SUPERATV RZR XP 1000 Primal Soft Cab Enclosure Upper Doors User Manual
- June 4, 2024
- SUPERATV
Table of Contents
SUPERATV RZR XP 1000 Primal Soft Cab Enclosure Upper Doors
INSTALLATION INSTRUCTIONS
Notes:
- Hook and Loop Fasteners should be applied at a temperature of 70°F or above.
- Installing and adjusting Soft Cab is easier with two people.
- When cleaning Soft Cab, use soap and water only. Do not use detergent, window cleaner, solvents.
- Do not use a dry cloth or rag on windows.
- Do not fold Soft Cab before storing. Zip windows closed and roll Soft Cab to store.
| sales@superatv.com| |
www.superatv.com
---|---|---|---
| 1-855-743-3427| | 8:00am – 8:00pm EST
M-Th
8:00am – 7:00pm EST Friday
9:00am – 2:00pm EST Saturday
Read instructions and view illustrations before beginning
_ **Thank You For Choosing**_
Liability Statement
SuperATV’s® products are designed to best fit user’s ATV/UTV under stock
conditions. Adding, modifying, or fabricating any factory or aftermarket parts
will void any warranty provided by SuperATV® and is not recommended.
SuperATV’s® products could interfere with other aftermarket accessories. If
user has aftermarket products on machine, contact SuperATV® to verify that
they will work together.
Although SuperATV® has thousands of satisfied customers, user should be aware
that installing lift kits, long travel, or suspension kits, tires, etc. will
change the ride of machine and may increase maintenance and part wear.
Operating any off-road machine while, or after, consuming alcohol and/or drugs
increases risk of bodily harm or death. No warranty or representation is made
as to this product’s ability to protect user from severe injury or death.
SuperATV® urges operators and occupants to wear a helmet and appropriate
riding gear at all times.
By purchasing and installing SuperATV® products, user agrees that should
damages occur, SuperATV® will not be held responsible for loss of time, use,
labor fees, replacement parts, or freight charges. SuperATV®, nor any 3rd
party, will not be held responsible for any direct, indirect, incidental,
special, or consequential damages that result from any product purchased from
SuperATV®. The total liability of seller to user for all damages, losses, and
causes of action, if any, shall not exceed the total purchase price paid for
the product that gave rise to the claim.
SuperATV® will warranty only parts provided by SuperATV®. Any damage or
problems with OEM housings, bearings, seals, or other manufacturers’ products
will not be covered by SuperATV®. SuperATV® parts and products are not
warrantied if item was not installed properly, misused, or modified.
Installing, adding, modifying, or fabricating any factory or aftermarket
product to your ATV/UTV may violate certain local, state, and federal laws. Be
advised that laws vary depending on town, city, county, state, etc. Use of
certain products on public streets, roads, or highways may be in violation
law. The Buyer is solely and exclusively legally and personally responsible
for any violation of the law by the installation or use of the product. You
must abide by all local, state, and federal laws, including but not limited to
vehicle safety, traffic laws, and ordinances. It is your responsibility to
know the laws and how they apply to you.
The Buyer is responsible to fully understand the capability and limitations of
his/her vehicle according to manufacturer specifications, warnings and
instructions and agrees to hold SuperATV® harmless from any damage resulting
from failure to adhere to such specifications, warnings and/ or instructions.
The Buyer is also responsible to obey all applicable federal, , state, and
local laws and ordinances when operating his/her vehicle while using this
product, and the Buyer agrees to hold SuperATV® harmless from any violation
thereof.
passenger side installation shown
repeat
steps for driver side
- Place Hook and Loop Fastener at bottom of Cage, in location shown, and route to top of Cage in location shown.
- Mark end point onto Hook and Loop Fastener; approximately 51”.
- Cut Hook and Loop Fastener.
- Peel backing from Hook and Loop Fastener and install to Cage.
leave straps on Soft Cab loose
- Place Hook and Loop Fastener at bottom of Cage, in location shown, and route to top of Cage in location shown.
- Mark end point onto Hook and Loop Fastener; approximately 22-1/2”.
- Cut Hook and Loop Fastener.
- Peel backing from Hook and Loop Fastener and install to Cage.
leave strap on Soft Cab loose
- Cut Hook and Loop Fastener to fit remaining portion of Cage.
- Peel backing from Hook and Loop Fastener and install to Cage.
leave strap on Soft Cab loose
- Peel backing from Hook and Loop Fasteners.
wait 15 –
30 minutes for adhesive to setup
- Carefully open flap; use one hand to gently separate Hook and Loop Fastener from flap and plastic while opening.
- Apply more heat to Hook and Loop Fastener.
wait 15 –
30 minutes for adhesive to setup
- Carefully open flap; use one hand to gently separate Hook and Loop Fastener from flap and plastic while opening.
- Apply more heat to Hook and Loop Fastener.
cinch all straps down on Soft Cab
repeat steps for driver side
Windows must be rolled up when trailering machine
Documents / Resources
|
SUPERATV RZR XP 1000 Primal Soft Cab Enclosure Upper
Doors
[pdf] User Manual
RZR XP 1000 Primal Soft Cab Enclosure Upper Doors, RZR XP 1000, Primal Soft
Cab Enclosure Upper Doors, Soft Cab Enclosure Upper Doors, Cab Enclosure Upper
Doors, Enclosure Upper Doors, Upper Doors, Doors
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>