiment.de
- EU Directive: 2006/95/EC
Standards:
- EN 61010-1:2001
- EN61010-2-032:2002
Product Usage Instructions
To use the Clamp on Tester (PCE-DC1), please follow these steps:
- Ensure that the power supply is disconnected and the device is turned off.
- Identify the electrical circuit or cable you wish to measure.
- Open the clamp jaws of the tester and place them around the circuit or cable.
- Close the clamp jaws securely to ensure proper contact.
- Turn on the tester and select the desired measurement mode.
- Read the measurement results from the display.
- After use, turn off the tester and disconnect it from the power supply.
Declaration of conformity
We hereby declare that the product to which this declaration refers conforms with the following standards
PCE Deutschland GmbH Im Langel 4 59872 Meschede
Tel: +49 (0) 2903 / 976 99 0
Fax: +49 (0) 2903 / 976 99 29
E-Mail: info@warensortiment.de
Internet : http://www.warensortiment.de
Clamp on Tester: PCE-DC1
| Mark applied | EU Directive | Standards |
|---|---|---|
2006/95/EC
|
EN 61010-1:2001
EN61010-2-032: 2002
Meschede, 23.July.2008
Ort und Datum
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>