SCOSCHE BASECHARGE MagSafe Compatible Charger with Power Bank User Manual
- June 12, 2024
- Scosche
Table of Contents
SCOSCHE BASECHARGE MagSafe Compatible Charger with Power Bank
USING BASE CHARGE
MagicRing Installation on Non-MagSafe Devices
*Case required. Manufacturing materials do not allow adhesives to bond directly to the device.
Clean the surface of the case using the supplied wipe. Use included template to accurately position MagicRing on device.
Foreign Object Detection (FOD)
If a metal object is detected on either wireless charger (stand or base) the light surrounding the base will pulse slowly. When the object is removed, normal function will resume. Note: The FOD light pattern functions even if the light feature has been disabled (see previous section).
Specifications
- INPUT: 12V 48W
- Wireless Puck: 5W/ 7.5W / 10W
- Wireless Base: 5W 17.5W / 10W
- USB-C: C:5V 3A,15W
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subjed to the
following two conditions: (1) This device may not cause harful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. Warning: changes or
modifications to this product not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/IV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Canadian Compliance Statement
This device contains licence-exempt transmitters//receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence exempt RSSs).
Operation is subject to the following two conditions: (1) This device may not
cause interference (2) This device must accept any interference induding
interference that may cause undesired operation of the device.
This equipment complies with IC R$S-102 radiation exposure limits set forth
for an uncontrolled environment This equipment should be installed and
operated with minimum distance 20 am between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Scoschelndustries
- 1550PacificAvenue Oxnard,California93033
- Phone: B00-363–4490×1 / 805-4B6-4450×1
- www.scosche.com
Scosche &Baselyn are trademarks of Scosche Industries
Othermarksorbrandsarethepropertyoftheirrespectiveowners.
Devir.esandorappe.irancemayvary.
Designed In Oxnard, California
SI MSQS4/23
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>