SCOSCHE BASECHARGE MagSafe Compatible Wireless Power Bank Instruction Manual
- June 12, 2024
- Scosche
Table of Contents
SCOSCHE BASECHARGE MagSafe Compatible Wireless Power Bank
OVERVIEW
MagicRing Installation on Non-MagSafe Devices
Case required. Manufacturing materials do not allow adhesives to bond directly
to the device. Clean the surface of the case using the supplied wipe. Use
included template to accurately position MagicRing on the device.
Foreign Object Detection (FOD)
If a metal object is detected on either wireless charger (stand or base) the
light surrounding the base will pulse slowly. When the object is removed, the
normal function will resume.
Note : The FOD light pattern functions even if the light feature has been
disabled (see previous section).
SPECIFICATIONS
- Charging Stand
- Input: 12V=== 4A, 48W
- Wireless: 5W / 7.5W / 10W
- Pogo Pin: 9V=== 1.5A, 13.5W
- USB-C: 5V=== 3A, 15W
- LED Light: 3.5W
- Removable Powerbank
- Battery Capacity: 5,000 mAh
- USB-C Input: 5V=== 2A
- USB-C Output: 5V-== 2A
- Wireless Output: 10W Max.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: changes or modifications to this product not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Canadian Compliance Statement
This device contains license-exempt transmitter(s)/ receivers) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Scosche Industries
1550 Pacific Avenue
Oxnard, California 93033
Phone: 800-363-4490 ×1 /
805-486-4450 ×1
www.scosche.com
2023 Scosche Industries
Scosche & BaseCharge are trademarks of Scosche Industries.
Other marks or brands are the property of their respective owners.
Devices and or appearance may vary. Designed in Oxnard, California SI MSOSPB
4/23
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>