nedis WIFIACMB1WT Series Wi-Fi Smart Air Conditioner User Manual

: June 4, 2024
: nedis

Table of Contents

Wi-Fi Smart Air Conditioner
Intended use
Safety instructions
Installing the product
Installing the Nedis SmartLife app
Specifications
Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

WIFIACMB1WT Series Wi-Fi Smart Air Conditioner
User Manual

nedis WIFIACMB1WT Series Wi-Fi Smart Air Conditioner

|

---|---

ned.is/wifiacmb1wt9

|

ned.is/wifiacmb1wt12

nedis WIFIACMB1WT Series Wi-Fi Smart Air Conditioner - Figure
1 |
---|---
|

Wi-Fi Smart Air Conditioner

WIFIACMB1WT9
WIFIACMB1WT12

For more information see the extended manual online:
ned.is/wifiacmb1wt9 | ned.is/wifiacmb1wt12

Intended use

The Nedis WIFIACMB1WT9 | WIFIACMB1WT12 is a mobile air conditioner used for cooling and dehumidifying rooms.
The product can be controlled with the Nedis SmartLife app via a Wi-Fi connection from any location.
The product is exclusively intended as a mobile air conditioner for domestic, and indoor use.
The product is not intended for professional use.
Any modification of the product may have consequences for safety, warranty, and proper functioning.

Main parts (image A)

1 Continuous drainage outlet	9 Exhaust hose
2 Air outlet	10 Exhaust nozzle
3 Manual drainage outlet	11 Exhaust hose connector
4 Power cable	12 Window kit
5 Power cable storage	13 Remote control
6 Air intake	14 Window kit fasteners
7 Swing louvers	15 Exhaust nozzle screw
8 Control panel

Safety instructions

WARNING

Thoroughly read all warnings.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Only use the product as described in this manual.
This product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the product in a safe way and understand the hazards involved.
Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision.
Close supervision is necessary when the product is used by or near children, animals, or infirm persons. Do not allow children to play with it or touch it.
Keep the product out of reach of children.
Do not use a damaged or defective product, but return it for repair or replacement.
Do not expose the product to water, rain, moisture, or high humidity.
If the product is immersed in water, do not touch the product or the water.
Shut off the main power grid and carefully remove the plug from the power outlet.
After the product has been immersed or covered in water or other liquids, do not use the product again.
Keep the product away from heat sources. Do not place the product on hot surfaces or near open flames.
Do not use the product near explosive or flammable materials.
Do not insert any objects into the product.
Do not obstruct or cover the product’s air inlet or outlet grid.
Always disconnect the product from the power outlet when cleaning or moving the product.
Do not pull the power cable to move the product.
This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
Disconnect the product from the power outlet and other equipment if problems occur.
Turn off the main power switch before unplugging the power cord.
Do not use the product when the cord or plug is damaged.
Make sure that the electrical supply in your area matches a voltage of 220 – 240 VAC and a frequency of 50 Hz.
Connect to a grounded socket only.
If necessary, use an earthed extension cable of a suitable diameter.
Fully extend the power cord and make sure the power cord does not contact the product.
When using an extension cord, use one which is as short as possible and fully extended.
Do not use external timers or remote control systems to switch the product on or off.
Ensure people do not trip over the cord.
Make sure that the power cable cannot become entangled and does not hang over the edge of a worktop.
Do not leave the product unattended when switched on.
R290 is a refrigerant gas that complies with European directives on the environment.
Be aware that refrigerants can be odorless.
Place the product in an area without any continuous sources of ignition (for example open flames, gas or electrical appliances in operation).
Only install, operate and store the product in a room with a floor area above 11 m2.
Only store the product in a well-ventilated area.
Store the product in such a way as to prevent mechanical failure.
When the product is installed, operated, or stored in a non-ventilated area, make sure the room is designed to prevent the accumulation of refrigerant leaks resulting in a risk of fire or explosion due to ignition of the refrigerant caused by electric heaters, stoves, or other sources of ignition.
Only persons with a currently valid certificate from an industry-accredited assessment authority, which authorizes their competence to handle refrigerants safely in accordance with an industry-recognized assessment specification, can work on or break into a refrigerant circuit.
Servicing can only be performed as recommended by the equipment manufacturer. Maintenance and repair requiring the assistance of other skilled personnel can only be carried out under the supervision of a person competent in the use of flammable refrigerants.
When defrosting and cleaning the product, do not use any means other than those recommended by the manufacturing company.
Do not puncture or heat any part of the refrigerant circuit.

