FUSION FM-S10S Flush Mount Series Subwoofer Instructions
- June 12, 2024
- FUSION
Table of Contents
FUSION FM-S10S Flush Mount Series Subwoofer
Printing a Mounting Template
NOTICE
It is not recommended that you print a mounting template on your own. Use the
template that came in the product box.
If you do print the template, you must follow these instructions for printing
a mounting template precisely. To print large templates, you need large enough
paper and printer. Failure to have the correct sized paper and printer, or a
failure to follow these instructions, may result in an incorrectly sized
template and therefore an incorrect cutout (too large or too small) on the
mounting surface of your boat.
NOTE: The options and locations of the options differ between Adobe Acrobat versions and other PDF viewing/printing applications. Be sure the scaling is 100% before printing.
- Select File > Print.
- Enter 2 in Pages to Print ➊.
- Select Actual Size➋ for Page Sizing & Handling.
- Verify that the paper size is larger than the template ➌. In this example, the paper is not larger than the template.
- If the paper size is not large enough, select Properties ➍ and select a Paper Size that is larger than the template.
- After printing the template, use a ruler to measure at least one dimension line to ensure the template printed to 100% scale.
NOTICE
Garmin is not responsible for any damages or expenses resulting from a miscut mounting surface arising from a failure to follow these instructions.
Flush Mount Series
FM-S10S Subwoofer
