ULINE Convex Safety Mirror User Guide

ULINE Convex Safety Mirror User Guide

PARTS INCLUDED

INDOOR

• Mirror
  
  

• **Base Plate

**

• Offset Bracket
  

• Metal Channel
  

• BACK VIEW
  

OUTDOOR

• Mirror
• **Base Plate x 2

**

• Offset Bracket x 2
  
  

• Metal Channel x 2
  
  

• BACK VIEW
  

NOTE: Bolts, nuts, and washers for parts assembly included. Mounting hardware available separately

ASSEMBLY INSTRUCTIONS

INSTALLING MIRROR ON WALL OR POST

1. Attach offset bracket to wall or post. (See Figure 1)

2. Attach mirror to offset bracket and adjust angle.

3. Tighten screws on ball bracket to fix mirror in desired position.

4. You may discard the metal channel and base plate.

INSTALLING MIRROR ON COUNTER OR CEILING

1. Attach base plate to either counter or ceiling. (See Figure 2)

2.  Attach metal channel to base plate (use nuts, bolts and washers).

3. Attach offset bracket to other end of channel (use nuts, bolts and washers).

4. Attach mirror to offset bracket.

5. Tighten screws on ball bracket to fix mirror in desired position.

INSTALLING MIRROR ON WALL WITH METAL CHANNEL

1. Attach base plate to wall. (See Figure 3)
   

2. Cut end of metal channel; bend to right angle.

3. Attach metal channel to base plate (use nuts, bolts and washers).

4. Attach mirror directly to metal channel. Offset bracket can be discarded.

5. Tighten screws on ball bracket to fix mirror in desired position

Phone: 1-800-295-5510

Website: uline.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>