Silverstone EP02 Tek USB 3.0 to SATA Adapter User Guide

Silverstone EP02 Tek USB 3.0 to SATA Adapter

Hardware Guide

REAR VIEW

FRONT VIEW

Installation Guide

1. Connect SATA HDD/SSD to EP02. MS07 2.5″ HOD silicone case can use with EP02 for better protection
2. Connect the USB 3.0 cable to EP02, then plug it into your system.
3. Ready to use. *12Vdc power adapter required for 3.5″ HDD (not included)

SPECIFICATIONS

Warranty Information

This product has a limited 2 year warranty in North America, Europe, and Australia. For information on warranty periods in other regions, please contact your reseller or Silverstone authorized distributor.

Warranty terms & conditions 

1. Product component defects or damages resulted from defective production is covered under warranty. Defects or damages with the following conditions wiU be fixed or replaced under SilverStone Technology’s jurisdiction.

   • Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.
   • Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc … )
   • Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
   • Warranty mark/stickers are not removed or broken. Loss or damages resulted from conditions other than ones listed above are not covered under warranty.

2. Under warranty, Silverstone Technology’s maximum liabHity is Hmited to the current market value for the product (depreciated value, excluding shipping, handling, and other fees). SilverSlone Technology is not responsible for other damages or loss associated with the use of product.

3. Under warranty, SilverStone Technology is obligated lo repair or replace its defective products. Under no circumstances wHI SilverStone Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty, contract or negligence, even if Silverstone Technology has been advised of the possibility of such damages.

4. Warranty covers only the original purchaser through authorized Silverstone distributors and resellers and is not transferable to a second hand purchaser.

5. You must provide sales receipt or invoice with clear indication of purchase date lo determine warranty eligibility.

6. If a problem develops during the warranty period, please contact your retaner/reseller/SllverStone authorized distributors or SllverStone http://www.sllverstonetek.com.
   Please note that:

   • You must provide proof of original purchase of the product by a dated itemized receipt;
   • You shall bear the cost of shipping {or otherwise transporting) the product lo Silverstone authorized distributors. SilverStone authorized distributors will bear the cost of shipping (or otherwise transporting) the product back to you after completing the warranty service;
   • Before you send the product, you must be issued a Return Merchandise Authorization (“RMA”) number from Silverstone. Updated warranty information will be posted on SilverStone’s official website. Please visit http://www.sllvenrtonetek.com for the latest updates.

Additional info & contacts

• For North America (usasupport@silverstonetek.com)
  SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested. Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All products should be sent back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology in USA by first downloading the “USA RMA form for end-users” form from the below link and follow its instructions. https://www.silverstonetek.com/en/technical- support/

• For Australia only (support@silverstonetek.com)
  Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Please refer to above “Warranty terms & conditions” for further warranty details. SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238 (standard international call charges apply)

1. For Europe (support.eu@sllverstonetek.de)
2. For all other regions (support@silverstonetek.com)

WARNING:

Installation

Do not disconnect any cables or power sources while the connected hard drive(s) is/are active. This can result in data loss and possible damage to the hard drive. Please ensure that the hard drive(s) has(have) been connected to the adapter prior to connecting the EP02 to the host computer

Connect the Drive(s) to the Hard Drive Adapter

Hard drives and storage enclosures require careful handling, especially when being transported. If you are not careful with your hard disk, lost data may result. Always handle your hard drive and storage device with caution. Be sure that you are properly grounded by wearing an anti-static strap when handling computer components or discharge yourself of any static electricity build-up by touching a large grounded metal surface (such as the computer case) for several seconds.

Removing Connected Drives

Do not remove a connected hard drive while the drive is in use. To prevent data loss or damage to the drive(s), please follow the instructions below. Removing a connected drive safely requires that the drive not be in use. To ensure that this is the case, you can remove the drive in following ways:

1. Click on the Safely Remove Hardware icon, in your OS, and select Safely Remove USB Mass Storage Device.
2. You will be notified that it is safe to remove the USB Mass Storage device
3. Disconnected the USB cable from your host.
4. Disconnected the power adapter from electrical outlets
5. Disconnected your hard drive.

Limitation of Liability

In no event shall the liability of Silverstone Technology Co., Ltd..(or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some countries do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

FREQUENTLY ASKED QUESTIONS

What is the Silverstone EP02 Tek USB 3.0 to SATA Adapter?

The Silverstone EP02 Tek is a USB 3.0 to SATA adapter that allows you to connect SATA-based storage devices to a computer using a USB 3.0 port.

What types of storage devices can I connect using this adapter?

You can connect SATA-based storage devices such as 2.5-inch and 3.5-inch hard drives, solid-state drives (SSDs), and optical drives.

What is the main purpose of the EP02 Tek USB 3.0 to SATA Adapter?

The main purpose is to enable you to access and use SATA storage devices externally, even if your computer doesn't have internal SATA connectors available.

Does this adapter support USB 3.0 speeds?

Yes, the adapter supports USB 3.0 speeds, which offer faster data transfer rates compared to USB 2.0.

Is this adapter compatible with USB 2.0 ports?

Yes, the adapter is backward compatible with USB 2.0 ports, but the data transfer speeds will be limited to USB 2.0 rates.

Is the adapter compatible with both Windows and macOS systems?

Yes, the adapter is typically compatible with both Windows and macOS operating systems.

Does the Silverstone EP02 Tek adapter require external power?

No, the adapter is often powered by the USB connection itself and doesn't require an external power source.

How do I use the adapter to connect a SATA drive?

You would typically connect one end of the adapter to your SATA drive and the other end to an available USB port on your computer.

Can I use this adapter for data recovery purposes?

Yes, this adapter can be useful for accessing and recovering data from old or malfunctioning SATA drives.

Is there any software required for this adapter to work?

Usually, no additional software is required. The adapter should work as a plug-and-play device.

Can I use this adapter for cloning or copying data between drives?

Yes, you can use the adapter for cloning or copying data between SATA drives.

What is the maximum capacity of SATA drives that this adapter can support?

The adapter should support SATA drives with capacities up to several terabytes, as long as the drive itself is supported.

Does the adapter support UASP (USB Attached SCSI Protocol) for faster transfers?

The support for UASP can vary, but some versions of this adapter might offer UASP support for faster data transfers.

Can I use this adapter for connecting SATA-based optical drives like DVD or Blu-ray drives?

Yes, you can use the adapter to connect SATA optical drives for reading discs or other purposes.

Download the PDF Link:Silverstone EP02 Tek USB 3.0 to SATA Adapter- featured

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>