Installing the product

Place the product on a stable and flat surface.
Leave a minimum of 0.5 m space around the air inlet and outlet to allow a good circulation of airflow.
Only move the product in an upright position.
If the product has been tilted, allow it to stand upright for 2 hours before plugging it in.

Assembling the exhaust (image B)
Only use the provided exhaust hose.
Do not block the exhaust hose, this may cause overheating.
1. See image B.

Assembling the continuous drainage (optional)

Open the continuous drainage outlet A1.
Connect A1 to a water container or drainage system (not included).

Installing the Nedis SmartLife app

Download the Nedis SmartLife app for Android or iOS on your phone via Google Play or the Apple App Store.
Open the Nedis SmartLife app on your phone.
Create an account with your mobile phone number or your e-mail address and tap Continue.
You will receive a verification code on your mobile phone or e-mail address.
Enter the received verification code.
Create a password and tap Done.
Tap Add Home to create a SmartLife Home.
Set your location, choose the rooms you want to connect with, and tap Done.

Using the control panel (image C)

C7	Switch the product on or off.
C6	Switch between cooling, dehumidifying, and fan mode.
C2	Switch between high, middle, and low fan speed. In dehumidifying mode,

pressing C2 switches the fan to low speed.
C1| Press C1 and use C3 and C5 to set the duration of cooling.
C4| Display
C8| Indicates that the cooling mode is active.
C9| Indicates that dehumidifying mode is active.
C10| Indicates that the fan mode indicator is active.
C11| Indicates that the water reservoir is full.
C12| Indicates that the temperature is set in Celsius (°C).
C13| Indicates that the temperature is set in Fahrenheit (°F).
C14| Indicates that timer mode is active.
C15| Indicates that the product is in sleep mode.
C16| Blinks indicate that the product has been reset.
C2,3| Press C2 and C3 simultaneously in cooling mode to switch to sleep mode. The air conditioner will work quietly and in energy-saving mode.
C3,5| Press C3 and C5 in cooling mode to set the desired temperature. Press C3 and C5 simultaneously to switch between Celsius (°C) and Fahrenheit (°F).

Adding the product to the SmartLife app (image D)

Switch on the product.
Tap + in the Nedis SmartLife app.
Select the device type you want to add from the list.
Confirm the Wi-Fi indicator LED Cu is blinking fast, or hold the Fan button C2 for 5 seconds to reset the product.
Follow the instructions in the Nedis SmartLife app.
Make sure you connect the product to a 2.4 GHz Wi-Fi network.
Rename the product after it has been found and added.
After confirming you can control the product with your smartphone.

For more information about how the app works, consult the extended manual online.
To connect your SmartLife account to Amazon Alexa and/or Google Home, set it up using the “Smart Life” action or skill. For more details check the instruction on either Amazon or Google.

Specifications

Product	Wi-Fi Smart Air Conditioner
Article number	WIFIACMB1 WT9
Dimensions (I x w x h)	420 x 360 x 720 mm
Weight	28 kg
Input voltage	220 – 240 V – 50 Hz
Required power	1010 W
Energy class	A
Energy efficiency ratio (EER)	3.
Noise level	..5 65 dB
Cooling capacity	9000 BTU
Room size capacity	42 – 60 m3
Air circulation	400 m3/h
Dehumidification	28 l/day
Refrigerant	R290 / 230 g
Power plug	Schuko CEE 7/7
Max. radio transmits power	802.11 b
802.11g	14.5 dBm
802.11 n (20 MHz)	13.5 dBm
Antenna gain	2.5 dBi
Frequency bandwidth	2412 – 2472 MHz

Declaration of Conformity

We, Nedis B.V. declare as manufacturers that the product WIFIACMB1WT9 | WIFIACMB1WT12 from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety data sheet if applicable) can be found and downloaded via webshop.nedis.com/wifiacmb1wt9#support | ebshop.nedis.com/wifiacmb1wt12#support

http://ebshop.nedis.com/wifiacmb1wt12#support

For additional information regarding compliance, contact customer service:

Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands

Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch
The Netherlands