SALTER EK4535 3kW Kettle Instruction Manual
- June 12, 2024
- SALTER
Table of Contents
SALTER EK4535 3kW Kettle
Safety Instructions
When using electrical appliances, basic safety precautions should always be
followed.
Check that the voltage indicated on the rating plate corresponds with that of
the local network before connecting the appliance to the mains power supply.
Children aged from 8 years and people with reduced physical, sensory or mental
capabilities or lack of experience and knowledge can use this appliance, only
if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children should be supervised to ensure that they do not play with the
appliance.
Unless they are older than 8 and supervised, children should not perform
cleaning or user maintenance.
This appliance is not a toy – children should be supervised to ensure that
they do not play with the appliance.
If the power supply cord, plug or any part of the appliance is malfunctioning
or if it has been dropped or damaged, cease using the product immediately to
avoid potential injury.
This appliance contains no user serviceable parts, only a qualified
electrician should carry out repairs. Improper repairs may place the user at
risk of harm.
Keep the appliance and its power supply cord away from heat or sharp edges
that could cause damage.
Do not immerse the electrical components of this appliance in water or any
other liquid.
Do not operate the appliance with wet hands, or if any connections are wet.
Do not leave the appliance unattended whilst connected to the mains power
supply.
Do not remove the appliance from the mains power supply by pulling the cord;
switch it off and remove the plug by hand.
Do not pull or carry the appliance by its power supply cord.
Do not use the appliance for anything other than its intended use.
Do not use any power supply base unit other than the one provided with this
appliance.
Do not store the appliance in direct sunlight or in high humidity conditions.
Do not move the appliance when it is in use.
Do not fill the appliance above its max. fill mark. Overfilling the appliance
may cause boiling water to be ejected.
Always unplug the appliance after use and allow it to cool fully before any
cleaning, user maintenance or when storing it away.
Always use the appliance on a stable, heat-resistant surface, at a height that
is comfortable for the user.
Use of an extension cord with the appliance is not recommended.
This appliance should not be operated by means of an external timer or
separate remote control system.
This appliance is intended for domestic use only. It should not be used for
commercial purposes.
Exercise caution when using this appliance, as steam will be emitted from the
spout and/or lid, especially whilst refilling.
CAUTION : Hot surface – do not touch the hot section or heating
components of the appliance.
The heating element surface is subject to residual heat after use. Always
allow the appliance to cool thoroughly before touching or opening the lid.
WARNING : Boiling water and steam can cause serious injury; exercise
extreme caution when using this appliance. Do not remove the lid while the
kettle is boiling.
Misuse of the appliance could cause injury to the user.
Boil-dry Sensor
The kettle is equipped with a boil-dry sensor. If the kettle is accidentally turned on whilst empty, the boil-dry sensor will activate causing the power to switch off. The kettle will then remain inactive and the power switch will not function for several minutes until the kettle is cool. Do not try to use the kettle during this time; once it has cooled down, it will resume its normal function.
Care and Maintenance
Wipe the kettle and power base with a soft, damp cloth then allow it to dry
thoroughly.
Do not immerse the kettle in water or any other liquid.
Never use harsh or abrasive cleaning detergents or scourers to clean the
kettle as this could cause damage.
Removing Limescale
Limescale can develop over time and may affect the performance and lifespan of
the kettle.
It is recommended to descale the kettle regularly, at least once every three
months, especially if the kettle is used in a hard water area. Frequent
descaling will improve the performance and lifespan of the kettle.
STEP 1 : Fill the kettle to the max. fill mark with cold water.
STEP 2 : Add a commercial descaling agent to the kettle, adhering to the
manufacturer’s instructions. It is not recommended to use vinegar to descale
the kettle.
STEP 3 : Allow the kettle to boil, switch it off and leave to soak for at
least 20 minutes or for the length of time specified on the descaling product.
STEP 4 : Empty the kettle and refill to the max. fill mark with clean
water. Boil the kettle once more and pour the water away after it has cooled.
The kettle should now be descaled.
If the kettle switches off before it has boiled or a white deposit is noticed on the inside of the kettle, it needs to be descaled. Add a commercial descaling agent to the kettle, adhering to the manufacturer’s instructions. It is not recommended to use vinegar to descale the kettle.
Description of Parts
- 3 kW Kettle
- Power base
- Power switch with indicator light
- Handle
- Min. fill mark (0.6 L)
- Max. fill mark (1.8 L)
- Water fill gauge
- Spout
- Pull-top lid
Instructions for Use
Before First Use
Before using the kettle for the first time, wipe it clean with a soft, damp
cloth and dry thoroughly.
Check that the limescale filter is attached.
NOTE : When using the kettle for the first time, a slight odour may be
emitted. This is normal and will soon subside. Allow for sufficient
ventilation around the kettle.
WARNING : The kettle is not suitable for dishwasher use.
Removing the ‘New Kettle’ Taste
Fill the kettle to the max. fill mark and boil the water, following the
instructions in the section entitled ‘Using the Kettle’. If any slight ‘new
kettle’ taste or odour remains in the boiled water, discard this and refill
the kettle to three-quarters full.
Once boiled, add two tablespoons of bicarbonate of soda and leave to stand
overnight. Discard the water then re-boil a couple of times to remove any
residue.
Using the 3 kW Kettle
STEP 1 : Remove the kettle from the power base.
STEP 2 : Open the pull-top lid and fill the kettle to the desired water
level, between the min. fill mark and the max. fill mark. Replace the lid
making sure it clicks securely shut and place the kettle back onto the power
base.
STEP 3 : Plug in and switch on the kettle at the mains power supply and
flip the power switch to the ‘on’ position until it clicks; it will illuminate
to indicate that it is switched on. Do not touch the body of the kettle during
use.
STEP 4 : Once the kettle has boiled, the power switch will automatically
flip back into the off position.
NOTE : The boiling process can be cancelled at any time by flicking the
power switch back into the off position.
CAUTION : Allow the kettle to cool thoroughly before touching or opening
the pull-top lid.
Storage
The kettle must be cool, clean and dry before storing in a cool, dry place.
Never wrap the cord tightly around the kettle; wrap it loosely to avoid
causing damage.
Specifications
Product code: EK4535
Input: 220-240 V ~ 50-60 Hz
Output: 3000 W
If this product does not reach you in an acceptable condition please contact
our Customer Services Department at www.salter.com
Please have your delivery note to hand as details from it will be required.
If you wish to return this product, please return it to the retailer from
where it was purchased with your receipt (subject to their terms and
conditions).
Disposal of Waste Batteries and Electrical and Electronic Equipment
This symbol on the product, its batteries or its packaging means that this product and any A batteries it contains must not be disposed of with household waste. Instead, it is the user’s responsibility to hand this over to an applicable collection point for the recycling of batteries and electrical and electronic equipment. This separate collection and recycling will help to conserve natural resources and prevent potential negative consequences for human health and the environment due to the possible presence of hazardous substances in batteries and electrical and electronic equipment, which could be caused by inappropriate disposal. Some retailers provide take-back services which allow the user to return exhausted equipment for appropriate disposal. It is the user’s responsibility to delete any data on electrical and electronic equipment prior to disposal. For more information about where to drop batteries, electrical and electronic waste off, please contact the local city /municipality office, household waste disposal service, or the retailer.
Find us on
www.facebook.com/SalterUK
Customer Support
Manufactured by:
UP Global Sourcing UK Ltd.,
Victoria Street, Manchester OL9 ODD. UK.
Edmund-Rumpler StraBe 5, 51149 K6In. Germany.
Made in China.
©Salter trademark. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>