HUANANZHI X58-RX2.0 Motherboard User Manual

HUANANZHI X58-RX2.0 Motherboard

SAFETY PRECAUTIONS

• Products could probably be damaged due to electrostatic discharge(ESD). Please follow these steps below for a successful computer assembly.
• Make sure all parts are firmly connected; otherwise, it might lead to the failure of recognizing components or starting the computer.
• In order to prevent products from being damaged by ESD,
• please make sure to discharge your body static by touching other metal objects before taking the motherboard out of box.
• Hold the border of motherboard when taking it out. Do not touch the sensitive parts of motherboard.
• Please put the motherboard in an anti-static container or on anti-static pad if not needed.
• Before turning on the computer, make sure all parts inside the case are firmly connected without any loose screws or metal components.
• Do not start the computer before installation finished, otherwise it might result in permanent damage to the computer parts or even injury to the user.
• If you need any assistance in the process of installation，please contact our after-sales customer service or reach us on
• HUANANZHI official
• E-mail:business@huananzhi.com. for professional technical support.
• Prior to installation or disassembly, please switch off the power and pull the power cable from the socket.
• Keep the motherboard away from moisture.
• Keep the user manual for future reference.
• Before plugging the power supply, please make sure the socket provides the corresponding voltage.
• In any of the following situations, please keep the motherboard and power cable in a safe place. Do not put anything onto the power cable.
• In the event of any of the following conditions, have the board checked by a service technician: Liquid penetrated into the computer. Motherboard is exposed to moisture.
• The motherboard does not work even if you follow the instructions on user manual.
• Motherboard fell off to the ground and got damaged. Motherboard has clear signs of damage.

PACKING

Please confirm that the motherboard is properly packaged upon purchase of the product. If there is any damage to packaging or lack of accessories, contact us as soon as possible.

1. HUANANZHI X58-RX 2.0 Motherboard
2. SATA data cable
3. 1/O shield back plat
4. Warranty card

BRIEF INTRODUCTION

Features

• CPU: Intel ® LGA1366 Generation Intel •Xeon®
  • Intel ® LGA1366 Generation Intel ® Core™
• RAM: 2*DIMM supports up to 32GB DDR3
  • 1333/1066/800MHZ Non-ECCmemory
  • Two-Channel Memory Architecture
  • Actual memory data rate depends on CPU type and DRAM module
  • 1/O effects: 4 x SATA2.0 (maximum transfer speed up to 6GB/S)
  • 6 × USB2.0 ports
  • 1 x PS/2 Mouse and Keyboard port
  • 1 × RJ45 Network card interfacet
• Audio: Realtek Audio Transcoder
  • Realtek 5.1 Channel High Fidelity Audio
• Audio output: Front Out/Front Speaker Out
• Audio input: Microphone input, Audio input
• Ethernet: 1 x Realtek 1000MB/S Ethernet
• Expansion slot: 1 x PCle 2.0 x16 1 x PCIe 2.0 x1

MOTHERBOARD IMAGE

1-1 X58-RX 2.0 Motherboard illustration
Rear I/O Panel

1-4 Audio Port Configuration

Installation And Settings

NOTICE: please check the motherboard where all pins marked with number “1” or white bold line are position “1” 2-3 Expansion Ports

2-6 USB3.0 Interface 2-6 CPU Installation

In order to properly place the CPU in the motherboard, the surface of the LGA1366 CPU has two pairs of starting points and a golden triangle. The golden triangle indicates Pin1

1. Pull the clips on both ends of the memory slot outward, and the memory strip corresponds to the protruding position of the slot to determine the direction of installation.
2. Align the memory module into the slot and press
3. Let the snaps on both ends of the slot automatically bounce

2-7 Memory Installation

1. Use a screwdriver to remove the bezel and screws on the main unit
2. Need to pick up the card slot of the card slot when installing the graphics card
3. Insert the graphics card into the card slot of the graphics card
4. After the installation is in place, the chuck will automatically return to its position.
5. Secure the graphics card to the chassis with screws
6. Install the power cord

2-8 Graphics Card Installation 2-9 SATA Interface

Drivers installation

Drivers listing:

Intel Chip Information Installation
Run “Control Panel – System – Hardware – Device Manager” Click the right mouse button to change the driver’s hardware device and proceed with the installation below: Option: Propertyl – Update driverl – Not connect to Internet – Manually installation Find the corresponding directory Select “Next step”
Audio driver installation
Before this installation, please check the model of the audio chip on the motherboard first(you may refer to thismanual), Select the proper driver accordingly for installa- tion.
Audio driver installation (take HD Audio series for example)
Run “driver installer”: /X58 HD AUDIO/Vista_Win7R267/WDM R267.exe Click on “next”to continue,and then”finished” The system will automatically restart itself to finish the installation
Uninstallation of audio driver(take HD Audio series for example)
Getting into Windows desktop, choose “setting”/ “control”,and then “add/remove programs”. Later, choose “Realtek High Defi- nition Audio Driver” in the menu and click on “add/remove”so that the driver will be automatically removed.
Driver installation of external video card
Run “driver installer”, take Setup.exe, click on “next”- “yes” -“next” “next”and”finished” The system will automatically search for devices to complete the installation
Driver installation of network
Run “driver installer”:X58 LAN/WIN7/XP/setup.exe clickon “next”_ “installation”-“finished” and restart the computer, the system will automatically search for devices to complete the installation.

BIOS Settings

In order to enable the computer to work well or execute specific functions, CMOS SETUP normally stores all kinds of data in CMOS SRAM of the motherboard. When the computer is shut down, motherboard’s battery will supply power to CMOS SRAM. When the computer is turned on and starts POST(Power On Self Test), press “Delete/Del” key to enter into AMI BIOS CMOS SETUP main page. Motherboardwarm boot key is “F7”  Menu: please pay attention to every option in the settings menuWhen there is a triangle shaped symbol on the left side of menu, it means that you choose this sub-menu,so a pop-up sub-menu will be available.

Main Menu Function

Main/Advanced/Chipset/Boot/Security/Save Exit

• Main
• System Overview
  • Date/Time settings, HDD specs/Monitor type settings.
• Advanced
  • Advanced Settings
  • BIOS special function settings, such as virus alert, booting disk
  • priority etc.
• Chipest
  • Advanced Chipest Settings
• Boot
  • Boot Settings
• Security
  • Security Settings
• Save
  • Save Setting
• Exit
  • Exit Options
  • Exit settings include loading of optimized defaults value/
  • loading of fail-safe defaults / discarding changes/ exiting
  • without saving. Exit settings include loading of optimized
  • defaults value/ loading of fail-safe defaults / discarding
  • changes/ exiting without saving.

SZ HUANAN SANXIAN TECHNOLOGY CO.,LTD. WWW.HUANANZHI.COM.

References

• 华南金牌官网

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>