Bed Bath Beyond 65342eee04993bef Medicine Cabinet Instruction Manual
- June 12, 2024
- BED BATH BEYOND
Table of Contents
Bed Bath Beyond 65342eee04993bef Medicine Cabinet
TOOLS REOUESTED
INSTALLATION PACKAGE KIT INCLUDED
PRODUCT FUNCTION INSTRUCTIONS
- Touch key to turn on/off defogging function.When defogger is on, the buon should be in blue color. The an-fog funcon can only be used aer 5 minutes of turning on, and will automacally cancel aer 60 minutes of standby. If extended use is required, it must be re-enabled.
- After power on, the button shows blue and it is in waiting state.
- The lighting color temperature will be changes with each short press
- Click the light buon to turn on and the color changes to white
- Click again to change the light color
- Click the fourth me to turn off the light
- Long press to adjust the brightness Long press to make the light gradually dims
- Long press again and the light gradually brightens
When you adjust to your favorite color temperature, long press the buon, you can adjust the brightness of the color temperature, click again, you can adjust to another color temperature.
- Memory funcon: The medicine cabinet will record the color temperature and brightness of your last use. When you turn off the color and brightness aer using it last me, when you use.
60-inch Installation
Step 1
Unpack all the packaging, take out the mirror cabinet, and put it together to
measure the total size of the mirror cabinet combination
- Level and mark the cabinet’s location on the wall.
- Fix Top Mounting Bracket on the Wall
Step 2
- Measure the distance between the holes in the Top Mounting Bracket.
- Hanging the Cabinet on the top mounting Step 3 bracket. Make sure top brackets are locked in the grooves.
Step 4
- Connect the wire to Junction Box inside the wall.
The electric wire comes through the access hole on the top of the cabinet, exact location of access hole varies depending on the product models. Please refer to the actual product for the exact location.
ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENCED ELECTRICIAN.
WARNING: Shut off power before wiring the cabinet. Requires 120 VAC 20
Amp GFI protected Circuit.
GROUNDING INSTRUCTIONS
CAUTION: This product must be connected to a grounded metal permanent
wiring system or an equipment-grounding conductor must be run with the circuit
conductors and connected to the equipment grounding terminal or lead on the
product.
WARNING: An Electrical option cabinet must be wired to a 20 Amp GFI
(Ground Fault Interrupter) protected circuit when used in bathrooms and all
other locations required by the National Electric Code.
Step 5
- Move the cabinet to the right position and screw in the bottom supporting bracket and fix it.
Step 6
- According to you own needs and preferences, adjust and install the height of the glass shelves, first insert the transparent glass clip, then put the glass shelves on the clip, pay attention to the level of the glass.
Step 7
- If the cabinet door does not close well or unbalanced, it is necessary to adjust the hinge.
