LAMAX Tones1 Bluetooth Headphones User Guide
- June 12, 2024
- LAMAX
Table of Contents
User Guide
Tones1
DESCRIPTION
- LED notifications
- Multifunction button
- Microphone
- Charging pins
PACKAGING CONTENT
1× LAMAX Tones1
1× Charging station
1× USB-C cable (0.3 m)
1× User manual
1× Safety Instructions
CONTROLS
| Switch on | Hold the multi-function button for 3 seconds |
|---|---|
| Switch off | Hold the multi-function button for 5 seconds |
| Play / Pause | Tap the multi-function button |
| Volume up | Double tap the multi-function button on the right handset |
| Volume down | Double tap the multi-function button on the left handset |
| Next track | Hold down the multi-function button on the right handset for 3 |
seconds
Previous track| Hold down the multi-function button on the left handset for 3
seconds
Answer call| Tap the multi-function button
End call| Hold the multi-function button for 1 second
Reject a call| Hold the multi-function button for 2 seconds
To activate the mobile assistant| Triple tap the multi-function button on the
left handset
SWITCHING ON
The headphones automatically switch on when removed from the charging station.
To switch on manually, hold the multi-function button for 3 seconds. An
audible notification will sound when switched on.
SWITCHING OFF
The headphones automatically switch off when inserted into the charging
station. To switch off manually, hold the multi-function button for 5 seconds.
An audible notification will sound when switching off.
PAIRING
- Remove the headphones from the charging station. The headphones will automatically connect to each other. One of the headphones will be the master and ready for pairing, this is indicated by a green flash.
- Switch on Bluetooth on your device and search for LAMAX Tones1 in the list of available Bluetooth devices. After successful pairing, an audio notification sounds and the LED on one of the headphones turns green and then goes off after a while.
If you have problems pairing, remove the headphones from the list of paired devices on your phone. Insert the headphones into the charging station and then remove them. Press the multi-function button on both headphones 5 times at the same time. Both
headphones will flash 5 times. Then pair them as described in step 1.
CHARGING
To charge the charging station, plug the cable into the USB-C port on the back
of the charging station and plug the other end of the cable into a USB power
supply with a maximum input voltage of 5 V and current of 2 A.
The LED will flash red when charging. When fully charged, the LED will glow
red. If the charging station is discharged, the LED will flash white 4 times.
PARAMETERS
| Wireless technology | Bluetooth 5.3 |
|---|---|
| Maximum pairing distance | up to 15 m |
| Supported codecs | AAC |
| Battery capacity in the handset | 30 mAh |
| Charging station battery capacity | 300 mAh |
| Playback time | up to 8 h on a single charge |
| Charging time of headphones | 60 minutes |
| Charging time of the charging station | 85 minutes |
| Weight of one handset | 4 g |
| Weight with charging station | 36 g |
Printing errors reserved.
Download the current version of the user manual here:
https://lamax-electronics.com/tones1/manual
https://lamax-electronics.com/tones1/manual
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>