SCOSCHE BASECHARGE MS PB Magsafe Folding Charge Stand with Power Bank Instruction Manual
- June 12, 2024
- Scosche
Table of Contents
SCOSCHE BASECHARGE MS PB Magsafe Folding Charge Stand with Power Bank
3-in-1 MagSafe® Compatible Folding Charge Stand with Removable Wireless Power Bank
INCLUDED ELEMENTS
- MagSafe® Compatible Charger for iPhone 12 and Later
- Chargeur compasble MagSafe pour iPhone 12 et de version ultérieure
- Removable Magnetic Wireless Power Bank
- Cable Routing Channel
- Illuminated Base with Touch Control
- Slide-On Holder for Apple Watch
- Magnetic Fast Charger to USB-C (charger not included)
- Apple Watch® a USB C
- Power Adapter Input (48W power adapter with 5 ft. cable included)
- 15W USB-C Charge Port
- Port de recharge USB-C de 15 walts
- Adaptador Magicong
- Mounting Template
- Cleaning Wipe
Getting Started
Unfold the charging stand (A). Connect the included power adapter to the unit (B), and plug the adapter into a wall socket. The unit will power on automatically. Illuminated Base with Touch Control Touch anywhere on the stand’s neck (C) to control the light as follows: Turn the light on/off. Tap once Increase/decrease brightness: Tap and hold Hold 5 seconds for low to high or high to low Disable light feature: Tap and hold for 10 seconds Light feature will not resume function until enabled* Enable light feature: Tap and hold for 5 seconds
Note: The light feature does not indicate whether the phone is charging
or charged. Use the battery indicator on the phone’s somen to check the charge
status. Base illuminée avec commande tactile
Slide On Holder for Apple Watch
Note: For use with Magnetic Fast Charger to USB-C (not included).
- Route the charger cable through the opening in the holder (A), and slide the holder onto the charging stand (B).
- Seat the magnetic charger in the holder (C), and route the charger cable into the guide channels in the holder and in the back of the stand (D).
- Plug the charger cable into the USB-C port (E).
REMOVABLE POWERBANK
Use the base to charge the power bank Remove the power bank from the base as shown (A).
- Charging Contacts
- Charge Level Button (Press to display charge level LEDs).
- USB-C Input/Output Charge Port
- Charge Level LEDs (4 LEDs Illuminate in sequence to show charge level.)
- Wireless Charge Area For optimal performance, fully charge the power bank to 100% before using iPhone 12 or Later (with optional MagSafe Case)
- If using a case, it must be a MagSafe case (not included) for GoBat to function properly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>