BED BATH BEYOND 69680544 Wireless Charging Bunk Shelf Instruction Manual
- June 6, 2024
- BED BATH BEYOND
Table of Contents
BED BATH BEYOND 69680544 Wireless Charging Bunk Shelf Instruction Manual
BUNK SHELF
STEP 1: Affix the clamp to your ideal position of the bed frame.
STEP 2: Adjust the rotary knob to tighten the clamp.
- This product is for household use only.
- This product is to be mounted to the bed frame.
- Maximum loading capacity: 20 lbs
WIRELESS CHARGING
Supports:
iPhone 11 Pro Max | 11 Pro | 11 | Xs Max | Xs | X | XR | 8 Plus | 8 Samsung
Galaxy S20 | S10+ | S10 | S10e | S9+| S9 | S8+ | S8 | Note 10 | Note 9 | Note
8 and other Qi enabled devices
Specification input: DC 5V 2.4A Wireless charging output
Connect the AC adapter to DC jack on the wireless charger, and plug into outlet.
Place Qi compatible device face up on the charging pad. Charging status will be indicated as per below:
- Solid blue light: Device is charging. Light will shut off 10 seconds after charging starts.
- Blinking blue light: Device is not charging. Reposition device.
- Blinking purple light: Foreign object on the charging pad. Please remove before charging.
CAUTION: Remove any metal protective case before charging your phone. Do not place magnetic or metal objects on charger during charging. Qi compatible phones with metallic looking finishes will charge normally.
FCC INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmfil interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Wireless charger manufacturer: Yulin Tech Co., Ltd
Adapter manufacurer: Dongguan Jingcheng Electronic Technology Co., Ltd.
Produced and assembled by: Dongguan Jiufeng Metal and Plastic Manufacturing
Ltd.
MADE EXCLUSIVELY FOR
BED BATH &BEYOND
650 LIBERTY AVENUE, UNION, NJ 07083
© BED BATH & BEYOND INC. AND ITS SUBSIDIARIES
www.bedbathandbeyond.com
www.bedbathandbeyond.ca
IMPORTADORA BBBMEX S. DE R.L. DE C.V. BLVD. MANUEL AVILA CAMACHO No. 3228 COL.
BOULEVARES, NAUCALPAN DE JUAREZ ESTADO DE MEXICO C.P. 53140 MEXICO
R.F.C.IBB-060425-DI8 55-5321-3000
MADE IN CHINA
SAVE THESE INSTRUCTIONS
Customer service: 1-800-266-6000
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC’s RF exposure guidelines, this equipment
should be installed and operated with a minimum distance of 12cm between the
radiator and your body.
The device has been evaluated to meet general RF exposure requirement. To maintain compliance with RSS-102 — Radio Frequency (RF) Exposure guidelines, this equipment shouldbe installed and operated with a minimum distance of 12cm between the radiator and your body.